compatibility issue with arduino 1.6.X - currently 1.6.5 about repetier-firmware-4-davinci HOT 8 CLOSED

seems there are some preprocessor issue arduino/Arduino#2665
and a 1.6.1 is on the way

from repetier-firmware-4-davinci.

using 1.6.0 affect printer even no usb connected, I was not able to keep heating more than 3 hours, got sensor defect, watchdog reset, ...

from repetier-firmware-4-davinci.

1.6.1 is now out but I doubt issue is solved as I still see testing builds for pre processor commands

from repetier-firmware-4-davinci.

I have also some weird compilation issues with 1.5.8 but I was able to work around - hope 1.6.2 will help

from repetier-firmware-4-davinci.

I do not see any update for the pre processor on 1.6.2

from repetier-firmware-4-davinci.

1.6.3 is out and 1.6.4 is cooking now - I have added the variant.cpp/usbcore.cpp for 1.6.3 it compile but I had to time to test -
Pls: be noted 1.6.3 and + need to use board manager to download/add Due board files, then you can change the files in user directory at least for windows, I did not check on linux/OSX

from repetier-firmware-4-davinci.

I use 1.6.5 without issue but printing from SD, I did not test print from Network neither USB

from repetier-firmware-4-davinci.

I close this one as no fix

from repetier-firmware-4-davinci.