Nuki Hub gets unavailable for a couple of hours a day - also tries to reconnect every minute afterwards about nuki_hub HOT 20 CLOSED

Same here. If mosquitto Broker output is needed please just tell.

from nuki_hub.

I suggest trying the latest PR with Arduino Core 3 and IDF 5.1.
Besides many changes to the networking stack it also includes nuki hub specific improvements regarding MQTT.

You can find the binaries here: https://github.com/technyon/nuki_hub/actions/runs/9711394389

Do note that these binaries need to be flashed using USB/serial once because of changes to the partition table.

from nuki_hub.

I tried flashing it with the Espressif Flash Download Tools, however it shows only 'null' in the command line and red fields in the UI

from nuki_hub.

I find that to be a horrible tool and exclusively use esptools.

See https://docs.espressif.com/projects/esptool/en/latest/esp32/installation.html or https://www.flamingo-tech.nl/2021/03/21/installing-and-using-esptools/ for how to install esptools.

You can just use the command in the how-to-flash.txt file. You only need to change the COM port.

from nuki_hub.

Worked now. Different machine, different tool. I will update here how stable it is

from nuki_hub.

Basically it works now. However, the main lock topic is unavailable

from nuki_hub.

Is there a solution to unknown state?

from nuki_hub.

I suggest trying the latest PR with Arduino Core 3 and IDF 5.1. Besides many changes to the networking stack it also includes nuki hub specific improvements regarding MQTT.

You can find the binaries here: https://github.com/technyon/nuki_hub/actions/runs/9711394389

Do note that these binaries need to be flashed using USB/serial once because of changes to the partition table.

with this binary, I cannot get a connection by ethernet anymore, specifically with a M5Stack Atom PoE Kit - W5500.
Nuki Hub does not respond anymore. If I disconnect it from the module, I can reach it by wifi.

from nuki_hub.

I can conform that core 3 breaks both W5500 and LAN8720 ethernet support. Please follow up regarding this in issue #416, not here.

from nuki_hub.

Lets keep this open until we have confirmation this is fixed in latest builds

from nuki_hub.

I just flashed the latest build (9876220444.1180.1), trying this now.

from nuki_hub.

Works like a charm since then!

from nuki_hub.

Thanks for reporting back.

Closing as completed

from nuki_hub.

Unfortunately I'm still having issues with the lock being unavailable.

While the builds from main are better. They still haven't fixed it for me!

MQTT just stays unconnected, despite the restart on disconnect option being ticked. Sometimes it's fine for days. Other times only a few hours. With 8.33 I never had this issue.

from nuki_hub.

@adamlc Could you get serial logs while this is happening?

from nuki_hub.

I'll see what I can do to capture them :)

from nuki_hub.

Just a quick update. I've now had different behaviour without any changes.

MQTT is now reported as connected but updates aren't sent and everything seems out of sync with HA. Unfortunately I've not been able to get any logs at the time it happens.

Because of the instability I've had to sadly revert to 8.33 as that was rock solid before. All the new improvements to 8.35 did look fantastic and I hope with some more time I can debug.

from nuki_hub.

@adamlc Which version are you on now?

from nuki_hub.

Back on 8.33 which has since been rock solid!

from nuki_hub.