cagnulein / qzcompanionnordictracktreadmill Goto Github PK
View Code? Open in Web Editor NEWCompanion App of QZ for Nordictrack Treadmills and Bikes
Home Page: https://www.qzfitness.com/
License: GNU Affero General Public License v3.0
Companion App of QZ for Nordictrack Treadmills and Bikes
Home Page: https://www.qzfitness.com/
License: GNU Affero General Public License v3.0
Hey there,
I installed the QZ Companion 3.2.31 via your instructions via ADB script which worked well.
data does come into the QZ app instantly and I can connect to zwift.
The one thing I can't seemed to figure out is how to enable th speed control / incline control over the app (and eventually zwift).
Is there further instructions which settings to enable in the app?
Happy to provide logs or anything you require to help with this
Please merge if there is an existing thread, was have talked about this before but lost track.
I have T8.5s
At the moment, with the X11i profile selected within the companion and this gives inputs to iFit, just not the correct movement.
The X coordinate is accurate but Y is not.
I'm not sure how to give you the correct movements for Y but happy to help.
Inline is from 0% to 12% in .5 increments.
Speed is from 1.0kph to 22.0kph in 0.1 kph increments.
It may be the controls are the same size, it just needs the size of the movement adjusted.
Appreciate your help with this.
Hello
I have been trying for a while to have my new trendmill working with zwift
I have done all the instruction but it seems the link between the trendmill and my ipad running qdominozwift get lost even if my wifi connexion is fine.
I am on last version of the companion
What i noticed
Qz on ios can t control the trendmill, meaning by extension zwift can t control the trendmill
After the install, all debug stuff are lost on reboot
After install, the qzcompanion is set on "other" and i can t have data on qz on my ipad
I have to log back and set it to nordtrack 2950.
Thanks by advance for all the tips you can provide to help me
I just followed the guideline to setup my nordictrack s22i to work with QZ app.
I installed successfully the qz companion on my nordictrack and select s22i as device and then restarted.
Then I configured the QZ app as showed by the documentation.
QZ is not retrieving data from the bike and all the tiles are 0.
I attach the qz debug file.
debug-Sat_May_27_17_38_51_2023.log
Had it installed and communicating, but for some reason now the android app wont connect to the treadmill anymore. I pushed the latest QZ via adb just now to see if I needed to reinstall the newest version and it still wont connect to it. I double checked the IP address as well. I set it up as the nordictrack 2950 in settings and it worked fine before. I thought I had iFit updates disabled, but maybe they got around it and did something? I also have the taskbar app installed to get around the home screen lockout.
Hi @victorypoint
i just discovered and tested this https://github.com/wsvn53/adb-mobile
Along with the actual adb remote implementation that I did in the companion, we should be able to add to the QZ app (not the companion, I mean the QZ app directly) the ability to read the log and write the swipe from the QZ app itself.
What do you think? It could help the users not so tech savvy?
Hi,
Installation fails with ADB script (connection refused) with USB debug mode at on.
It is also impossible to install the APK directly by downloading it from the tablet browser integrated into the treadmill.
The tablet is in Android Lollipop version in my treadmill Norditrack T12.0
Any idea ?
In dadvance, thanks a lot for your help.
Hi,
I am not sure how to get the t6.5si to have the speed and incline control to be consistent from QZ. I have qz companion installed and it reports back the speed and incline to QZ, but I cannot get the treadmill to change speed/incline consistently from QZ. I'm not sure which treadmill to select from QZ companion, I've tried the t8.5s but I think the t6.5si does not have the same range for the speed and incline (0-10mph for speed and 0-10% for incline) so you might need to get coordinates for the tablet screen and have a specific one for the nordictrack T6.5si?
Hi,I was able to get the coordinates. These are as accurate is I could get. If there is an easier way to do this via a log/dump etc let me know. Speed Lowest viable on slider is 1 & highest is 19Tap increments by button increase it by .1 & actual highest is 19.3X is 1195 & y changes as I slide it up1 y is 5983 is 631.2 19 is 255.618 is 289.16 is 318.614 348.613 is 378.511 is 402Inc line how’s from -3 to 12Default is 0Y is 79.3-3 is 595.2-2 562.20 is 522.21 is 489.32 is 465.34 is 439.511 is 289.612 is 252.5
originally posted here fb4ff40#commitcomment-91666555
Occasionally seeing these errors:
01-23 14:32:42.957 1397 9077 I QZ:UDPListenerService: Waiting for UDP broadcast
01-23 14:32:42.998 1397 8316 I QZ:UDPListenerService: Got UDP broadcast from 192.168.1.253, message: -1;-100
01-23 14:32:42.998 1397 8316 I QZ:UDPListenerService: -1;-100
01-23 14:32:42.998 1397 8316 I QZ:UDPListenerService: requestSpeed: -1.0 0.8
01-23 14:32:42.998 1397 8316 I QZ:UDPListenerService: requestInclination: -100.0 0.5
01-23 14:32:42.999 1397 9077 I QZ:UDPListenerService: no longer listening for UDP broadcasts cause of error Socket closed
01-23 14:32:43.000 1397 8316 I QZ:UDPListenerService: Waiting for UDP broadcast
and
01-23 14:32:43.616 1397 8316 I QZ:UDPListenerService: Waiting for UDP broadcast
01-23 14:32:43.621 1397 8316 I QZ:UDPListenerService: Got UDP broadcast from 192.168.1.253, message: -1;-100
01-23 14:32:43.621 1397 8316 I QZ:UDPListenerService: -1;-100
01-23 14:32:43.621 1397 8316 I QZ:UDPListenerService: requestSpeed: -1.0 0.8
01-23 14:32:43.621 1397 8316 I QZ:UDPListenerService: requestInclination: -100.0 0.5
01-23 14:32:43.624 1397 8316 I QZ:UDPListenerService: no longer listening for UDP broadcasts cause of error bind failed: EADDRINUSE (Address already in use)
01-23 14:32:52.908 1397 1397 I QZ:UDPListenerService: Service started
01-23 14:32:52.910 1397 9446 I QZ:UDPListenerService: Waiting for UDP broadcast
The first error doesn't seem to cause any interruption in the UDPListernerService, but the second one missed ~9 seconds of input. Obviously this could cause errors in a custom workout.
Running QZ on a Mac and QZCompanion on a NordicTrack EXP7i.
Any thoughts on this and how to keep it from interfering with workouts?
Thanks!
Hello,
i´m using an S10i Nordictrack bike. So far I could not find any feedback regarding the compatibly of the bike with this app.
I was able to install the app on the bike (not via adb, but via direct download).
Also the app is installed successfully. But after installing the bike does not connect to the wifi anymore. Even though wifi connection is available and has a very good signal. Before the installation the bike was able to connect to the wifi.
Any ideas, what's going wrong or what I could have done wrong? ;)
Many thanks in advance!
Regards,
Mexx
Hello
I am having problems getting data from the treadmill to the Android app - all the tiles are showing 0.0.
I can ping the treadmill from the phone.
Attached are the debug logs. I had a look through them and it seems the treadmill is logging the data just fine, so I suspect the issue is on the phone side. I had a look at the logs from my phone and I am not seeing anything obviously wrong.
It seems the timestamps are out by an hour between the treadmill and the phone for some reason.
debug-Mon_Jun_12_09_55_54_2023.log
FitPro_12Jun2023.txt
Many thanks in advance.
Super excited to try this out, but cannot get the connection to work between QZ-companion and QZ app.
First Attempt: Manual App Install
Don't own a PC, so started with the manual install route. I was able to install the QZ-Companion app successfully according to the instructions. Though, I will note that privileged mode didn't not stick, and I had to re-enable it throughout the process after reboots.
I opened the QZ App on iOS, and complete the settings per the instructions, but it would never connect to the treadmill. It seemed to connect to everything except for the treadmill (AppleTVs in 2 different rooms, Apple Watch, and a couple other devices). I didn't see any way to get a list of devices or tell it to stick with only one. I killed the app, and each time it launched, it would pick a device, or get stuck on connecting, but it never connected to the treadmill. (I confirmed I could successfully ping the treadmill IP from my iMac.)
Second Attempt: Install via PC
Then, I remembered that I happen to have a PC laptop sitting around (not mine) and decided to try it. First, I uninstalled QZ-Companion from the treadmill. Then, I downloaded the install package, extracted it, and ran the QZ-Companion.bat file, as specified. It pinged the treadmill successfully, but it failed on ADB connection.
The log says:
Connecting to treadmill via ADB ...
disconnected everything
* daemon not running; starting now at tcp:5037
* daemon started successfully
cannot connect to XXX.XXX.X.XXX:5555: No connection could be made because the target machine actively refused it. (10061)
I wondered if it might be a firewall problem, but I would assume, if that were a common problem, it would be mentioned here. I didn't do anything special with port restrictions on my router, but not sure what else it could be.
Any thoughts on what I should try next?
Details about my setup:
NordicTrack C1750 Treadmill (2017 or 2018)
iPhone
One final note, I found issue #1373, which seems to be the same problem I'm having. The intent of using the Peloton app is even the same, so I'm encouraged that we'll be able to figure this out. Looking forward to any suggestions you have.
Thanks in advance!
Chad
Update
I re-installed the QZ-Companion app on the iFit tablet, and there is progress, but still not working correctly:
Any advice on a file viewer for Android 5.1.1 from a known trustable source? 🤔
Robert, here are the logs from the bike after I was seeing the companion app failure messages.
2023-01-04_logs.txt
2023-01-03_logs.txt
2023-1-4___0-42_23.txt
2023-1-4___0-30_59.txt
I managed to enter privileged mode forever. I installed the app from the web. The app on the android just allows me to barely select the model. Is that okay behavior?
In the QZ companion app I select Other as I don't see my version on the list. After setting all the options in the QZ Fitness app, it still says "Connecting" after multiple restarts. When I start the treadmill the numbers in the app don't change.
Hi Robert.
I have a iFit enabled Profrom treadmill, model Premier 1300. I enabled the USB debugging and attempted to install companion over ADB but received a refusal code. I will attach the log. I also attempted to install directly from the treadmill tablet (using wifi) but received "there was a problem parsing the package".
Please let me know if you have any ideas.
Thanks from Seattle, Washington.
Dave
QZ-Companion-log.txt
Hi - I installed on a 2450 Commercial. Data flows fine, but incline from QZ doesnt work (up and down buttons for incline and speed do not control the treadmill at all). Let me know how I can help enable it on this treadmill.
Also an aside - I was using an ipad as both the QZ device and for Zwift. It disconnected after 5 seconds from Zwift consistently. When I put the QZ app on an iphone and connected Zwift on the ipad to it it worked flawlessly.
First thanks for making your app available openly and freely! May I ask which license it falls under? I couldn't find any details in the repo here. If you didn't decide yet, I suggest checking with SPDX for a fitting one approved by OSI/FSF.
Have turned on USB Debug but ADP did not work on wifi (with IP address) or via USB to USB connection.
In USB/USB connection the device is not being recognized but ADP is working.
I Tried to a reset of android screen but no pinhole for resetting. The only option is to clear memory and data, then log in again.
I am struggling to get all the Zwift connections to work. It seems to work intermittently but it is anyone's guess if it will work when I switch on.
After multiple restarts of the bike, app, Zwift and even laptop, I could not get it working today.
Power and cadence connects easily but controllable does not, and if it is not connected then the other two do not get the data from the app.
Can you please help with what I can do to troubleshoot?
What happened to your signing key, @cagnulein? My updater just rejected your latest APK:
"org.cagnulein.qzcompanionnordictracktreadmill_84.apk" is signed by a key that is not allowed:
cf44dcb5ef1e1231bddd4194a4b8b245d1aec5cb217affba0414cb1ea5bf326d
Looks like you switched to a (different) debug key. Unfortunately you also forgot to increase versionCode
, so the wrongly signed APK replaced the correct one, in effect making your app invisible in my repo as if it would not be listed.
For details on the certificate check, please see How to keep your key safe and what measures to take for the event of loss?
I have replaced my laptop with an Apple Tv to use for Zwift.
Zwift now connects to QZ quickly but no data comes through on Zwift even though qz does get data from the companion
I'm all set up with my 2950 but unsure on how I can have Zwift control these items?
Hi - I have a Commercial 2950 (2021 model) I think the same as yours but get the following error on my Windows PC after the ADB connection is established.
**adb: failed to install QZCompanionNordictrackTreadmill.apk: Failure [INSTALL_FAILED_OLDER_SDK: Failed parse during installPackageLI: /data/app/vmdl1859436300.tmp/base.apk (at Binary XML file line #7): Requires newer sdk version #28 (current version is #25)]
Performing Streamed Install
Waiting for 0 seconds, press a key to continue ...
Launching QZ Companion ...
Waiting for 0 seconds, press a key to continue ...
Launching iFit ...
Waiting for 0 seconds, press a key to continue ...
QZ Companion is installed. Press any key to reboot treadmill . . .**
QZ Companion isn't actually installed because it failed as in the first line. Is there a workaround?
Also in QZ (Android running on my phone) Under Settings > Treadmill Options > Proform/Nordictrack Options>
the only thing listed is 'Nordictrack 10'
There is seemingly no way to follow your instructions -
'Expand Treadmill Options, Proform/NordicTrack Options, and enter the treadmills IP address under NordicTrack 2950 IP and hit OK. Exit and relaunch QZ to activate the change. If done correctly, QZ will display live data tiles to indicate it is communicating directly with QZ Companion on the treadmill.'
I guess this may be because QZ Companion is not running?
Additionally, there is no 'Enable Virtual Device' setting under Experimental Features' so I can't follow the following instructions either -
'Next in QZ, expand Experimental Features and turn on Enable Virtual Device, Virtual Device Bluetooth, and Wahoo Direct Connect. Exit and relaunch QZ again to activate the changes. Wahoo direct connect will now transmit the treadmills speed and incline data to Zwift via Bluetooth.'
Hi I'm trying to get this working on a T7.5s
The install went smoothly but no data is coming through.
I've attached the logs from the adb-debug.bat
Thanks
Hi there, I purchase the app with the hopes of installing on my nordictrack s15i bike. I’ve done all the steps to install it on the bike, but am not so clear as to where to place the IP address in the app as it’s built for the treadmill and I don’t see a spot for the bike.
Please add support for Nordictrack X9i Treadmill, and if possible, iFit. Thanks
How do you download on your PC? I cant figure how to download and open. Can you please advise a step by step.
I’ve installed as per the instructions on a Nordictrack S22i but the wattage on QZ app is not the same as the iFit app on the trainer. Is there some calibration I’m missing?
Not really an issue but not sure where else to put this.
It would be really great if in addition to GPX files we could upload a csv or something to make our own workouts. eg:
Time | Incline | Speed (mph)
2:00 | 3 | 5
0:45 | 10 | 8
0:30 | 8 | 5
0:45 | 10 | 8
2:00 | 2 | 5
This would then just be a playbook for a workout that we can design ourselves.
I have successfully installed QZ companion on my Nordic Track EXP 10i, and configurated it according to the readme guide.
Some issues:
When running the ifit in manual, and changing speed or incline, the companion are not able to show the figures as long as it only while number (1,0 , 2,0 , 3,0 etc.). When altering adjustmens with decimals QZ companion are not able to read and the dashboard numbers zeroes out. Anyone know what the issue could be? I have configured the QZ companion to deal with 0,1 steps on speed and 0,5 steps on inclination.
When running Zwift, it equally read any adjustment expect whole figures as zero, and when choosing f.ex 10,1 speed, the runner just stops running
I just installed QZ on my Pro-Form Pro 2000 today. I was able to install it using ADB and side load the app. I then installed the app on my iPad and entered the IP address under Settings-Treadmill Options-Proform/Norditrack Options-Proform IP. Unfortunately after closing and reopening the app and just says connecting and the values on the grids never change. Any ideas how to get it working?
Hi Roberto, great app, working now on Nordictrack 2950 👍 but I can't see where to enable Zwift to control the treadmill incline, or find instructions online - sorry! Any help would be very much appreciated.
Thanks
Tris
Hi there,
I followed your instructions below and installed the QZ companion app on my S15i bike after doing a factory reset. the install was successful.
However the app on my android phone does not connect to the bike - it does not pick up any Bluetooth devices even though I can see many Bluetooth devices in the normal Android interface.
I also tried to do the manual connection under advanced but the only option listed there is "wifi" - which is not one of mine
The companion app on the bike is set to "other"
Can you help please?
I set the QZ app on my S15i cycle to S22i (the default was other).
Zwift picked up Power Source, Cadence, and Controllable in connections.
During the manual workout, the S15i screen jumps between "pause" - like it is not picking up the rpm- and the normal workout screen - where it does pick up the rpm.
I suspect that it is because Zwift is trying to adjust the rpm on the bike (because 'controllable' was picked up in connections) - is that right?
Why would this be happening?
Adb logcat output after apk install and launch:
Hi,
I am really new to this and hopefully I am doing this right. But I've installed the companion app on the nordictrack S27i and went through the steps to enter in the IP but I am not seeing anything show on the QZ fitness app. Is this just not compatible with the S27i yet?
Thank you for any help you can provide.
Hello,
I am using this on: Proform Power T7L. It is not listed in available devices on either the Companion app - which I already installed - or the ios QZ App.
I used the latest rev from this repot.
I have tried a few different device selections from both sides - i.e. 'Other' from QZ-Companion (on the proform) and each of the available Proform selections in the QZ IOS app.
For this testing I had the IP address entered into the 'Proform IP' in the QZ IOS App.
Is this Proform device not supported by the current revision of QZ and QZ-Companion?
This may be an unreasonable amount of work for a very slim userbase, so I totally understand if it's not worth it.
I just picked up a NordicTrack VR25 Recumbent Bike. It has an Android tablet built in with access to iFit, so I had hope that QZ would connect. However, when I dug into the software, it was not like any of the screenshots of iFit I had previously seen. Turns out accessing privileged mode was impossible... but also unnecessary, since a simple gesture on the settings screen will dump you to the android home screen. Yay!
Unfortunately, from there, things get disappointing. As mentioned, the underlying Android firmware is 2.2 (significantly more ancient than I expected -- I thought this device was released in 2018, but I probably got that wrong). On top of that, it looks like a pretty stripped down build, and while I can access Settings, Spare Parts, and Dev Tools, I can't actually find a way to enable ADB.
But no matter. I served up the QZ Companion APK via a local http server (the browser is so old that it can basically load no websites that use SSL, i.e. GitHub). But after downloading, I just get "Parse error: There is a problem parsing the package." I assume this means that the apk isn't built for the 2.2 target, but that's about as far as my understanding goes.
I don't know if IFit on this generation of machine even uses any of the same protocols. Is it possible to backport to this Android version? Has anyone else encountered these issues?
Let me know if there's anything I can do to make this easier to investigate. Thanks!
Hi, I am unable to get QZ companion to work. I have tried on both Android phone and iPad with slightly different behavior.
On Android I get an initial connection but immediately it stops working. If I kill the app and restart I can get a new connection but again it will immediately die. So I can see the speed/incline at the moment I open the app but that is where it stays until I kill/reopen.
On iPad the connection remains open and I can see speed/incline changes. But I cannot make and changes from the app. From Zwift it finds their "wahoo" device and connects. But no speed/incline data is transmitted. When I start an activity in the top left it shows "Connection Failure"
From the Treadmill tablet I have tried X11i, X32i, 2950, and Other.
From the Android app I have tried various different settings.
I have verified that the app is running on the treadmill
I have not been able to find the log dump on Android or iOs. Please direct me where it saves and I can upload it.
When I attempt the log dump on the treadmill the app freezes.
Thank you!
Hi,
I would like to request the ability of QZ sending the HR data to IFIT app.
Thanks in advance
I have installed the companion app successfully and I purchased the iOS version of qdomyos-zwift which connects and can read data nicely via wifi. I did test the companion in X11i, 2950, and other modes but I am unable to adjust speed and incline from the iOS app. I mean it does adjust something (there are clicks on the screen because it makes a sound and changes to fullscreen) but apparently, the coordinates are all wrong for the bigger screen.
Which information would be needed and how could I get it for you to be able to make the necessary changes?
Model is X32i ETNT39221-INT.0 and I am in EU with metric system, iFit app version is 2.6.81.4158, Admin version is 2.0.5.1213
Thank you for the great work
This is a request to add auto resistance for the Nordictrack S15i bike please
Thanks
I have tried a couple of times getting this to work , bit still no success . I'm pretty sure i have followed the guide correctly, but om not able to see speed / incline in the companion app.
Today I did a full reset of the mill and installed the app via browser, rebooted, started manual workout and then started app.
Are you able to have a look? Where can I send the log-file?
Thanks in advance!
I have followed the setup guide and installed the companion successfully, configured QZ on an iPad with the IP and see the tiles.
However, when starting a manual treadmill session the values do not change within QZ.
So close!
09-04 21:40:56.332 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:40:57.328 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 95 Device: Polar H10 86A67320
09-04 21:40:57.332 1196 1207 V mono-stdout: [64] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (95). Too many values
09-04 21:40:59.324 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:40:59.334 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 98 Device: Polar H10 86A67320
09-04 21:40:59.337 1196 1207 V mono-stdout: [64] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (98). Too many values
09-04 21:41:00.320 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 98 Device: Polar H10 86A67320
09-04 21:41:00.323 1196 1207 V mono-stdout: [64] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (98). Too many values
09-04 21:41:01.319 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 99 Device: Polar H10 86A67320
09-04 21:41:02.314 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 99 Device: Polar H10 86A67320
09-04 21:41:03.315 1196 1257 V mono-stdout: [65] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 99 Device: Polar H10 86A67320
09-04 21:41:04.309 1196 1257 V mono-stdout: [65] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 98 Device: Polar H10 86A67320
09-04 21:41:05.311 1196 1257 V mono-stdout: [65] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:41:06.303 1196 1257 V mono-stdout: [65] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:41:07.303 1196 1257 V mono-stdout: [65] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:41:08.298 1196 1257 V mono-stdout: [65] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 98 Device: Polar H10 86A67320
09-04 21:41:09.301 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 98 Device: Polar H10 86A67320
09-04 21:41:10.294 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:41:11.294 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:41:11.297 1196 5395 V mono-stdout: [70] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (96). Too many values
09-04 21:41:12.291 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:41:13.286 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:41:14.286 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:41:15.283 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:41:16.280 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:41:17.279 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 95 Device: Polar H10 86A67320
09-04 21:41:19.276 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 95 Device: Polar H10 86A67320
09-04 21:41:19.287 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 95 Device: Polar H10 86A67320
09-04 21:41:20.272 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 95 Device: Polar H10 86A67320
09-04 21:41:21.269 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:41:22.276 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:41:23.264 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:41:24.259 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:41:25.258 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:41:26.254 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:41:27.255 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:41:27.259 1196 8411 V mono-stdout: [69] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (94). Too many values
09-04 21:41:28.251 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:41:29.249 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:41:30.247 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:41:31.242 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 95 Device: Polar H10 86A67320
09-04 21:41:32.248 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:41:32.252 1196 8411 V mono-stdout: [69] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (96). Too many values
09-04 21:41:33.238 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 98 Device: Polar H10 86A67320
09-04 21:41:34.241 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 99 Device: Polar H10 86A67320
09-04 21:41:35.234 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 99 Device: Polar H10 86A67320
09-04 21:41:36.233 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 99 Device: Polar H10 86A67320
09-04 21:41:37.232 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:41:39.223 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 95 Device: Polar H10 86A67320
09-04 21:41:39.236 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 95 Device: Polar H10 86A67320
09-04 21:41:40.225 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 95 Device: Polar H10 86A67320
09-04 21:41:41.868 1196 7146 V mono-stdout: [71] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:41:42.225 1196 7146 V mono-stdout: [71] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:41:42.230 1196 7146 V mono-stdout: [71] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (97). Too many values
09-04 21:41:43.214 1196 7146 V mono-stdout: [71] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:41:44.211 1196 7146 V mono-stdout: [71] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:41:45.209 1196 7146 V mono-stdout: [71] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:41:47.204 1196 7146 V mono-stdout: [71] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:41:47.213 1196 7146 V mono-stdout: [71] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:41:47.215 1196 7146 V mono-stdout: [71] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (93). Too many values
09-04 21:41:48.213 1196 3392 V mono-stdout: [68] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 92 Device: Polar H10 86A67320
09-04 21:41:49.198 1196 3392 V mono-stdout: [68] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 92 Device: Polar H10 86A67320
09-04 21:41:50.196 1196 3392 V mono-stdout: [68] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:41:51.198 1196 3392 V mono-stdout: [68] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:41:52.193 1196 3392 V mono-stdout: [68] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:41:53.189 1196 3392 V mono-stdout: [68] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 95 Device: Polar H10 86A67320
09-04 21:41:53.193 1196 3392 V mono-stdout: [68] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (95). Too many values
09-04 21:41:54.189 1196 3392 V mono-stdout: [68] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 95 Device: Polar H10 86A67320
09-04 21:41:55.687 1196 3392 V mono-stdout: [68] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:41:56.689 1196 3392 V mono-stdout: [68] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:41:57.682 1196 3392 V mono-stdout: [68] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 92 Device: Polar H10 86A67320
09-04 21:41:58.677 1196 3392 V mono-stdout: [68] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 92 Device: Polar H10 86A67320
09-04 21:41:59.678 1196 3392 V mono-stdout: [68] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 91 Device: Polar H10 86A67320
09-04 21:42:00.673 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 92 Device: Polar H10 86A67320
09-04 21:42:00.678 1196 5395 V mono-stdout: [70] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (92). Too many values
09-04 21:42:01.671 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 92 Device: Polar H10 86A67320
09-04 21:42:02.668 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:02.674 1196 5395 V mono-stdout: [70] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (93). Too many values
09-04 21:42:03.665 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:04.665 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 92 Device: Polar H10 86A67320
09-04 21:42:04.669 1196 5395 V mono-stdout: [70] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (92). Too many values
09-04 21:42:05.660 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 92 Device: Polar H10 86A67320
09-04 21:42:06.711 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 91 Device: Polar H10 86A67320
09-04 21:42:07.657 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 91 Device: Polar H10 86A67320
09-04 21:42:08.655 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 91 Device: Polar H10 86A67320
09-04 21:42:09.652 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 91 Device: Polar H10 86A67320
09-04 21:42:10.648 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 91 Device: Polar H10 86A67320
09-04 21:42:11.667 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:12.644 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:13.640 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:42:14.648 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:42:15.636 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:16.633 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:17.631 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:18.630 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:19.646 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:20.624 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:21.625 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:22.623 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:23.616 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:24.622 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:25.614 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:26.654 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 93 Device: Polar H10 86A67320
09-04 21:42:28.604 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:42:28.613 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 95 Device: Polar H10 86A67320
09-04 21:42:28.616 1196 5395 V mono-stdout: [70] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (95). Too many values
09-04 21:42:29.603 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 98 Device: Polar H10 86A67320
09-04 21:42:29.606 1196 5395 V mono-stdout: [70] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (98). Too many values
09-04 21:42:30.598 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 99 Device: Polar H10 86A67320
09-04 21:42:31.595 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 99 Device: Polar H10 86A67320
09-04 21:42:32.595 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:42:33.590 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:42:33.592 1196 1208 V mono-stdout: [67] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (96). Too many values
09-04 21:42:34.589 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:42:35.586 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:42:36.583 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:42:37.583 1196 1208 V mono-stdout: [67] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 94 Device: Polar H10 86A67320
09-04 21:42:38.581 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 95 Device: Polar H10 86A67320
09-04 21:42:40.074 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 95 Device: Polar H10 86A67320
09-04 21:42:40.574 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:42:41.571 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:42:42.569 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:42:43.565 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:42:44.563 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:42:45.590 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 98 Device: Polar H10 86A67320
09-04 21:42:46.559 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 99 Device: Polar H10 86A67320
09-04 21:42:46.561 1196 8411 V mono-stdout: [69] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (99). Too many values
09-04 21:42:47.557 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 100 Device: Polar H10 86A67320
09-04 21:42:48.554 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 101 Device: Polar H10 86A67320
09-04 21:42:48.556 1196 8411 V mono-stdout: [69] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (101). Too many values
09-04 21:42:49.551 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 101 Device: Polar H10 86A67320
09-04 21:42:50.551 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 100 Device: Polar H10 86A67320
09-04 21:42:51.548 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 99 Device: Polar H10 86A67320
09-04 21:42:51.551 1196 8411 V mono-stdout: [69] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (99). Too many values
09-04 21:42:52.545 1196 8411 V mono-stdout: [69] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:42:53.544 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:42:55.037 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:42:55.537 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:42:56.536 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:42:57.536 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:42:58.529 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 98 Device: Polar H10 86A67320
09-04 21:42:59.528 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 98 Device: Polar H10 86A67320
09-04 21:43:00.524 1196 5395 V mono-stdout: [70] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:43:01.523 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:43:02.519 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:43:03.519 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:43:04.515 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:43:05.512 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:43:06.510 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 99 Device: Polar H10 86A67320
09-04 21:43:08.006 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 99 Device: Polar H10 86A67320
09-04 21:43:08.506 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 99 Device: Polar H10 86A67320
09-04 21:43:09.506 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 98 Device: Polar H10 86A67320
09-04 21:43:10.500 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
09-04 21:43:10.502 1196 1207 V mono-stdout: [64] [Trace:HeartRateHelper] Ignoring attempt to set Pulse value (97). Too many values
09-04 21:43:11.498 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:43:12.495 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:43:13.493 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 96 Device: Polar H10 86A67320
09-04 21:43:14.498 1196 1207 V mono-stdout: [64] [Trace:HeartRateConnection] HeartRateConnection.HeartRateDataUpdate heart rate value changed. Value: 97 Device: Polar H10 86A67320
Trying to figure out if I can get the companion app installed on my old treadmill. It is an EPIC A35T (Made by ICON Fitness) around 2013. It is running iFit 2.18.8 (rolled back from the version of iFit that disabled wifi on the treadmill). The OS is Android 2.2.
I am able to connect it via USB. I modified the batch file to run the install file without connecting via wifi so it just installs over USB.
No worries if you can't, I realize it is a 10 year old treadmill. Just trying to figure out if I can tie it to the Peloton App and breathe a little more life into the old technology. I attached a zip file that has a folder of logs from the treadmill, a log of the attempted install, and the batch file I modified. Thanks!
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.