This is a fork of Adalight working with WS2811/WS2812 LED using the FastLED library (v 3.1).

FastLED library can be found on Github here : https://github.com/FastLED/FastLED

• An Arduino Nano (genuine or not).
• A 1000µF (or more) electrolytic capacitor.
• A resistance between 200 and 600 Ohms.
• WS2812B RGB LED strip (max 240 LEDs) I recommend a strip with 60 LEDs/meter.
• A 5v power supply. To calculate the required current do: 0.06A × NUM_LEDS.
• A soldering iron and cables or Dupont wires and 3 lines LED strip edge connector.
• Solderless breadboard or proto-board (if you want to do a welded version).
• Prismatik (Linux, Windows, Mac): https://github.com/psieg/Lightpack/releases