Hi there,
First of all thanks a lot for creating this, I have used it for multiple years using V1 and V2. However, V2 stopped working and I followed all the instructions in the V3 page: installing Raspberry Pi OS Lite on my raspberry 2.
During the installation, I get the following error:
'Job for snapd.service failed because the control process exited with error code'
If I do systemctl status snapd I get the following:
` systemctl status snapd
● snapd.service - Snap Daemon
Loaded: loaded (/lib/systemd/system/snapd.service; enabled; vendor preset:>
Active: failed (Result: exit-code) since Fri 2023-08-04 18:41:15 BST; 5min>
TriggeredBy: ● snapd.socket
Process: 760 ExecStart=/usr/lib/snapd/snapd (code=exited, status=1/FAILURE)
Main PID: 760 (code=exited, status=1/FAILURE)
CPU: 782ms
Aug 04 18:41:15 raspberrypi systemd[1]: snapd.service: Scheduled restart job, r>
Aug 04 18:41:15 raspberrypi systemd[1]: Stopped Snap Daemon.
Aug 04 18:41:15 raspberrypi systemd[1]: snapd.service: Start request repeated t>
Aug 04 18:41:15 raspberrypi systemd[1]: snapd.service: Failed with result 'exit>
Aug 04 18:41:15 raspberrypi systemd[1]: Failed to start Snap Daemon.
Aug 04 18:41:15 raspberrypi systemd[1]: snapd.service: Triggering OnFailure= de>
Aug 04 18:41:15 raspberrypi systemd[1]: snapd.service: Failed to enqueue OnFail>`
And when I try /usr/lib/snapd/snapd I get:
AppArmor status: apparmor not enabled
2023/08/04 18:53:03.159826 daemon.go:347: started snapd/2.49-1+rpi1+deb11u2 (ser ies 16; classic; devmode) raspbian/11 (armel) linux/6.1.21.
2023/08/04 18:53:03.459476 daemon.go:440: adjusting startup timeout by 30s (pess imistic estimate of 30s plus 5s per snap)
cannot run daemon: state startup errors: [cannot obtain snap-seccomp version inf ormation:
2023/08/04 18:53:03 unknown kernel arch "armv6l"
panic: unknown kernel arch "armv6l"
goroutine 1 [running]:
log.Panicf(0x600e6d, 0x16, 0x2497f48, 0x1, 0x1)
log/log.go:358 +0x9c
github.com/snapcore/snapd/arch.dpkgArchFromKernelArch(0x24149b6, 0x6, 0x0, 0x249 e51c)
github.com/snapcore/snapd/arch/arch.go:117 +0x460
github.com/snapcore/snapd/arch.DpkgKernelArchitecture(0x5fb00c, 0x5)
github.com/snapcore/snapd/arch/arch.go:95 +0x18
main.init()
github.com/snapcore/snapd/cmd/snap-seccomp/main.go:637 +0x5f0
-----]
Is there any solution for this?
Keep up the good work!