ESP32 S3 does not show up as wifi device after successfully flashing via browser about nuki_hub HOT 5 CLOSED

Please provide serial logs using a program like hterm

from nuki_hub.

Note that if the device was not erased and was used previously with any other firmware (e.g. ESPHome) it will just connect with previously saved wifi credentials and not open up the WIFI configuration portal.

from nuki_hub.

Thanks for your help. I definitly erased the device. This is the log after booting:

ELF file SHA256: 76d60dae6f83b890

E (329) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
Rebooting...
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0x28 (SPI_FAST_FLASH_BOOT)
Saved PC:0x40377c48
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3808,len:0x44c
load:0x403c9700,len:0xbd8
load:0x403cc700,len:0x2a80
entry 0x403c98d0
E (301) spi_flash: Detected size(4096k) smaller than the size in the binary image header(8192k). Probe failed.

assert failed: do_core_init startup.c:328 (flash_ret == ESP_OK)

Backtrace: 0x4037803a:0x3fceb180 0x403806c1:0x3fceb1a0 0x40386c19:0x3fceb1c0 0x4207b4fa:0x3fceb2f0 0x403779ab:0x3fceb320 0x403cd83b:0x3fceb350 0x403cdafa:0x3fceb380 0x403c9925:0x3fceb4b0 0x40045c01:0x3fceb570 |<-CORRUPTED

from nuki_hub.

Seems like something went wrong with flashing.
Please flash again using the web flash or if that doesn't work using the release binaries at https://github.com/technyon/nuki_hub/releases/tag/8.34

from nuki_hub.

@22chrs Were you able to resolve the issue?

from nuki_hub.