Comments (31)
cagnulein
commented on July 20, 2024
Ok, I'll take a look ASAP!
Il giorno dom 22 ott 2023 alle 03:04 pmckinney4 ***@***.***>
ha scritto:
… Trying to figure out if I can get the companion app installed on my old
treadmill. It is an EPIC A35T (Made by ICON Fitness) around 2013. It is
running iFit 2.18.8 (rolled back from the version of iFit that disabled
wifi on the treadmill). The OS is Android 2.2.
I am able to connect it via USB. I modified the batch file to run the
install file without connecting via wifi so it just installs over USB.
No worries if you can't, I realize it is a 10 year old treadmill. Just
trying to figure out if I can tie it to the Peloton App and breathe a
little more life into the old technology. I attached a zip file that has a
folder of logs from the treadmill, a log of the attempted install, and the
batch file I modified. Thanks!
QZ-Companion-log.zip
<https://github.com/cagnulein/QZCompanionNordictrackTreadmill/files/13062127/QZ-Companion-log.zip>
—
Reply to this email directly, view it on GitHub
<#62>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWBY3PDE2B3PSB442ZLYARWK3AVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43ASLTON2WKOZRHE2TKNZRGY3DAMA>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
@pmckinney4 I have a great news! You can already use it without the companion.
In QZ, proform/nordictrack treadmill settings, set the ip of your treadmill in the setting called "Proform IP:" and restart QZ
Let me know!
from qzcompanionnordictracktreadmill.
pmckinney4
commented on July 20, 2024
Yes, it does connect and show the stats. That is pretty amazing
considering the age of the tech. I will need to spend some time adjusting
tiles, but the basics seem to be working.
Does this type of connection allow Peloton to control the speed/incline of
the treadmill or is it just going to receive the data from the treadmill
and I will have to manually adjust?
Thanks so much!
Pat
…On Sun, Oct 22, 2023 at 1:58 AM Roberto Viola ***@***.***> wrote:
@pmckinney4 <https://github.com/pmckinney4> I have a great news! You can
already use it without the companion.
In QZ, proform/nordictrack treadmill settings, set the ip of your
treadmill in the setting called "Proform IP:" and restart QZ
Let me know!
—
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AH46XRSUA33A7CSVHN6PS23YASYYXAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTONZUGAYDGNZZGY>
.
You are receiving this because you were mentioned.Message ID:
***@***.***
com>
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
great! yes we should be possible to control incline and speed for peloton!
give it a try!
Il giorno dom 22 ott 2023 alle 15:50 pmckinney4 ***@***.***>
ha scritto:
… Yes, it does connect and show the stats. That is pretty amazing
considering the age of the tech. I will need to spend some time adjusting
tiles, but the basics seem to be working.
Does this type of connection allow Peloton to control the speed/incline of
the treadmill or is it just going to receive the data from the treadmill
and I will have to manually adjust?
Thanks so much!
Pat
On Sun, Oct 22, 2023 at 1:58 AM Roberto Viola ***@***.***>
wrote:
> @pmckinney4 <https://github.com/pmckinney4> I have a great news! You
can
> already use it without the companion.
> In QZ, proform/nordictrack treadmill settings, set the ip of your
> treadmill in the setting called "Proform IP:" and restart QZ
>
> Let me know!
>
> —
> Reply to this email directly, view it on GitHub
> <
#62 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AH46XRSUA33A7CSVHN6PS23YASYYXAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTONZUGAYDGNZZGY>
> .
> You are receiving this because you were mentioned.Message ID:
> ***@***.***
> com>
>
—
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWHEDH6CBZCOMPBWLGDYAUQBNAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTONZUGEYDAOJXGM>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
from qzcompanionnordictracktreadmill.
pmckinney4
commented on July 20, 2024
Hello,
I finally had time to test with Peloton. I was able to get auto-speed
working with no issue. The auto-incline is not working.
I tested manually adjusting the incline with the incline tile in QZ. It
raises the incline .5%. It physically raises the treadmill and shows the
adjustment on the treadmill. It does not indicate a change of incline on
the tile. After pressing the raise button the first time on the tile, it
will not respond. I think I have tried most of the
Proform/Norditrack models of treadmill and the get the same result with
each one.
I attached a debug log.
Honestly, I am happy the speed is working, if you can't figure out the
incline, it is OK. I just thought I would ask in case it is a simple
setting change that you see.
Thanks!
Pat
On Sun, Oct 22, 2023 at 9:54 AM Roberto Viola ***@***.***>
wrote:
… great! yes we should be possible to control incline and speed for peloton!
give it a try!
Il giorno dom 22 ott 2023 alle 15:50 pmckinney4 ***@***.***>
ha scritto:
> Yes, it does connect and show the stats. That is pretty amazing
> considering the age of the tech. I will need to spend some time
adjusting
> tiles, but the basics seem to be working.
>
> Does this type of connection allow Peloton to control the speed/incline
of
> the treadmill or is it just going to receive the data from the treadmill
> and I will have to manually adjust?
>
> Thanks so much!
>
> Pat
>
> On Sun, Oct 22, 2023 at 1:58 AM Roberto Viola ***@***.***>
> wrote:
>
> > @pmckinney4 <https://github.com/pmckinney4> I have a great news! You
> can
> > already use it without the companion.
> > In QZ, proform/nordictrack treadmill settings, set the ip of your
> > treadmill in the setting called "Proform IP:" and restart QZ
> >
> > Let me know!
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#62 (comment)>,
>
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/AH46XRSUA33A7CSVHN6PS23YASYYXAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTONZUGAYDGNZZGY>
>
> > .
> > You are receiving this because you were mentioned.Message ID:
> > ***@***.***
> > com>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <
#62 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AAALYWHEDH6CBZCOMPBWLGDYAUQBNAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTONZUGEYDAOJXGM>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***
> com>
>
—
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AH46XRVOUSHNGKC26UR6GO3YAUQR7AVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTONZUGEYDEMBXGA>
.
You are receiving this because you were mentioned.Message ID:
***@***.***
com>
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
hi @pmckinney4 i don't see the debug log. you have to attach it from GitHub directly. thanks
from qzcompanionnordictracktreadmill.
pmckinney4
commented on July 20, 2024
Sorry about that. I did just reply with it attached to an email. I attached it here.
debug-Sun_Oct_29_20_08_23_2023.log
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
hi @pmckinney4 I don't see any peloton workout here. Am I missing something or you uploaded the wrong file? Let me know
from qzcompanionnordictracktreadmill.
pmckinney4
commented on July 20, 2024
Sorry, this one isn't from a peloton workout. I can pull one tied to a
Peloton workout tonight.
For this one, I just started the treadmill in manual mode and then tried
raising the incline with the tile in QZ. It raised it .5%. It did not
show that it raised it at all in QZ. It did show it raised on the
treadmill(in manual workout mode). I tried hitting the + button on the QZ
tile again and it would not respond after that first attempt to raise the
incline. I pulled this log file since the treadmill would not respond to
QZ in manual mode after the first call to raise the incline.
…On Mon, Oct 30, 2023 at 9:31 AM Roberto Viola ***@***.***> wrote:
hi @pmckinney4 <https://github.com/pmckinney4> I don't see any peloton
workout here. Am I missing something or you uploaded the wrong file? Let me
know
—
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AH46XRS5XEL3JRFA7T4W4TLYB6T4ZAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBVGIYDMOBXGQ>
.
You are receiving this because you were mentioned.Message ID:
***@***.***
com>
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
@pmckinney4 I can't see the debug log, you have to attach from github directly ;)
from qzcompanionnordictracktreadmill.
pmckinney4
commented on July 20, 2024
OK, I started a Peloton workout that had incline changes. I stopped it after the first incline change and there was no response from the treadmill. Speed changes worked as they should.
debug-Mon_Oct_30_18_59_12_2023.log
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
@pmckinney4 when you stop it you'are also stopping the peloton workout, that's why you see this :) so it's not a bug but it's a feature :) in that case you have also to stop the peloton workout in the peloton app, wait 30-60 seconds and start a new workout in the peloton app and then you will see a new popup on qz
Let me know if it's not clear
from qzcompanionnordictracktreadmill.
pmckinney4
commented on July 20, 2024
I apologize, but I am not following what you are saying. The auto-speed is
working perfectly, the auto incline is not working. I stopped the workout
after a couple of rounds of speed and incline changes just to get the log.
I didn't want to let it run through the whole workout without it working,
so I stopped it.
If I leave Peloton out of it and just use QZ with manual mode on the
treadmill, I can control speed with the speed tile in QZ. I try to
control the incline with the incline tile in QZ and it will increase the
incline by .5% one time, but then it will no longer respond to QZ. That
is the first log I had uploaded without QZ.
If we cannot get auto-incline working with this old treadmill, it is fine.
I understand that it is a 10 year old treadmill. I am happy the speed
portion works. I appreciate your efforts!
Pat
…On Tue, Oct 31, 2023 at 4:02 AM Roberto Viola ***@***.***> wrote:
@pmckinney4 <https://github.com/pmckinney4> when you stop it you'are also
stopping the peloton workout, that's why you see this :) so it's not a bug
but it's a feature :) in that case you have also to stop the peloton
workout in the peloton app, wait 30-60 seconds and start a new workout in
the peloton app and then you will see a new popup on qz
Let me know if it's not clear
—
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AH46XRULW4MI5YVR3KXPJUTYCCV7RAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBWGY4TINRWHA>
.
You are receiving this because you were mentioned.Message ID:
***@***.***
com>
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
ok now I got the issue. The treadmill reacts only to the first inclination request, I guess we need to do something after the first inclination. I will think about it
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
fixed! it will be in the 2.16.22! I'm building it now, let me know if you can try already in the CI here https://github.com/cagnulein/qdomyos-zwift/actions/runs/6707821411 (when the build will finish you will see the android and windows trial version of QZ 2.16.22, in the next days I will upload it as well on the play store)
from qzcompanionnordictracktreadmill.
pmckinney4
commented on July 20, 2024
Good news. I installed the version linked above on the Fire tablet that I
am using. I tested with the treadmill in manual mode. I can use the tile
in QZ to raise and lower the incline!
I am unable to test with the Peloton app. 2.16.22 is not accepting my
Peloton password. Is it possible something changed in this trial version
that won't let it link with Peloton? I just logged in on my Android phone
running 2.16.20 with no issues. Went back to the Fire tablet running
2.16.22 and tried again, and it still won't work. It was working on the
tablet with the old version before I removed it and manually installed
2.16.22.
…On Tue, Oct 31, 2023 at 10:18 AM Roberto Viola ***@***.***> wrote:
fixed! it will be in the 2.16.22! I'm building it now, let me know if you
can try already in the CI here
https://github.com/cagnulein/qdomyos-zwift/actions/runs/6707821411 (when
the build will finish you will see the android and windows trial version of
QZ 2.16.22, in the next days I will upload it as well on the play store)
—
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AH46XRTMJIWRLY2G2TOSLVDYCECEZAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBXGMYTENRWG4>
.
You are receiving this because you were mentioned.Message ID:
***@***.***
com>
from qzcompanionnordictracktreadmill.
pmckinney4
commented on July 20, 2024
Sorry, the version I just downloaded to the fire tablet is .21, not .22.
On Tue, Oct 31, 2023 at 8:34 PM Patrick McKinney ***@***.***>
wrote:
… Good news. I installed the version linked above on the Fire tablet that I
am using. I tested with the treadmill in manual mode. I can use the tile
in QZ to raise and lower the incline!
I am unable to test with the Peloton app. 2.16.22 is not accepting my
Peloton password. Is it possible something changed in this trial version
that won't let it link with Peloton? I just logged in on my Android phone
running 2.16.20 with no issues. Went back to the Fire tablet running
2.16.22 and tried again, and it still won't work. It was working on the
tablet with the old version before I removed it and manually installed
2.16.22.
On Tue, Oct 31, 2023 at 10:18 AM Roberto Viola ***@***.***>
wrote:
> fixed! it will be in the 2.16.22! I'm building it now, let me know if you
> can try already in the CI here
> https://github.com/cagnulein/qdomyos-zwift/actions/runs/6707821411 (when
> the build will finish you will see the android and windows trial version of
> QZ 2.16.22, in the next days I will upload it as well on the play store)
>
> —
> Reply to this email directly, view it on GitHub
> <#62 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AH46XRTMJIWRLY2G2TOSLVDYCECEZAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBXGMYTENRWG4>
> .
> You are receiving this because you were mentioned.Message ID:
> ***@***.***
> com>
>
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
yes there is something on the trial that doesn't like to peloton server.
anyway good news so as soon as google review the new one you will have the
fix too!
Il giorno mer 1 nov 2023 alle 01:39 pmckinney4 ***@***.***>
ha scritto:
… Sorry, the version I just downloaded to the fire tablet is .21, not .22.
On Tue, Oct 31, 2023 at 8:34 PM Patrick McKinney ***@***.***>
wrote:
> Good news. I installed the version linked above on the Fire tablet that
I
> am using. I tested with the treadmill in manual mode. I can use the tile
> in QZ to raise and lower the incline!
>
> I am unable to test with the Peloton app. 2.16.22 is not accepting my
> Peloton password. Is it possible something changed in this trial version
> that won't let it link with Peloton? I just logged in on my Android
phone
> running 2.16.20 with no issues. Went back to the Fire tablet running
> 2.16.22 and tried again, and it still won't work. It was working on the
> tablet with the old version before I removed it and manually installed
> 2.16.22.
>
> On Tue, Oct 31, 2023 at 10:18 AM Roberto Viola ***@***.***>
> wrote:
>
>> fixed! it will be in the 2.16.22! I'm building it now, let me know if
you
>> can try already in the CI here
>> https://github.com/cagnulein/qdomyos-zwift/actions/runs/6707821411
(when
>> the build will finish you will see the android and windows trial
version of
>> QZ 2.16.22, in the next days I will upload it as well on the play
store)
>>
>> —
>> Reply to this email directly, view it on GitHub
>> <
#62 (comment)>,
>> or unsubscribe
>> <
https://github.com/notifications/unsubscribe-auth/AH46XRTMJIWRLY2G2TOSLVDYCECEZAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBXGMYTENRWG4>
>> .
>> You are receiving this because you were mentioned.Message ID:
>> ***@***.***
>> com>
>>
>
—
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWD4G4QOPK3NFRMIKLTYCGK5ZAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBYGIZDINZUHE>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
from qzcompanionnordictracktreadmill.
pmckinney4
commented on July 20, 2024
I downloaded the latest version through the play store. The tile on QZ
can now control the incline. The app is connected to Peloton. The speed
changes with the app. The target incline from Peloton is desiplay on QZ,
however QZ is not changing the incline. Unfortunately, I didn't realize
the new version I downloaded disabled the logging, so I did not pull a
log. I'll try to pull one in the next day or two. Just wanted to let you
know that it is partially working with the new version of the app.
Thanks!
Pat
On Wed, Nov 1, 2023 at 1:03 AM Roberto Viola ***@***.***>
wrote:
… yes there is something on the trial that doesn't like to peloton server.
anyway good news so as soon as google review the new one you will have the
fix too!
Il giorno mer 1 nov 2023 alle 01:39 pmckinney4 ***@***.***>
ha scritto:
> Sorry, the version I just downloaded to the fire tablet is .21, not .22.
>
> On Tue, Oct 31, 2023 at 8:34 PM Patrick McKinney ***@***.***>
> wrote:
>
> > Good news. I installed the version linked above on the Fire tablet
that
> I
> > am using. I tested with the treadmill in manual mode. I can use the
tile
> > in QZ to raise and lower the incline!
> >
> > I am unable to test with the Peloton app. 2.16.22 is not accepting my
> > Peloton password. Is it possible something changed in this trial
version
> > that won't let it link with Peloton? I just logged in on my Android
> phone
> > running 2.16.20 with no issues. Went back to the Fire tablet running
> > 2.16.22 and tried again, and it still won't work. It was working on
the
> > tablet with the old version before I removed it and manually installed
> > 2.16.22.
> >
> > On Tue, Oct 31, 2023 at 10:18 AM Roberto Viola ***@***.***>
> > wrote:
> >
> >> fixed! it will be in the 2.16.22! I'm building it now, let me know if
> you
> >> can try already in the CI here
> >> https://github.com/cagnulein/qdomyos-zwift/actions/runs/6707821411
> (when
> >> the build will finish you will see the android and windows trial
> version of
> >> QZ 2.16.22, in the next days I will upload it as well on the play
> store)
> >>
> >> —
> >> Reply to this email directly, view it on GitHub
> >> <
>
#62 (comment)>,
>
> >> or unsubscribe
> >> <
>
https://github.com/notifications/unsubscribe-auth/AH46XRTMJIWRLY2G2TOSLVDYCECEZAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBXGMYTENRWG4>
>
> >> .
> >> You are receiving this because you were mentioned.Message ID:
> >> ***@***.***
> >> com>
> >>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <
#62 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AAALYWD4G4QOPK3NFRMIKLTYCGK5ZAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBYGIZDINZUHE>
> .
>
> You are receiving this because you commented.Message ID:
> ***@***.***
> com>
>
—
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AH46XRQ56MUUKGT724724Y3YCHJ2NAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBYGQYTGMZTGM>
.
You are receiving this because you were mentioned.Message ID:
***@***.***
com>
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
ok let me know!
Il giorno lun 6 nov 2023 alle 01:28 pmckinney4 ***@***.***>
ha scritto:
… I downloaded the latest version through the play store. The tile on QZ
can now control the incline. The app is connected to Peloton. The speed
changes with the app. The target incline from Peloton is desiplay on QZ,
however QZ is not changing the incline. Unfortunately, I didn't realize
the new version I downloaded disabled the logging, so I did not pull a
log. I'll try to pull one in the next day or two. Just wanted to let you
know that it is partially working with the new version of the app.
Thanks!
Pat
On Wed, Nov 1, 2023 at 1:03 AM Roberto Viola ***@***.***>
wrote:
> yes there is something on the trial that doesn't like to peloton server.
> anyway good news so as soon as google review the new one you will have
the
> fix too!
>
> Il giorno mer 1 nov 2023 alle 01:39 pmckinney4 ***@***.***>
> ha scritto:
>
> > Sorry, the version I just downloaded to the fire tablet is .21, not
.22.
> >
> > On Tue, Oct 31, 2023 at 8:34 PM Patrick McKinney ***@***.***>
> > wrote:
> >
> > > Good news. I installed the version linked above on the Fire tablet
> that
> > I
> > > am using. I tested with the treadmill in manual mode. I can use the
> tile
> > > in QZ to raise and lower the incline!
> > >
> > > I am unable to test with the Peloton app. 2.16.22 is not accepting
my
> > > Peloton password. Is it possible something changed in this trial
> version
> > > that won't let it link with Peloton? I just logged in on my Android
> > phone
> > > running 2.16.20 with no issues. Went back to the Fire tablet running
> > > 2.16.22 and tried again, and it still won't work. It was working on
> the
> > > tablet with the old version before I removed it and manually
installed
> > > 2.16.22.
> > >
> > > On Tue, Oct 31, 2023 at 10:18 AM Roberto Viola ***@***.***>
> > > wrote:
> > >
> > >> fixed! it will be in the 2.16.22! I'm building it now, let me know
if
> > you
> > >> can try already in the CI here
> > >> https://github.com/cagnulein/qdomyos-zwift/actions/runs/6707821411
> > (when
> > >> the build will finish you will see the android and windows trial
> > version of
> > >> QZ 2.16.22, in the next days I will upload it as well on the play
> > store)
> > >>
> > >> —
> > >> Reply to this email directly, view it on GitHub
> > >> <
> >
>
#62 (comment)>,
>
> >
> > >> or unsubscribe
> > >> <
> >
>
https://github.com/notifications/unsubscribe-auth/AH46XRTMJIWRLY2G2TOSLVDYCECEZAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBXGMYTENRWG4>
>
> >
> > >> .
> > >> You are receiving this because you were mentioned.Message ID:
> > >> ***@***.***
> > >> com>
> > >>
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#62 (comment)>,
>
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/AAALYWD4G4QOPK3NFRMIKLTYCGK5ZAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBYGIZDINZUHE>
>
> > .
> >
> > You are receiving this because you commented.Message ID:
> > ***@***.***
> > com>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <
#62 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AH46XRQ56MUUKGT724724Y3YCHJ2NAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBYGQYTGMZTGM>
> .
> You are receiving this because you were mentioned.Message ID:
> ***@***.***
> com>
>
—
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWFWGQUYRDQCOVQYLJ3YDAVKHAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOJTHEYDEOBXGA>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
from qzcompanionnordictracktreadmill.
pmckinney4
commented on July 20, 2024
I ran a Peloton workout. Speed changes worked. Incline did not change at all. Incline can be adjusted using the incline tile on QZ, so the app can talk to the treadmill. I attached the debug file. I also attached a picture. The treadmill is registering 3.9mph, but it is only showing 3.5 on QZ.
This is an EPIC A35T made by iCon fitness about 10 years ago. I am not sure if there would be a better model for me to select in QZ that my give me better results.
debug-Sat_Nov_11_10_28_07_2023[1].log
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
i guess the issue is that with peloton qz is trying to change at the same
time inclination and speed, this will lead into a null action to the
treadmill.
I will try to separate the event.
You can validate my ipotesis pressing both plus buttons of speed and
incline at the same time, i guess it will not work.
Let me know!
Roberto Viola
Software engineer and open source enthusiast
http://robertoviola.cloud
Il giorno dom 12 nov 2023 alle ore 01:05 pmckinney4 <
***@***.***> ha scritto:
… I ran a Peloton workout. Speed changes worked. Incline did not change at
all. Incline can be adjusted using the incline tile on QZ, so the app can
talk to the treadmill. I attached the debug file. I also attached a
picture. The treadmill is registering 3.9mph, but it is only showing 3.5 on
QZ.
This is an EPIC A35T made by iCon fitness about 10 years ago. I am not
sure if there would be a better model for me to select in QZ that my give
me better results.
debug-Sat_Nov_11_10_28_07_2023[1].log
<https://github.com/cagnulein/QZCompanionNordictrackTreadmill/files/13326808/debug-Sat_Nov_11_10_28_07_2023.1.log>
[image: QZ MPH]
<https://user-images.githubusercontent.com/33156038/282270906-b7c63a47-cf14-4941-beab-8bd2920e062e.jpg>
—
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWCDI6QP2OYXIZDMFXDYEAHFVAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBWHE2DSMZWGA>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
from qzcompanionnordictracktreadmill.
pmckinney4
commented on July 20, 2024
I tested. You are correct, it will not take both commands at the same time. It works fine to only do one at a time.
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
perfect, i will add the patch in the next days!
we are near!
Il giorno lun 13 nov 2023 alle 00:51 pmckinney4 ***@***.***>
ha scritto:
… I tested. You are correct, it will not take both commands at the same
time. It works fine to only do one at a time.
—
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWD5VCMR6JLWEKEWAJDYEFOJ3AVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBXGI4DMNBSHE>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
done! @pmckinney4 are you on android or ios with qz?
from qzcompanionnordictracktreadmill.
pmckinney4
commented on July 20, 2024
Android, thanks!
…On Mon, Nov 13, 2023 at 8:55 AM Roberto Viola ***@***.***> wrote:
done! @pmckinney4 <https://github.com/pmckinney4> are you on android or
ios with qz?
—
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AH46XRWTPABOSAKUKAUQG4TYEIRDLAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBYGIYDSMBYGA>
.
You are receiving this because you were mentioned.Message ID:
***@***.***
com>
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
perfect, give it a try to the demo just to check that the issue is fixed
https://github.com/cagnulein/qdomyos-zwift/releases/download/nightly/android-debug.apk
google version is updating in a couple of days
Il giorno mar 14 nov 2023 alle 03:21 pmckinney4 ***@***.***>
ha scritto:
… Android, thanks!
On Mon, Nov 13, 2023 at 8:55 AM Roberto Viola ***@***.***>
wrote:
> done! @pmckinney4 <https://github.com/pmckinney4> are you on android or
> ios with qz?
>
> —
> Reply to this email directly, view it on GitHub
> <
#62 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AH46XRWTPABOSAKUKAUQG4TYEIRDLAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBYGIYDSMBYGA>
> .
> You are receiving this because you were mentioned.Message ID:
> ***@***.***
> com>
>
—
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWHAYPJIE6WZGGFN5CDYELISHAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBZGQZTQOBUGA>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
from qzcompanionnordictracktreadmill.
pmckinney4
commented on July 20, 2024
I finally had time to install and test. It appears to be working to press
the speed and incline buttons on QZ at the same time. I can't test
with Peloton as the test version won't authenticate with Peloton correctly.
On Mon, Nov 13, 2023 at 11:40 PM Roberto Viola ***@***.***>
wrote:
… perfect, give it a try to the demo just to check that the issue is fixed
https://github.com/cagnulein/qdomyos-zwift/releases/download/nightly/android-debug.apk
google version is updating in a couple of days
Il giorno mar 14 nov 2023 alle 03:21 pmckinney4 ***@***.***>
ha scritto:
> Android, thanks!
>
> On Mon, Nov 13, 2023 at 8:55 AM Roberto Viola ***@***.***>
> wrote:
>
> > done! @pmckinney4 <https://github.com/pmckinney4> are you on android
or
> > ios with qz?
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#62 (comment)>,
>
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/AH46XRWTPABOSAKUKAUQG4TYEIRDLAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBYGIYDSMBYGA>
>
> > .
> > You are receiving this because you were mentioned.Message ID:
> > ***@***.***
> > com>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <
#62 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AAALYWHAYPJIE6WZGGFN5CDYELISHAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBZGQZTQOBUGA>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***
> com>
>
—
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AH46XRT7HOUPVPNG4OLAGSTYELY25AVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBZGUZTSNJWHE>
.
You are receiving this because you were mentioned.Message ID:
***@***.***
com>
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
perfect i will push to the play store asap!
Il giorno mer 22 nov 2023 alle 03:13 pmckinney4 ***@***.***>
ha scritto:
… I finally had time to install and test. It appears to be working to press
the speed and incline buttons on QZ at the same time. I can't test
with Peloton as the test version won't authenticate with Peloton
correctly.
On Mon, Nov 13, 2023 at 11:40 PM Roberto Viola ***@***.***>
wrote:
> perfect, give it a try to the demo just to check that the issue is fixed
>
>
https://github.com/cagnulein/qdomyos-zwift/releases/download/nightly/android-debug.apk
>
> google version is updating in a couple of days
>
> Il giorno mar 14 nov 2023 alle 03:21 pmckinney4 ***@***.***>
> ha scritto:
>
> > Android, thanks!
> >
> > On Mon, Nov 13, 2023 at 8:55 AM Roberto Viola ***@***.***>
> > wrote:
> >
> > > done! @pmckinney4 <https://github.com/pmckinney4> are you on
android
> or
> > > ios with qz?
> > >
> > > —
> > > Reply to this email directly, view it on GitHub
> > > <
> >
>
#62 (comment)>,
>
> >
> > > or unsubscribe
> > > <
> >
>
https://github.com/notifications/unsubscribe-auth/AH46XRWTPABOSAKUKAUQG4TYEIRDLAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBYGIYDSMBYGA>
>
> >
> > > .
> > > You are receiving this because you were mentioned.Message ID:
> > > ***@***.***
> > > com>
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
>
#62 (comment)>,
>
> > or unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/AAALYWHAYPJIE6WZGGFN5CDYELISHAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBZGQZTQOBUGA>
>
> > .
> > You are receiving this because you commented.Message ID:
> > ***@***.***
> > com>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <
#62 (comment)>,
> or unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AH46XRT7HOUPVPNG4OLAGSTYELY25AVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMBZGUZTSNJWHE>
> .
> You are receiving this because you were mentioned.Message ID:
> ***@***.***
> com>
>
—
Reply to this email directly, view it on GitHub
<#62 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AAALYWD5HH2YLNRDGSKZNLDYFVNUZAVCNFSM6AAAAAA6KQNCYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRRHE4DAMJUHA>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
from qzcompanionnordictracktreadmill.
cagnulein
commented on July 20, 2024
i fixed also the peloton login issue with this one https://github.com/cagnulein/qdomyos-zwift/actions/runs/6971450470
from qzcompanionnordictracktreadmill.
stale
commented on July 20, 2024
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
from qzcompanionnordictracktreadmill.
Related Issues (20)
- Auto Speed & Incline HOT 4
- Getting auto-incline working HOT 32
- Failing to connect to NordicTrack T14.0 HOT 92
- Getting HR HOT 1
- Proform Power T7I not connecting to QZ IOS App HOT 59
- certificate issue HOT 21
- Proform Studio Bike Pro Incompatibility HOT 6
- No connection to x22i HOT 241
- NordicTrack EXP 10i / QZ on iOS - Setting speed/inc not working HOT 22
- Proform Pro C10U - resistance & companion issues HOT 39
- X32i issue with changing Speed/Incline from QZ Fitness android app HOT 30
- Elevation Issue - Mike HOT 123
- 2021 NordicTrack 2950 QZ Controls Not Working HOT 2
- Unable to get priviliged mode, unable to install QZ Companion. HOT 15
- Can’t open qzcompanion.apk file on s22i HOT 3
- nordiktrak T6.5si control HOT 6
- Installed QZ companion on Proform studio bike but doesn’t seem to be linking with QZ app on iphone HOT 9
- MANAGE_EXTERNAL_STORAGE HOT 6
- Nordictrack Elite 1000 HOT 53
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from qzcompanionnordictracktreadmill.