[BUG] about repetier-firmware-4-davinci HOT 11 CLOSED

what is version display in system menu?
did you loaded failsafe eeprom settings after flash?

from repetier-firmware-4-davinci.

@torp105 Any update?

from repetier-firmware-4-davinci.

Sorry about the late reply. Just coming back from christmas break.

To answer your question the version is:
Da Vinci 1.0
1.21-02-08_1.1
Repetier 0.92.10M

from repetier-firmware-4-davinci.

oh yes and I did load failsafe eeprom settings after flash

from repetier-firmware-4-davinci.

you flashed davinci 1.0 but you mention you have a davinci 2.0A so there is a problem

from repetier-firmware-4-davinci.

OH! so... did I do something wrong in the Arduino coding section?

from repetier-firmware-4-davinci.

I guess, because result is Davinci 1.0 instead of 2.0A and pins are differents so it may explain why is not moving

from repetier-firmware-4-davinci.

What should I do?

from repetier-firmware-4-davinci.

edit configuration.h and modify according 2.0A

check readme , it explain what to change in configuration.h

from repetier-firmware-4-davinci.

Ok. I will try to do that today or tomorrow. But, I could have sworn that I did do that, but if the machine is saying I did it wrong then I must have done it wrong

from repetier-firmware-4-davinci.

Looks like that fixed it! I guess I just forgot to change something in configuration H. Now all I need to do is figure out how to get cura or some other slicer to work with it

Sorry for wasting your time and thank you for your help!

from repetier-firmware-4-davinci.