[FR]Add platformIO support about repetier-firmware-4-davinci HOT 8 OPEN

I gave this a run on my DaVinci AiO. Build, upload, and monitor works.

Nice one!

from repetier-firmware-4-davinci.

PlatformIO support is implemented but not tested - I have just checked the files are corrects

Patching happen once

I do not have bandwith to test right now so if anyone want give a try and report would be great 😸

Still need to modify src\ArduinoDUE\Repetier\Configuration.h according targeted printer
I will add corresponding env in platformIO.ini once PIO build is confirmed as Ok

from repetier-firmware-4-davinci.

This issue or pull request has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

from repetier-firmware-4-davinci.

great thank you for the feedback, I will add corresponding env

from repetier-firmware-4-davinci.

I presume the work to integrate platformio is to merge all your work into the dev2 Repetier (https://github.com/repetier/Repetier-Firmware/tree/dev2) branch, is that correct?

from repetier-firmware-4-davinci.

everything is different in Davinci : specific screen , specific screen resolution( 16x4 ), specific SPI, specific features (auto bed leveling , manual bed leveling, dripbox, extruder cleaner, key pad, thermistors tables, etc...)

I will integrate repetier 2.0 when stable but push all davinci specific to repetier is big work and has few chance to be accepted, only some features may be

no mention that Davinci 1.0(a)/2.0 (a) are now end of life I think, compare to recent xyz models

from repetier-firmware-4-davinci.

On a Mac, this complains there are no source files to build. It does build after changing src_dir to use forward slashes in platformio.ini:

src_dir = src/ArduinoDUE/Repetier

from repetier-firmware-4-davinci.

On my ArchLinux setup, this works smoothly with my davinci 1.0. Thank you for your work!

• platformIO core v6.1.4
• VSCodium 1.72.2
• XYZPrinting da Vinci 1.0(jumper J1)

from repetier-firmware-4-davinci.