Is this board right for me? about ch32v003fun HOT 5 OPEN

seems pretty straightforward, really any microcontroller ought to handle that.

Jumping straight into ch32v as a complete newb might be a bit of a steep learning curve though. Depending on your background.

take a look at the example GPIO code in this repo as a starting point

from ch32v003fun.

I'm creating a PCB for an upcoming event so I need to know if it works before my deadline. I've ordered all the necessary parts from AliExpress but their shipping takes at least 2 - 5 weeks and ordering the PCB takes a week. Would someone be able to confirm this would work with the flasher and code?

From AliExpress, I've ordered the WCH-LinkE Mini and a few ESP32s. But I'm now planning on integrating a USB-C port right into the PCB to flash the CH32V003J4M6 module using this guide. I've also been hoping I can just use the regular Arduino IDE and write code similarly to other Arduino projects, I'm planning on using this for that.

Photos below are of my new design

from ch32v003fun.

This looks weeeird.

Also, I've not used the SOIC-8 version with USB so I just don't know.

Regardless, it's going to be very hard to get everything right on the first go.

from ch32v003fun.

I fixed that right after I sent the message. Well thanks though

from ch32v003fun.

Honestly just using some 555 latches or any other "analog" approach might be way easier here. Especially if this is a one time project you need to get it up running quickly.

from ch32v003fun.