offensive-security / kali-nethunter Goto Github PK

WPS attack just hangs at "0/0 success/ttl" using Wifite on every AP.

Hardware:
Nexus 5
TL-WN722N

I didnt see any credentials or request for them during openvas setup. Also there is no openvasad for adding more accounts.

When I click on Start Webserver - it opens up web browser to: http://127.0.0.1:8080/
and I get this error:

Webpage not available
The webpage at http://127.0.0.1:8080/ could not be loaded because:
net::ERR_CONNECTION_REFUSED

In combination with the HID keyboard attack i would like to host the payload. Is there a function to host it with the nexus itself?

When I Close Kismet and it logs the Data to the km file for Example, i can't find the file. Neither on the sdcard nor the usr/kismet/ location?

l0rdg3x@9a685c5

I just purchased this y otg cable (http://www.amazon.de/gp/aw/d/B00EJP5XR2?pc_redir=1412520992&robot_redir=1) but unfortunately it doesnt Charge my Phone?

On line 255:
openvas-setup && openvas-scapdata-sync && openvas-certdata-sync && openvas-check-setup && && openvas-stop
Please fix double &&

I'm attempting to dual-boot CM (primary) and NetHunter (secondary) using MultiROM.

It seems to properly install as an additional ROM, but when I attempt to boot it, MultiROM fails with an error and directs me to /sdcard/multirom_log.txt

Link to the log: http://pastebin.com/MTtfsL9V
Link to MultiROM issue: Tasssadar/multirom#28

When i start Blue Nmea with activated GPS and then Kismet, it doesnt get the GPS Data. Do i have to configure anything?

On a french Windows 7, the commands entered by nethunter are not good. Problem of layout :

M is ,
A is q
Etc...

I have successfully installed Kali-nethunter but the wifi has stopped working.
It is stuck on "Turning Wi-fi on"

In case you want to have sound work on the Kali Xfce Desktop here is fix / work-around.

The short of it is I could not get pulseaudio to work. Some error in main.c and the daemon not being able to run.

You will have to install iceweasel and vlc. You will need to remove pulseaudio and install alsatools instead. You will need to change the vlc settings to use alsa mixer as default.

Info adapted from: http://linuxg.net/how-to-properly-replace-pulseaudio-with-alsa-on-crunchbag-linux-and-debian-squeeze/

From Kali terminal (no need to do this from within vnc)
killall pulseaudio
apt-get remove pulseaudio pulseaudio-utils gstreamer0.10-pulseaudio libpulse-browse0 paman pavumeter pavucontrol
(some packages might not be installed so wont be removed)
rm ~/.pulse-cookie
rm -r ~/.pulse
apt-get install alsa-base alsa-tools alsa-tools-gui alsa-utils alsa-oss alsamixergui libalsaplayer0 iceweasel vlc

Make VLC run as root:
sed -i 's/geteuid/getppid/g' /usr/bin/vlc

Reboot device

Open VNC connection to Kali Xfce Desktop
Open VLC
Goto Tools -> Preferences
Click on Audio tab/button
Change Output module dropdown to: ALSA audio output
Change Device dropdown to: tegra rt5640 Default Audio Device
Save
Exit Vlc.
(might need to restart device)
Audio should now play through speakers.

This has only been tested on Nexus 7 - 2012. It should work for other devices, however Device might vary.

Since flashing NetHunter it's seems to take way longer to charge my Nexus 5?

Hi all,
just wondering if it would be feasible to integrate the p2p-adb framework (https://github.com/kosborn/p2p-adb/) either via the web interface or the kali-menu..

P.S this project keeps getting better and better ! <3

trying to encrypt after installing nethunter, my nexus7 2013 reboot without encrypting.

I have successfull installed NetHunter on my Nexus 5 Android L (LPV79) rooted and TWRP Installed, when i try start Kali Launcher, and try "Start Webserver" my device restarted,,,

then showing Android i Upgrading screen
Optimzing app 1 of 122

after finishing optimizing, i try start webserver again.. but its same.. restart again

Hey there binky long time no talk - I see you have been real busy :). I installed Nethunter on my Nexus 7 (2012) pwnpad version and ran into the following issue when I launched a kali terminal window I receive:
/system/bin/bootkali[51]: /data/local/bin/busybox: not found
and it also says root wasn't detected type su or install SuperSu to fix

SuperSU is installed and when I run the commands in the checkforroot function I get 0 which is what the if function is looking for.
Have you tried this on a pwnpad? if not which ROM work best?

Plz can anyone explaine step by step how to use net hunter bad usb.

When trying to launch beef from the Kali menu I only seem to get a CentOS Apache test page at 127.0.0.1.

After a successfull install throught the windows "all-in-one",

I've got only get 11,29gb available instead of 32gb !
so it least me less than 6gb after all the process....

Any idea ?

It's a NEXUS 7 - LTE - 32gb

Thanks

The attack itselfs starts and sends commands to the cmd shell, but instead of an '-' it is written a ß. I'm not quite sure if there are more letters wrong, but i noticed this one. Hope you are able to fix it soon :)

Hi All,

I have tried to look through forums to figure out how to run metasploit in Nethunter, but cannot find anything. I launch Kali via shell and type in msfconsole, but it sits there doing nothing, i tried looking for a way to exploit devices on wifi network, but can't seem to find anything,.

Could someone help me with this ?

Thanks
Bhav

Running on Nexus 7 (2013). Why is it that when running Terminal Emulator from APPS I can successfully execute WHOIS and NSLOOKUP but those same commands using "Launch Kali Shell in Terminal" results in "command not found"?

I ask because if I install and run something like the "Discover" scripts those basic commands fail.

Hi,

This problem is listed as a known bug / issue here:

http://nethunter.com/issues/

What I'd like to understand is the vision around it. What is required to get this resolved and what assistance can be provided with supplying any additional info that help with the resolution?

I have very limited expertise in low-level Linux / kernel development, but from what I understand this problem does not present itself when using a non-custom image (reference needed). Also, perhaps unrelated, I also came across https://timur.mobi/timurs-kernel-n7-2013/.

Furthermore, this page states:

http://nethunter.com/prepare/

"...You should also make sure your Nexus is fully updated to the latest Android version before proceeding (4.4.4 at the time of this writing for all images, except the Nexus 7 2013 model, which is at 4.4.3)..."

The 4.4.4 (KTU84P) image is available for Nexus 7 (2013) over here:

https://developers.google.com/android/nexus/images

Should I try and flash my N7 with 4.4.4 (KTU84P) and then install NetHunter?
Is there anything else that can be attempted?

Also, partially related to #57.

I'm in france and the HID attack works well except that it's sending strocks as a US layout. Would it be possible de specified the layout ?

Hi,
after flashing my nexus 5, the phone doesn't boot past the Google logo... The phone is unlocked, has TWRP 2.8.0.1 installed and the zip files sha1sum checks out. It previously had cyanogenmod with encryption enabled

I already had superuser and clockworkmod installed. While installing nethunter there was an error right after chroot was installed. Something not found in kernel, I think. Now the webserver is not starting. Superuser grants permissions, browser starts with "Google chrome's connection attempt to 127.0.0.1 was rejected". Pity

Kali menu seems to not show into Application Menu in XFCE.
A fix that worked for me was to reinstall kali-menu package:
apt-get remove kali-menu
apt-get install kali-menu

ps: Nexus 7 2012 image

When running WiFite, NetHunter is able to enumerate wireless devices just fine. When you move onto a WPA attack and attempt to get a handshake the tablet reboots and sits at the Google screen.

Nexus Device: Nexus 7 (2013)
WiFi Antenna: ALFA AWUS AWUS051NH

I need alink to explain step by step how to use it I click start bad usb conect usb to pc gateway of pc change to 10.0.0.1 and I stop here don't know what to do next
Thank a lot

Scenario - choose 6) exploit tools and then 0) to return to main screen - you get an incorrect error and it exits to terminal.

I'm expierincing some freezes when i start the camera. Is it possible that the Kernel mod is responsible?

So when I select "start webserver" it shows the app is given root permission but then nothing happens. Ive tried re-flashing and nothing helps. Any suggestions? Also when I launch the kali terminals it says "can't execute '/bin/bash' : No such file or directory" Thanks

Well I can't use my tp link because of this kernel panic or issue with the firmware or anything

Notice when loading msfconsole that device will crash, screen goes blank and I need to long press power to restart device.
Upon fresh restart I was able to finally load msfconsole, however device crashed within 5 mintues.

Using Spirit Rom 4.4.4

Is there a prefered/optimal rom to use with Nethunter?

Hey everyone,
How exactly do clients connected to the Evil AP get internet access and browse the web? When I have done this on other devices like the WiFi Pineapple, it was my recollection that we need two interfaces. One to broadcast the SSID and have clients connect to us, and the other as a bridge to the internet. Which interface acts as a bridge? The built in WiFi radio in the Nexus?

Pressing 0 on the Exploitation Menu quits out.

OpenVPN Menu mentions 1-6 options

Pressing 0 on the OpenVPN Menu, takes you to the settinga menu.

Device crashes and restarts when BadUSB MITM Attack is started.

Device info: Nexus 7 - WiFi (2012),Stock Android 4.4.4. KTU84P

I read on http://www.kali.org/kali-linux-nethunter/ :

"I switched on my NetHunter and was immediately surrounded by beautiful women, it was amazing."

I have switched on my NetHunter (Device Nexus 10) and i have been waiting for 4 hours but not beautiful women arrived.

Thank you for everything. Well done everybody. Keep up !

I've been trying to resolve this issue for many hours. BadUsb creates the rndis on windows 7 but just displays the cable unplugged symbol. I've tried on different laptops, different cables and still the same issue. Tried reinstalling nethunter, reflashing nexus and reinstalling. Just updated with android 4.4.4 rom and installed nethunter. Reinstalled windows 7 on laptop. All with same result, also tried on windows 8 laptop. Would you possibly have any ideas how I could resolve this please.

Fresh install of factory images for Nexus 4 from:
https://developers.google.com/android/nexus/images

Unlocked bootloader and rooted devices.

Device boots system partition without problem.

Installation of Kali Nethunter (for Nexus 4 experimental) from:
http://www.offensive-security.com/kali-linux-nethunter-download/

After installation of Kali Nethunter, device goes into reboot loop. Does not want to boot system partition, it just reboots itself.

If there's anyway I can help with debugging problem, let me know.

I just installed nethunter on my Nexus 7 2013 LTE, after re-boot, Wi-Fi device is not getting detected. When I checked at settings -> Wi-Fi it displays "Turning Wi-Fi on..." message there.

Once in a while during normal usage of the device (e.g. messaging, calling ecc... ) the phone reboots, its happend to me around 3-4 times so far. /proc/last_kmesg indicates that its a kernel panic the full output is here http://pastebin.com/hsZGGHH3

This is a very minor issue but currently this file is owned by root:root and has to be changed to system:system to allow a user to change the wallpaper

Is there a Feature planned so that i can update the Kernel via the kali menu Terminal?

When trying to put my Alfa awus036h into Mon mode it freezes and restarts the system
Using stock 4.4.4 with kali zip
Also random restarts sometimes when plugging in the awus036h
Any ideas ?

I treid to install NetHunter on Nexus 10 running on Cyanogenmod. While installing i got an error:
set_perm: Some changes failed
E:Error in /data/media/0/Downloads/kali_linux_netxunter_nexus10.zip
it occurs right after "Mounting System..."