creality3dprinting / cr-10 Goto Github PK

Thank you for making all this available!
I just found out about it, this would probably have stopped me from doing my own version.

But the provided CR-10 Schematic.pdf does not match CR-10 Motherboard.PCB.
The part names are all wrong, the controller is named U5 in your schematic but named U8 on the board.
I have not found a single part yet that has the same name in your CR-10 Schematic.pdf as in your CR-10 Motherboard.PCB.
Also the values for the components do not match and some values are even missing.
And some of the signal names to do not match as well.

Please do provide a schematic that matches the board file.
And please do consider providing the schematic in binary form as well as placement plan in .pdf for the board.

I have a CR10-V2. The X-Carriage and Hotend-Assembly does not match the data provided here. I have furthermore added a BL-Touch to that setup. I'd like to have the 3D-Data to design additional attachments for the X-Carriage.

Can you please upload that data?

Circuit diagram/Motherboard/CR-10 Schematic.pdf

In the Power section, I only see a value for the integrated circuit, an inductor, and the fuse. No values are given for the other components. Also the inductor is not numbered. It is still labeled "L?".

I saw a post that made it sound like at one time the models for the board, power supply and display were available.

Hi, Are there plans and files for the CR-10 MAX model as well?

Hi, here is an erratum for the file:
400306234-aviation connector-8-Model.pdf

The PDF states:

1. 1#2# Heater
2. 3#4# Nozzle thermistor
3. 5#nozzle fan (rad), 6#nozzle fan (black)
4. 7#cold section fan(rad); 8#cold section fan(blac).

This is incorrect - the fans are swapped around. My source: I own 15 CR10 variants from original to 10s to 10S5, all are the same, and do not match this document.

Here is a suggested correction including spelling and more commonly heard English terminology for the parts:

1. 1#2# Heater
2. 3#4# Nozzle thermistor
3. 5# Heat-sink fan (red); 6# Heat-sink fan (black)
4. 7# Part cooling fan (red); 8# Part cooling fan (black)

Kind regards,
Alex Gibson
Edumaker Limited

Thanks for making these files available! Great work!

Any chance we can get CR-20 / CR-20 Pro 3D Assembly and PCB schematic files? It seems it is almost identical to the Ender 3, with the exception of the bottom frame housing and mainboard parts.