creality3dprinting / cr-10 Goto Github PK

I have a CR10-V2. The X-Carriage and Hotend-Assembly does not match the data provided here. I have furthermore added a BL-Touch to that setup. I'd like to have the 3D-Data to design additional attachments for the X-Carriage.

Can you please upload that data?

Hi, here is an erratum for the file:
400306234-aviation connector-8-Model.pdf

The PDF states:

1. 1#2# Heater
2. 3#4# Nozzle thermistor
3. 5#nozzle fan (rad), 6#nozzle fan (black)
4. 7#cold section fan(rad); 8#cold section fan(blac).

This is incorrect - the fans are swapped around. My source: I own 15 CR10 variants from original to 10s to 10S5, all are the same, and do not match this document.

Here is a suggested correction including spelling and more commonly heard English terminology for the parts:

1. 1#2# Heater
2. 3#4# Nozzle thermistor
3. 5# Heat-sink fan (red); 6# Heat-sink fan (black)
4. 7# Part cooling fan (red); 8# Part cooling fan (black)

Kind regards,
Alex Gibson
Edumaker Limited

I saw a post that made it sound like at one time the models for the board, power supply and display were available.

Hi, Are there plans and files for the CR-10 MAX model as well?

Circuit diagram/Motherboard/CR-10 Schematic.pdf

In the Power section, I only see a value for the integrated circuit, an inductor, and the fuse. No values are given for the other components. Also the inductor is not numbered. It is still labeled "L?".

Thanks for making these files available! Great work!

Any chance we can get CR-20 / CR-20 Pro 3D Assembly and PCB schematic files? It seems it is almost identical to the Ender 3, with the exception of the bottom frame housing and mainboard parts.

Thank you for making all this available!
I just found out about it, this would probably have stopped me from doing my own version.

But the provided CR-10 Schematic.pdf does not match CR-10 Motherboard.PCB.
The part names are all wrong, the controller is named U5 in your schematic but named U8 on the board.
I have not found a single part yet that has the same name in your CR-10 Schematic.pdf as in your CR-10 Motherboard.PCB.
Also the values for the components do not match and some values are even missing.
And some of the signal names to do not match as well.

Please do provide a schematic that matches the board file.
And please do consider providing the schematic in binary form as well as placement plan in .pdf for the board.