st3dprinter / marlin4st Goto Github PK
View Code? Open in Web Editor NEWA Marlin FW for the ST Microelectronics 3D printer board STEVAL-3DP001V1
License: GNU General Public License v3.0
A Marlin FW for the ST Microelectronics 3D printer board STEVAL-3DP001V1
License: GNU General Public License v3.0
Hi, I planned to set up a serial communication between the STEVAL-3DP001V1 board and a python script to perform 3d printing. I followed the instruction of official document of STEVAL-3DP001V1 board https://www.st.com/content/ccc/resource/technical/document/user_manual/group0/66/e3/47/bb/0e/6c/45/9f/DM00291039/files/DM00291039.pdf/jcr:content/translations/en.DM00291039.pdf
to build and load the firmware. However, when I sent a G-code command through the serial port, the board only responses me with '�' characters. I also tried the Pronterface example which is listed in the official document and which the connection are also fail.
I connect the PC to the board through its the st-link port by USB, I use pySerial to connect to the serial port ttyACM0. I used to do the same thing to connect to a arduino 3d print board. I wonder are there any extra steps to be done to connect to the serial port through the st-link. I am kinda new with the STM board, your help will be greatly appreicated. Thanks.
Hi
How can i use the cubeMX?
I would like add support for stm32F303RE and stm32f411e-disco. is it possible?
Was this setup, originally, with CubeMX? I am trying to port this to Marlin 2.0 and was going to update the BSP but cannot find the ioc project.
Hello, I tried to use your project to customize the firmware but there are several errors in the project that blocks compilation.
"fatal erro: ffconf.h: No such file or directory"
"make: ***[STM322/FatFs/diskio.o] Error 1"
"recipe for target 'STM32/FatFs/diskio.o' failed"
How can i get rid of theses errors ?
Hello,
Is it possible to build a new branch with the latest Marlin Version. There have been a lot of improvements from RC7.
Thanks,
J.
How to import the IAR version?
"The firmware comes with the complete source code for the OpenSTM32 (free) and IAR
development environments."
I use OpenSTM32 import the Marlin4ST project errors.
hi
When will the next version be updated?I found that IR_OUT pins can't be used as ADC. Is there any solution?Sorry, my English is not very good, I hope I can understand.
Good day
Hi, I have bought an ST board for evaluation.
we have wired in power supply and had it up and running. we used repetier host as our terminal software which connected smoothly and started reading what comes out of the board. we started doing regular checks on components.
Problem1:
first we started with switches; x and y worked but z didnot. it was not about wiring. we went into pin files and had to change input output signals inside the framework, it was reversely defined only on that port we used for z switch. all the rest of the ports was fine, somehow.
we managed to get z switch working by rewriting the strings.
we checked heating elements. they did work.
Problem 2:
we started checking motors. none of them worked. we started measuring potentials through driver connector legs together with processor connections. for some reason drivers didnot get signal when triggered via commands from terminal software. while we were trying to figure out which leg doesnot receive signal by measuring, I made a short circuit and burnt the driver (probably processor also).
Now I have ordered a new board to continue testing.
But, I am afraid of getting it burnt again. Therefore, I am writing to see if someone had faced a similar problem and can share a solution for it. Maybe ST people may provide a solution for this?
Looking forward to your help,
arda
stm32_cube\Middlewares\Third_Party\Marlin\configuration.h
is not exist in repository.
Will you be adding a license to this project?
The objective of the thread is to list all features you want to have in the new 3D printer controler board.
Describe the feature and why you need it.
No updates. Any news? Im allready buy this board
stm32f4xx_3dprinter_misc.h -> BSP_MiscTickSetFreq
There is 'newPeriod' undeclared. It should be newFreq.
Can you port GRBL or TinyG2 to this board?
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.