Hellogopher is a Makefile that makes your conventional Go project build from anywhere, for anyone, with just make
.
$ wget https://raw.githubusercontent.com/cloudflare/hellogopher/master/Makefile
$ $EDITOR Makefile # modify IMPORT_PATH
$ make setup
$ git add Makefile .gitignore vendor/
$ make
$ ./bin/hello
Hello, world!
$ make test
$ make cover
You can now just clone the repository anywhere, and make
it. go get
still works as usual.
If you get cannot find package
errors, you need to read the Vendoring section.
IMPORT_PATH
is the absolute unique name of your repository. It's usually where it can be found, too. For example github.com/FiloSottile/example
.
You use the IMPORT_PATH
any time you want to refer to your code: in the Makefile, with import
, with go get
.
If your IMPORT_PATH
is github.com/FiloSottile/example
, the code in the root of your repository is github.com/FiloSottile/example
(and it will compile to a binary named example
), the code in the folder foo
is github.com/FiloSottile/example/foo
, cmd/bar
is github.com/FiloSottile/example/cmd/bar
, and so on.
If you change the IMPORT_PATH
you have to run make clean
.
A hellogopher project uses the official Go vendoring style: third-party packages go in ./vendor/
, like ./vendor/github.com/fatih/color
. The Makefile will intentionally ignore your system GOPATH to force you to vendor.
Hellogopher has no opinions on how you populate the vendor folder, but a tool that is guaranteed to work as flexibly as hellogopher is gvt. If you use make setup
you'll find gvt in ./bin/gvt
.
Don't forget to check the vendor folder into your VCS.
$ ./bin/gvt fetch github.com/fatih/color
$ git add vendor/
All the tools used by the Makefile have been vetted and fixed to work out of the box. However, most other tools (gometalinter
, guru
, ...) and editors are very likely not to work unless you place the repository at $GOPATH/src/$IMPORT_PATH
.
The point of hellogopher is not to be an universal wrapper or the only tool you use, but to get you started easily before you learn GOPATH.
Go developers should know and use GOPATH. But it shouldn't be the first thing they are exposed to. At Cloudflare we noticed it was the main cause of friction for novice or casual Go users. They expect to just clone a repository anywhere, and be able to build it.
Hellogopher allows non-Go developers to easily build the project in any environment, and provides enough tools (test
, cover
, format
) for the casual contributor.
Still, a hellogopher project is just a standard go get
-able project. Regular Go developers should place the repository at its proper place in the GOPATH, so they can use all other tools that expect a GOPATH. (And they can still benefit from the convenience methods like make cover
and the vendoring enforcement.)
Hellogopher makes your install instructions look like this:
$ go get -u github.com/FiloSottile/zcash-mini
- or -
$ git clone https://github.com/FiloSottile/zcash-mini
$ cd zcash-mini && make && sudo cp ./bin/zcash-mini /usr/local/bin/
It achieves similar results to gb, but preserving the conventional structure of a Go project. It works similarly to the Camlistore build system but without the temporary copies.
A hellogopher-based project is a proper Go repository, so you can go get
it and import it from other packages. But at the same time it includes a powerful Makefile that isolates the build from the system and works from anywhere, without having to setup a GOPATH.
A standard build target builds a binary and places it in bin/
.
Version and build time are injected at link time.
All operations take full advantage of incremental builds.
The system GOPATH is ignored, so only vendored dependencies are used.
make test
runs go vet
and go test -race
on all packages, excluding those matching a pattern in IGNORED_PACKAGES
.
GODEBUG=cgocheck=2
is set so that the (expensive) full suite of cgo checks are run during tests. It has no effect if you don't use cgo.
It installs the race libraries (in the hidden GOPATH) just so it does not have to compile them the next time.
make cover
aggregates the coverage of all tests over all packages. That is, it runs the test suite of all packages, each time collecting the coverage over all packages, and then aggregates all those reports into one.
It prints detailed statistics and opens the full HTML report in the browser.
Note: make cover
does not exit 1 on failure.
make format
runs goimports
on all non-ignored packages.
CI mode is enabled if the environment variable CI
is set to 1.
The make test
full verbose output is both sent to stdout/stderr, and saved in .GOPATH/test/vet.txt
and .GOPATH/test/output.txt
.
The make cover
HTML report is saved in .GOPATH/cover/all.html
.
You can cross-compile easily with GOOS=linux make
. The generated binary will end up in bin/OS_ARCH/
, like bin/linux_amd64/hello
.
Hellogopher works nicely also if you share a folder between architectures, for example with Docker for Mac.
Don't use relative imports (the ones starting with ./
). Just don't. No, really.
Binary targets are .PHONY because hellogopher uses the Go native incremental build support.
Binaries will be named after the folder they are in. If your package main
is in the repository root and not in a subfolder, the binary will be named after the repository name. This is a fundamental concept of Go.
To exclude a package from make test
/cover
/list
/format
add its name (or a part of it) to IGNORED_PACKAGES
. By default vendored packages are excluded. You might need to do this if you have 3rd party code outside of vendor/
, too.
If you add Makefile binary targets don't forget the .GOPATH/.ok
dependency.
If you need to go build
a lone .go
file instead of a package, first stop and think if it shouldn't be a package instead. Then if you insist build them like this:
go build $(GOPATH)/src/$(IMPORT_PATH)/my/go/file.go
To run the Makefile verbosely, printing commands and build progress, set V := 1
at the top of the Makefile. You can use make $TARGET V=1
and make $TARGET V=
to control this on a per-call basis.
You don't need to read, understand or like this to use hellogopher.
The trick to the magic Makefile is that it creates a GOPATH in .GOPATH, and places a symlink back to the root of the repo at the position where your package is supposed to be.
For example, .GOPATH/src/github.com/FiloSottile/example -> ../../../..
.
It then uses .GOPATH as the GOPATH, and runs go install
.
The GOPATH is permanent and local, and changes don't need to be synced since it uses a symlink to the repo. So incremental builds just work.
There are a lot of workarounds to make the symlink work, but they all revolve around the fact that ./...
does not traverse the symlink. So instead we first cd into it, and run go list ./...
from that perspective. Similarly, goimports needs to know that the files are relative to the GOPATH to recognize the vendor folder, so we pass prefixed paths to it.
This is a bit complex, but the idea is that if you use other tools, you'll place the package in the right place in your system GOPATH and not use the symlink trick. All the work to make the Makefile tools work with symlinks has already been done for you :)