Another one with Battery discharge about nuki_hub HOT 8 CLOSED

There's nothing obvious in your settings. What could drain your battery is constant querying of the lock, but to confirm this you'd need to get serial or MQTT logs.

from nuki_hub.

In the supplied info nrRetry: is empty.
This translates to the Number of retries if command failed in Advanced Nuki Configuration page.
This might cause a loop?

Please check that Number of retries if command failed is set to a positive integer (3 is default)

from nuki_hub.

Thanks a lot for answering! @technyon I enabled MQTT logging but I cannot see anything here for the last 5 minutes

@iranl thanks a lot, I changed the setting. Will see if itmakes a difference!

from nuki_hub.

@technyon have you seen my remark before:

"What I can see in the MQTT Log that there are messages every 3 seconds on nuki/presence/devices."

Is this normal?

from nuki_hub.

Yes. Presence detection updates these values every few seconds. Presence detection works independently from the lock/opener (its a function of Nuki Hub, not the Nuki device) and does not cause battery drain on the Nuki device.

from nuki_hub.

Hi, after changing the setting the discharge of 2% a day seems still to be the case.

The lock is fully locked and unlocked 2 times a day and the latch is opened maybe 5 times a day.

Do you have a suggestion how I can diagnose this further?

from nuki_hub.

@spaggi If you don't see continuous messages coming in, that's how it should be. If there's constant querying of the lock (which drains the battery), each query will generate log messages. Keep observing the messages though, and best case keep a history of messages for a day or so.

Are you sure this is related to Nuki Hub? You could easily check by unplugging your ESP for some time and observe the battery.

from nuki_hub.

I will go on vacation soon so this will be a good time to monitor potential drain. Ill check the messages too. Thank you! For now I will close this as there might be nothing wrong

from nuki_hub.