The 1.1 edition of Vagrant Manager is now outdated & has refused PR updated. I've forked it & now version is at 1.2.3, with a version 2 release coming soon.

What's the process of updating the Electron JS app reference when apps move maintainers?

Instead of running a Heroku app to periodically publish to npm, we could use semantic-release to make it happen automatically whenever a PR is merged.

To do so, we'd just need to make sure that we always merge with "squash" and write semantic commit messages.

Currently: https://github.com/kimyearho/SharePod

https://github.com/electron/apps/blob/master/apps/sharepod/sharepod.yml

App page: https://electronjs.org/apps/sharepod

The page is not updated.
Why is that?

Hello,

Why not use Jekyll serving in GitHub Pages using Staticman for recive new project and create a markdown file.

Could I create a fork and do a pull request?

separe opensource apps from comercial

Hi! I tried to use two of the featured apps, namely Nylas Mail and Ramme, and they are both deprecated as projects and out of development. Just wanted to let you know! Thanks for the awesome website and your hard work! 🎉

https://github.com/KIvanow/janusWorkspaceNative leads to nowhere.

https://github.com/electron/electron-apps/blob/master/apps/janus-workspace/janus-workspace.yml

Hi guys,

I've submitted my app, jqi, few days ago. It was merged but I still cannot see it in apps list.
Can you advise please?

If repository is a GitHub repo, and website is also that same repo, website should be removed.

This will prevent this kind of redundancy:

cc @donokuda

Hi, I am working on https://github.com/AppImage/AppImageHub and I have noticed that our projects are doing a very similar thing - perhaps we could collaborate?

Similar to #262, but this would just make reviewing PRs a bit easier.

Currently, as a reviewer approving apps submission, I check the PR against the requirements listed in our contribution guide. The guide is super comprehensive, but a lot of the rules listed there are already automatically checked by tests as part of CI.

It will be very helpful to have a checklist of items that need human eyes & judgment. Better yet, have a bot that comments on each add app PR with said checklist so reviewers can check them off as they go!

Let's figure out a way to support apps that are npm-installed, like https://github.com/springload/screenshotron

Maybe a new npmPackageName property or something...

The bot is publishing new versions too frequently because of subtle changes in the order of content in the colors.json file.

Example: 9714913

Solution: Sort the slug keys in colors.json alphabetically before writing the file.

Example:

> mocha --reporter min test/human-data.js test/colors-spec.js && standard --fix

calculating good colors for white
calculating good colors for black
calculating good colors for white
calculating good colors for black
calculating good colors for white
calculating good colors for black
calculating good colors for white

  12967 passing (4s)
  1 failing

  1) colors should create entries with the expected properties:

      AssertionError: expected {} to have key 'white'
      + expected - actual

      -[]
      +[
      +  "white"
      +]
      
      at Context.it (test/colors-spec.js:57:13)
      at <anonymous>

https://github.com/electron/electron-apps/blob/master/apps/code-rpgify/code-rpgify.yml contains a Link that leads to a chain of redirects.

Hi! I'm unable to find any information regarding how often the electron apps list on the website is updated. Perhaps it would be good to mention this in the contribution documentation and/or the readme?

For instance, I submitted my application "Buttercup" 10 days ago and it hasn't appeared on the website yet, so I was just wondering what the average turn-around time is for updates to be pushed to the website.

Thanks!

See electron/electronjs.org-old#986

When a new app is added, we should check that the URLs are legit.

The test suite could somehow isolate that newly added app (by looking at the latest git commit) and test that its homepage and/or repository URLs are returning 200 status codes.

This test should NOT be run for every app on every test run. That would be slow and probably cause intermittent test failures.

</3

https://twitter.com/zeplin_io/status/842437674606637060

i thought i'd look into this when i saw the update was only 12MB - i was wondering how they pulled it off with electron! as it turns out, the app is entirely native

I feel like we can have a website which has a dedicated way to add apps and details without making a pull request. This would be quick and fast and we can ad much more features like ratings download counter etc. If anyone is interested in this idea I would like to create that site for electron putting my entire heart and sole ❤️ . Waiting for your reply.

🚨 You need to enable Continuous Integration on all branches of this repository. 🚨

To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because it uses your CI build statuses to figure out when to notify you about breaking changes.

Since we didn’t receive a CI status on the greenkeeper/initial branch, it’s possible that you don’t have CI set up yet. We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.

If you have already set up a CI for this repository, you might need to check how it’s configured. Make sure it is set to run on all new branches. If you don’t want it to run on absolutely every branch, you can whitelist branches starting with greenkeeper/.

Once you have installed and configured CI on this repository correctly, you’ll need to re-trigger Greenkeeper’s initial pull request. To do this, please delete the greenkeeper/initial branch in this repository, and then remove and re-add this repository to the Greenkeeper App’s white list on Github. You'll find this list on your repo or organization’s settings page, under Installed GitHub Apps.

The following is failing on the publish step:

 9503 passing (2s)
 1 failing
 1) machine-generated app data (exported by the module) sets a `colors.faintColorOnWhite` semi-transparent rgba value on every app:
    AssertionError: expected 'rgb(82, 168, 255, .25)' to match /rgba\(\d+, \d+, \d+, 0\.1\)/
     at apps.forEach.app (test/machine-data.js:57:40)
     at Array.forEach (<anonymous>)
     at Context.it (test/machine-data.js:56:10)

I have made some updates and had a new release but it does not seem to be updated on https://electronjs.org/apps/sharp-tune

I submitted a pull request, adding my Mac / Windows Electron app Movie Scores: #797

I receive an email that the build has failed with the following messsage:

npm test
> [email protected] test /home/travis/build/electron/apps
> mocha --reporter min test/human-data.js test/colors-spec.js && standard --fix

calculating good colors for white
calculating good colors for white
calculating good colors for black
calculating good colors for white
calculating good colors for black
calculating good colors for white
calculating good colors for black
calculating good colors for white
calculating good colors for black
calculating good colors for black
calculating good colors for white

  12947 passing (6s)
  1 failing

  1) colors should create entries with the expected properties:
     Error: Timeout of 2000ms exceeded. For async tests and hooks, ensure "done()" is called; if returning a Promise, ensure it resolves.

Any ideas?

Thanks.

https://github.com/oguzhaninan/Stacer/releases

Just saw this when updating stacer, so it should probably be removed from the list ;)

I was following the apps as an when they were added, I see that it is now sorted by name. it is difficult to follow new apps among the sea of apps listed here.

Can this be sorted by the date it is added again? or can there be option to sort it by the date or name with month based grouping?

The app Thunder seems to be outdated as it’s unreachable and I couldn’t find further info anywhere.

According to whois.net, the domain trollswebapp.com expired 2 days ago. I couldn’t find the icon or description anywhere else either.

cc @davidsolorzano20 who added it with #214

As @whyboris recently pointed out, the module has not been published in several days. We should set up a heroku -> papertrail -> slack alert to get notified when the release process is broken.

I created my pull request nearly 2 days ago . I can find my app on here but i cant find it on website . Have I done something wrong ?

App name : FridayAI

Seeing this warning on deploys to Heroku:

Warning: You are running on a deprecated stack.
Please upgrade to the latest stack by following the instructions on:
https://devcenter.heroku.com/articles/upgrading-to-the-latest-stack

Steps: https://devcenter.heroku.com/articles/upgrading-to-the-latest-stack#upgrading-an-app

The URL where it redirects to: http://frontendbox.io/
Not sure this is considered as a problem for this repo, but if the issue persists, it might be better to remove the reference.
(Hope it's not a problem with my config. Otherwise sorry for the noise.
(Not sure I should have opened an issue for that...)

Clicking the Tusk app from electron apps homepage leads to a 404

Broken link: https://champloohq.github.io/tusk/

Every once in a blue moon, this app's release script on Heroku fails. Usually it's because GitHub or npm is down. The Electron website has a Heroku release script that saves failures output to a gist and send the url to Slack. Let's borrow that technique and use it here: electron/electronjs.org-old#729

Hey! Awesome MognoDB Team! i thinkg a foun d a littel bug.

If you use the awesome Validation tab on the collection and delete a empty row while the current Validation is not valida because the empty rule, you do not have any way to force the web check.

I didn't check how to fix that, if you team are busy I could found the problem, i know it is a web app, but i'm not sure if you agree a pull request.
If i could participate let me know.

I'm not sure if this is the best place to put eh problem, but i didn't find a better place

Thanks!

Pardon me if i'm just really stupid right now. But i cannot for the love of me figure out how this submission system works. The website says to create a new pull request in this repository. And the instructions says that i need to add a icon and a yml file with all the information about the app. That much is obvious.

But when i try to create a new pull request. I get to the "Compare changes" part and the "Create pull request" button is grayed out unless i select a specific branch or fork. But if i do that. The bot will close it instantly after creation.

I'm still relatively new to using Github. So i'm sure the answer is obvious. But still. I could really use some more help on this issue.

Colol app doesn't seem to be available anymore, I get an "Account suspended" page instead of the website.

I am looking for a cross-platform framework.

Can I develop a hybrid app (electronically) with electron?

How is the desktop app different from a hybrid app (web app)?

The release process is timing out on Heroku because the color palette extraction step is taking too long. Let's solve this by only recalculating things like image sizes and colors when the image file has actually changed. We can probably achieve this by storing some kind of hash of the image and only do expensive operations if the hash is new or has changed.

Just collecting some prior art here, in case we want to introduce a set list of categories.

• https://developer.apple.com/app-store/categories/
• https://support.google.com/googleplay/android-developer/answer/113475?hl=en

When we start making standalone app pages, then links in places like Slack could have a nice preview, assuming we get the meta tags right and everything:

We should support optional homebrewCaskName and chocolateyPackageName (or similarly named) properties in app metadata. This would allow us to display brew cask install foo and choco install foo one-liners (for Mac and Windows, respectively) on the Electron website.

Related: desktop/desktop#2508

...so the website doesn't have to deal with it.

Example:

[
   {
      "count": 4,
      "name": "Books",
      "slug": "books"
    },
    {
      "count": 7,
      "name": "Business",
      "slug": "business"
    },
    {
      "count": 72,
      "name": "Developer Tools",
      "slug": "developer-tools"
    }
]

We can use the already-depended-on slugg to generate the slugs.

To avoid making this a breaking change, we can just keep the default behavior for require('electron-apps') and access the categories using require('electron-apps/categories')

cc @jkleinsc

Hi, just tried this cool wizard process.

I get this error after i fill the license prompt and hit enter:

? What is the name of the app? ndm
? Short description npm desktop manager
? Website (can be repository URL if app has no website) https://720kb.github.io/
ndm
? Repository (optional) https://github.com/720kb/ndm
? Keywords (optional, comma-delimited) npm,desktop,manager,tool,gui,app
? License (optional) GPL-3.0
(node:2274) UnhandledPromiseRejectionWarning: Unhandled promise rejection (rejection id: 1): Error: ENOENT: no such file or directory, open '/Projects/electron-apps/apps/ndm/ndm.yml'

Nothing serious, just wanted to let you know about it.

Sometimes the automated release script fails with an error like tag 'v1.4680.0' already exists:

Sep 12 09:19:18 github-electron-apps app/scheduler.1299:  + git config user.email [email protected] 
Sep 12 09:19:18 github-electron-apps app/scheduler.1299:  + git config user.name 'Electron Bot' 
Sep 12 09:19:18 github-electron-apps app/scheduler.1299:  + git add . 
Sep 12 09:19:18 github-electron-apps app/scheduler.1299:  + git commit -am 'update apps' --author 'Electron Bot <[email protected]>' 
Sep 12 09:19:19 github-electron-apps app/scheduler.1299:  [master e08a3ce] update apps 
Sep 12 09:19:19 github-electron-apps app/scheduler.1299:  v1.4680.0 
Sep 12 09:19:19 github-electron-apps app/scheduler.1299:  npm ERR! code 128 
Sep 12 09:19:19 github-electron-apps app/scheduler.1299:  npm ERR! Command failed: git tag v1.4680.0 -am bump minor to 1.4680.0 
Sep 12 09:19:19 github-electron-apps app/scheduler.1299:  npm ERR! fatal: tag 'v1.4680.0' already exists 
Sep 12 09:19:19 github-electron-apps app/scheduler.1299:  npm ERR!  
Sep 12 09:19:19 github-electron-apps app/scheduler.1299:  npm ERR! A complete log of this run can be found in: 
Sep 12 09:19:19 github-electron-apps app/scheduler.1299:  npm ERR!     /app/.npm/_logs/2018-09-12T16_19_18_980Z-debug.log 
Sep 12 09:19:19 github-electron-apps app/scheduler.1299:  npm ERR! code ELIFECYCLE 
Sep 12 09:19:19 github-electron-apps app/scheduler.1299:  npm ERR! errno 1 
Sep 12 09:19:19 github-electron-apps app/scheduler.1299:  npm ERR! [email protected] release: `script/release.sh` 
Sep 12 09:19:19 github-electron-apps app/scheduler.1299:  npm ERR! Exit status 1

This is caused when the previous run of the release script successfully created a tag but didn't manage to git push the code with the included package.json bump.

To work around this occasional hiccup, we should catch this error and manually bump the package.json version first so the script can continue.

We could do a HEAD request to all image URL's to ensure the mimeType returned is actually an image.

This would prevent things like #430 where the URL added didn't actually point to an image 👍

Existing tests: https://github.com/electron/electron-apps/blob/master/test/human-data.js#L100

Folks don't usually notice that CI has failed, so I end up clicking into Travis, copying the error, and pasting it back as a comment on the issue so the user can fix it.

https://github.com/electron/electron-probot doesn't do anything yet, but this would be a good use for it.

My name is Radu Dan, I am a pro graphic designer and a contribuitor in Utopian community. I saw your logo and I want to know if you want a new proposal for your logo. If you will like it and if you will use it, you will have a new logo, and I will be able to make my Utopian account stronger.Regards!

Hello,

I have done this pull request
#785

But as you can see I receive a message that buit is faling because something related to "color", I have no idea what is speaking about, I am a novel developer and I am somewhat confused even managing git, but I have no put any "color" in my YML file. What can I do? Someone can solve this?