Giter Club home page Giter Club logo

br-hisicam's Issues

job

Hello, I need to insert my logo on a camera based on HI3516CV300 IMX307 keeping the original firmware. Firmware 3516CV300_IMX307_B1T0A1M0C1P1_W_20.1.3.2
You do?
What the value ?
Thank you

Xiaomi MJSXJ02HL - Hi3518ERNCV300

Hi,

I just opened this low cost camera and I leave here the serial dump. The chip physical marking is "Hi3518ERNCV300".

I don't know which sensor it has, maybe you can see from the log.

I currently don't have any use for cameras so I will not make any work on this, so I just searched for a project using this SOCs to leave the serial dump for someone interested in getting this cameras.

I had to destroy most of the plastic case to open the camera, so it's not very hackable friendly.

Regards

System startup

Uncompress Ok!

U-Boot 2016.11 (Dec 04 2019 - 14:52:34 +0800)hi3518ev300

Relocation Offset is: 03731000
Relocating to 43f31000, new gd at 43ef0ef0, sp at 43ef0ed0
SPI Nor:  NAND:  0 MiB
MMC:   Card did not respond to voltage select!
No SD device found !
hisi-sdhci: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
[hl-boot] spi_flash_probe!!!!
[hl-boot] map_physmem!!!!
[hl-boot] Spi para flash read...
[hl-boot] FWGRADEUP not find !!!!!!!!!
Net:   No ethernet found.
Hit any key to stop autoboot:  0 
liuyang_do_sd_start!!!!!!!!!!!!!!!!!!!!!!!!
liuyang_flash->read!!!!!!!!!!!!!!!!!!!!!!!!
liuyang_search_pbuf!!!!!!!!!!!!!!!!!!!!!!!!
FWGRADEUP not find !!!!!!!!!
liuyang_bootargs!!!!!!!!!!!!!!!!!!!!!!!!
device 0 offset 0x40000, size 0x200000

SF: 2097152 bytes @ 0x40000 Read: OK
## Booting kernel from Legacy Image at 40000000 ...
   Image Name:   Linux-4.9.37
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1916842 Bytes = 1.8 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Loading Kernel Image ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 4.9.37 (root@chenx-Latitude-3490) (gcc version 6.3.0 (HC&C V100R002C00B032_20190114) ) #7 Thu Oct 17 10:45:21 CST 2019
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: Hisilicon HI3518EV300 DEMO Board
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 11430
Kernel command line: mem=45M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=squashfs rw mtdparts=hi_sfc:256K(boot),1984K(kernel),3904K(rootfs),3904K(app),1984K(kback),3904K(aback),384K(cfg),64K(para)
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 40340K/46080K available (3593K kernel code, 147K rwdata, 1020K rodata, 156K init, 246K bss, 5740K reserved, 0K cma-reserved)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xc3000000 - 0xff800000   ( 968 MB)
    lowmem  : 0xc0000000 - 0xc2d00000   (  45 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc038a818   (3595 kB)
      .init : 0xc048b000 - 0xc04b2000   ( 156 kB)
      .data : 0xc04b2000 - 0xc04d6ce0   ( 148 kB)
       .bss : 0xc04d8000 - 0xc0515a18   ( 247 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:16 nr_irqs:16 16
Gic dist init...
arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 20ns
clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x40008240 - 0x40008298
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Serial: AMBA PL011 UART driver
12040000.uart: ttyAMA0 at MMIO 0x12040000 (irq = 20, base_baud = 0) is a PL011 rev2
console [ttyAMA0] enabled
ssp-pl022 12070000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12070000.spi: mapped registers from 0x12070000 to c3063000
ssp-pl022 12071000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12071000.spi: mapped registers from 0x12071000 to c3067000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=14 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pl061_gpio 120b0000.gpio_chip: PL061 GPIO chip @0x120b0000 registered
pl061_gpio 120b1000.gpio_chip: PL061 GPIO chip @0x120b1000 registered
pl061_gpio 120b2000.gpio_chip: PL061 GPIO chip @0x120b2000 registered
pl061_gpio 120b4000.gpio_chip: PL061 GPIO chip @0x120b4000 registered
pl061_gpio 120b5000.gpio_chip: PL061 GPIO chip @0x120b5000 registered
pl061_gpio 120b6000.gpio_chip: PL061 GPIO chip @0x120b6000 registered
pl061_gpio 120b7000.gpio_chip: PL061 GPIO chip @0x120b7000 registered
pl061_gpio 120b8000.gpio_chip: PL061 GPIO chip @0x120b8000 registered
brd: module loaded
hisi-sfc hisi_spi_nor.0: SPI Nor ID Table Version 1.2
hisi-sfc hisi_spi_nor.0: all blocks is unlocked.
hisi-sfc hisi_spi_nor.0: gd25q128 (Chipsize 16 Mbytes, Blocksize 64KiB)
8 cmdlinepart partitions found on MTD device hi_sfc
8 cmdlinepart partitions found on MTD device hi_sfc
Creating 8 MTD partitions on "hi_sfc":
0x000000000000-0x000000040000 : "boot"
0x000000040000-0x000000230000 : "kernel"
0x000000230000-0x000000600000 : "rootfs"
0x000000600000-0x0000009d0000 : "app"
0x0000009d0000-0x000000bc0000 : "kback"
0x000000bc0000-0x000000f90000 : "aback"
0x000000f90000-0x000000ff0000 : "cfg"
0x000000ff0000-0x000001000000 : "para"
dwc3 10030000.hidwc3: Configuration mismatch. dr_mode forced to host
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x20010010
xhci-hcd xhci-hcd.0.auto: irq 113, io mem 0x10030000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: hub can't support USB3.0
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
i2c /dev entries driver
hibvt-i2c 12060000.i2c: hibvt-i2c0@100000hz registered
hibvt-i2c 12061000.i2c: hibvt-i2c1@100000hz registered
hibvt-i2c 12062000.i2c: hibvt-i2c2@100000hz registered
uvcvideo: Unable to create debugfs directory
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on 10010000.sdhci [10010000.sdhci] using ADMA in legacy mode
mmc1: SDHCI controller on 10020000.sdhci [10020000.sdhci] using ADMA in legacy mode
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
hctosys: unable to open rtc device (rtc0)
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 156K (c048b000 - c04b2000)
This architecture does not have kernel memory protection.
 __________________________________
|                                  |
|                                  |
|                                  |
|                                  |
| _   _             _           _  |
|| | | |_   _  __ _| |     __ _(_) |
|| |_| | | | |/ _| | |  _ / _| | | |
||  _  | |_| | (_| | |_| | (_| | | |
||_| |_|\__,_|\__,_|_____|\__,_|_| |
|                                  |
|                                  |
|___________________HuaLai_Fw...___|

[RCS]: /etc/init.d/S00devs
[RCS]: /etc/init.d/S01udev
Start mount rootfs...
mount -t squashfs /dev/mtdblock3 /usr/app
random: mount: uninitialized urandom read (4 bytes read)
mount -t squashfs /dev/mtdblock4 /backk
mount -t squashfs /dev/mtdblock5 /backa
mount -t jffs2 /dev/mtdblock6 /configs
LD_LIBRARY_PATH=/lib:/usr/lib:/usr/app/lib
PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/app/bin:/usr/app/sbin
export LD_LIBRARY_PATH=/thirdlib:/lib:/usr/lib:/usr/app/lib
export LD_LIBRARY_PATH PATH
/usr/app/bin/init_app.sh
*** Board tools : ver0.0.1_20121120 *** 
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112C0048: 0x00001E30 --> 0x00001D54 
[END]
*** Board tools : ver0.0.1_20121120 *** 
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112C004C: 0x00001160 --> 0x00001174 
[END]
*** Board tools : ver0.0.1_20121120 *** 
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112C0064: 0x00001160 --> 0x00001174 
[END]
*** Board tools : ver0.0.1_20121120 *** 
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112C0060: 0x00001160 --> 0x00001174 
[END]
*** Board tools : ver0.0.1_20121120 *** 
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112C005C: 0x00001160 --> 0x00001174 
[END]
*** Board tools : ver0.0.1_20121120 *** 
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112C0058: 0x00001160 --> 0x00001174 
[END]
*** Board tools : ver0.0.1_20121120 *** 
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x10020028: 0x20000000 --> 0x28000000 
[END]
*** Board tools : ver0.0.1_20121120 *** 
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x10020028: 0x28000000 --> 0x20000000 
[END]
rtl8189ftv: loading out-of-tree module taints kernel.
RTL871X: module init start
RTL871X: rtl8189ftv v4.3.24.7_21113.20170208.nova.1.02
RTL871X: build time: Jun 19 2019 14:40:43
RTL871X: module init ret=0
sdhci-hisi 10020000.sdhci: card claims to support voltages below defined range
sh: 45M: bad number
======online_flag = 0, cmos_yuv_flag = 0, sensor=f22, chip=hi3518ev300, board=demo======
sysconfig init success!
Module himedia: init ok
Hisilicon Media Memory Zone Manager
hi_osal 1.0 init success!
hi3516ev200_base: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
load sys.ko for Hi3516EV200...OK!
mmc1: new high speed SDIO card at address 0001
RTL871X: ++++++++rtw_drv_init: vendor=0x024c device=0xf179 class=0x07
load region.ko for Hi3516EV200...OK!
random: fast init done
load vgs.ko for Hi3516EV200...OK!
load vi.ko for Hi3516EV200...OK !
ISP Mod init!
load vpss.ko for Hi3516EV200...OK!
RTL871X: HW EFUSE
RTL871X: hal_com_config_channel_plan chplan:0x20
load chnl.ko for Hi3516EV200...OK!
load vedu.ko for Hi3516EV200...OK!
load rc.ko for Hi3516EV200...OK!
load venc.ko for Hi3516EV200...OK!
load h264e.ko for Hi3516EV200...OK!
load h265e.ko for Hi3516EV200...OK!
load jpege.ko for Hi3516EV200...OK!
load ive.ko for Hi3516EV200...OK!
RTL871X: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1
RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=50:ec:50:49:16:bf
load mipi_rx driver successful!
/

===========welcome to assis process=========
[Build date] Jun 30 2020 (13:39:32)
[exec-assis,0144]msgSndId:0
[exec-assis,0159]msgRcvId:32769
[SDK-DOG]dbg: turn on watchdog success!

===========welcome to iCamera_app===========
[Build date] Jun 30 2020 (13:39:33)
[msg:79]log: msg_queue_create() ok  MsgId:65538
[sdevice_not_work_set_callback]dbg: set ok! have 1 cb
[sdevice_can_work_set_callback]dbg: set ok! have 1 cb
init_log_module() ok
[sdevice_can_work_set_callback]dbg: set ok! have 2 cb
[exec-iCame,0144]msgSndId:0
[exec-iCame,0159]msgRcvId:32769
[timer,144]dbg: init complete.
[Func]:cmos_set_wdr_mode [Line]:743 [Info]:linear mode
random: crng init done
up
killall: wpa_supplicant: no process killed
killall: udhcpc: no process killed
killall: udhcpd: no process killed
killall: hostapd: no process killed
down
up
Successfully initialized wpa_supplicant
rfkill: Cannot open RFKILL control device
RTL871X: rtw_set_802_11_connect(wlan0)  fw_state=0x00000008
RTL871X: start auth
RTL871X: auth success, start assoc
RTL871X: assoc success
RTL871X: recv eapol packet
RTL871X: send eapol packet
RTL871X: recv eapol packet
RTL871X: send eapol packet
RTL871X: set pairwise key camid:4, addr:C8:94:F9:CD:71:49, kid:0, type:AES
RTL871X: set group key camid:5, addr:C8:94:F9:CD:71:49, kid:2, type:AES
udhcpc: started, v1.31.0
udhcpc: sending discover
udhcpc: sending select for 192.168.123.129
udhcpc: lease of 192.168.123.129 obtained, lease time 43200
deleting routers
adding dns 8.8.8.8
adding dns 8.8.4.4
killall: miio_client: no process killed
killall: miio_client_helper_nomqtt.sh: no process killed
killall: wifi_start.sh: no process killed
Jan  1 08:00:15 miio_client[1145]: [W] miio_client: version: miio-client 4.0.9 (main,230)
[Mi-helper] ln34: {"method":"_internal.helper_ready"}
Jan  1 08:00:15 miio_client[1146]: [W] internal: handle_internal_hello, fd: 7, STATE: (0) (handle_internal_hello,1292)
[Mi-helper] Got _internal.request_dinfo
[Mi-helper] ln303: {"method":"_internal.request_dinfo","params":"/etc/miio/"}
[Mi-helper] dinfo_file:    /etc/miio//device.conf
Jan  1 08:00:15 miio_client[1146]: [W] internal: cmd_internal_response_dinfo:1230 STATE: [STATE_DEVICE_INIT] -> [STATE_DIDKEY_DONE] (_set_conn_state,397)
Jan  1 08:00:15 miio_client[1146]: [W] internal: handle_internal_hello, fd: 8, STATE: (3) (handle_internal_hello,1292)
[Mi-helper] Got _internal.request_dtoken
[Mi-helper] dcountry_file: /etc/miio//device.country
[Mi-helper] ln311: {"method":"_internal.response_dcountry","params":""}
Jan  1 08:00:15 miio_client[1146]: [W] internal: cmd_internal_response_dtoken:911 STATE: [STATE_DIDKEY_DONE] -> [STATE_TOKEN_DONE] (_set_conn_state,397)
Jan  1 08:00:15 miio_client[1146]: [W] internal: handle_internal_hello, fd: 8, STATE: (4) (handle_internal_hello,1292)
[Mi-helper] Got _internal.req_wifi_conf_status
[Mi-helper] wificonf_file: /etc/miio//wifi.conf
[Mi-helper] WIFI_SSID: 
[Mi-helper] ln243: {"method":"_internal.res_wifi_conf_status","params":1}
Jan  1 08:00:15 miio_client[1146]: [W] internal: cmd_internal_res_wifi_conf_status:487 STATE: [STATE_TOKEN_DONE] -> [STATE_WIFI_STA_MODE] (_set_conn_state,397)
Jan  1 08:00:15 miio_client[1146]: [W] miio_client: miio_common init (main,284)
Jan  1 08:00:15 miio_client[1146]: [W] internal: handle_internal_hello, fd: 8, STATE: (6) (handle_internal_hello,1292)
[Mi-helper] ifname: wlan0
[Mi-helper] ssid:   Internet
[Mi-helper] bssid:  C8:94:F9:CD:71:49
[Mi-helper] ip:     192.168.123.129
[Mi-helper] mask:   255.255.255.0
[Mi-helper] gw:     192.168.123.1
OK
Jan  1 08:00:16 miio_client[1146]: [W] archnet: ip =, not valid (arch_net_is_offline,183)
[Mi-helper] ln238: {"method":"_internal.info","partner_id":"","params":{"hw_ver":"Linux","fw_ver":"4.0.9_0112","ap":{"ssid":"Internet","bssid":"C8:94:F9:CD:71:49","rssi":"-60"},"netif":{"localIp":"192.168.123.129","mask":"255.255.255.0","gw":"192.168.123.1"}}}
Jan  1 08:00:16 miio_client[1146]: [W] internal: no wifi state (cmd_internal_get_info_callback,2080)
Jan  1 08:00:16 miio_client[1146]: [W] internal: freq is not uint. (cmd_internal_get_info_callback,2170)
Jan  1 08:00:16 miio_client[1146]: [W] internal: cmd_internal_get_info_callback:2318 STATE: [STATE_WIFI_STA_MODE] -> [STATE_WIFI_STA_GOT_IP] (_set_conn_state,397)
Jan  1 08:00:16 miio_client[1146]: [W] internal: handle_internal_hello, fd: 8, STATE: (7) (handle_internal_hello,1292)
Jan  1 08:00:16 miio_client[1146]: [W] internal: handle_internal_hello:1365 STATE: [STATE_WIFI_STA_GOT_IP] -> [STATE_CLOUD_TRYING] (_set_conn_state,397)
Jan  1 08:00:17 miio_client[1146]: [W] arch_os: delete mutex handle = 587832 (arch_os_mutex_delete,484)
Jan  1 08:00:17 miio_client[1146]: [W] arch_os: delete mutex handle = 587688 (arch_os_mutex_delete,484)
Jan  1 08:00:17 miio_client[1146]: [W] arch_os: delete mutex handle = 587720 (arch_os_mutex_delete,484)
Jan  1 08:00:17 miio_client[1146]: [W] httpdns: "proto" not found! (http_in_close,235)
Jan  1 08:00:17 miio_client[1146]: [W] tls: timeout[100]! mbedtls_ssl_handshake returned -0x6800 (d0_tls_open,389)
Jan  1 08:00:17 miio_client[1146]: [W] tls: timeout[200]! mbedtls_ssl_handshake returned -0x6800 (d0_tls_open,389)
Jan  1 08:00:17 miio_client[1146]: [W] tls: timeout[300]! mbedtls_ssl_handshake returned -0x6800 (d0_tls_open,389)
Jan  1 08:00:18 miio_client[1146]: [W] tls: timeout[400]! mbedtls_ssl_handshake returned -0x6800 (d0_tls_open,389)
Jan  1 08:00:18 miio_client[1146]: [W] tls: timeout[500]! mbedtls_ssl_handshake returned -0x6800 (d0_tls_open,389)
Jan  1 08:00:18 miio_client[1146]: [W] tls: timeout[600]! mbedtls_ssl_handshake returned -0x6800 (d0_tls_open,389)
Jan  1 08:00:18 miio_client[1146]: [W] tls: timeout[700]! mbedtls_ssl_handshake returned -0x6800 (d0_tls_open,389)
Jan  1 08:00:20 miio_client[1146]: [W] miio_client_func: Got online msg. (miio_client_online_hook,73)
Jan  1 08:00:20 miio_client[1146]: [W] internal: miio_client_online_hook:75 STATE: [STATE_CLOUD_TRYING] -> [STATE_CLOUD_CONNECTED] (_set_conn_state,397)
[Mi-helper] ifname: wlan0
[Mi-helper] ssid:   Internet
[Mi-helper] bssid:  C8:94:F9:CD:71:49
[Mi-helper] ip:     192.168.123.129
[Mi-helper] mask:   255.255.255.0
[Mi-helper] gw:     192.168.123.1
OK
[Mi-helper] ln238: {"method":"_internal.info","partner_id":"","params":{"hw_ver":"Linux","fw_ver":"4.0.9_0112","ap":{"ssid":"Internet","bssid":"C8:94:F9:CD:71:49","rssi":"-60"},"netif":{"localIp":"192.168.123.129","mask":"255.255.255.0","gw":"192.168.123.1"}}}
Jan  1 08:00:24 miio_client[1146]: [W] internal: no wifi state (cmd_internal_get_info_callback,2080)
Jan  1 08:00:24 miio_client[1146]: [W] internal: freq is not uint. (cmd_internal_get_info_callback,2170)
Jan  1 08:00:24 miio_client[1146]: [W] internal: handle_internal_hello, fd: 8, STATE: (12) (handle_internal_hello,1292)
[assis]WDG_CMD_FEED_DOG!!!!
[assis]WDG_CMD_FEED_DOG!!!!
[assis]WDG_CMD_FEED_DOG!!!!
Sep 13 05:36:45 miio_client[1146]: [W] ot: up session[id=1599946600] timeout (ot_timer_up_session_timeout,952)
Sep 13 05:36:50 miio_client[1146]: [W] ot: up session[id=1599946606] timeout (ot_timer_up_session_timeout,952)
[assis]WDG_CMD_FEED_DOG!!!!
Sep 13 05:36:56 miio_client[1146]: [W] ot: up session[id=1599946612] timeout (ot_timer_up_session_timeout,952)
Sep 13 05:37:02 miio_client[1146]: [W] ots: kplv timeout. Cut. (ots_timer_kplv_timeout,705)
Sep 13 05:37:02 miio_client[1146]: [W] ot: up session[id=1599946618] flushed... (ot_up_rpc_delegate_flush,1245)
Sep 13 05:37:02 miio_client[1146]: [W] arch_os: delete mutex handle = 587688 (arch_os_mutex_delete,484)
Sep 13 05:37:02 miio_client[1146]: [W] arch_os: delete mutex handle = 587720 (arch_os_mutex_delete,484)
Sep 13 05:37:02 miio_client[1146]: [W] arch_os: delete mutex handle = 587752 (arch_os_mutex_delete,484)
Sep 13 05:37:02 miio_client[1146]: [W] ots: ots reconnect will start in 9457 ms... (ots_reconnect,1263)
Sep 13 05:37:02 miio_client[1146]: [W] miio_client_func: Got offline msg. (miio_client_offline_hook,90)
Sep 13 05:37:02 miio_client[1146]: [W] internal: miio_client_offline_hook:92 STATE: [STATE_CLOUD_CONNECTED] -> [STATE_CLOUD_CONNECT_RETRY] (_set_conn_state,397)
Sep 13 05:37:03 miio_client[1146]: [W] miio_net_analyse: OFFLINE reason 30 OT is nok 
 (_miio_offline_net_check,308)
Sep 13 05:37:04 miio_client[1146]: [W] miio_client_func: cloud socket not ready yet, current state: 14 (handle_report_msg,231)
Sep 13 05:37:12 miio_client[1146]: [W] tls: timeout[100]! mbedtls_ssl_handshake returned -0x6800 (d0_tls_open,389)
Sep 13 05:37:12 miio_client[1146]: [W] tls: timeout[200]! mbedtls_ssl_handshake returned -0x6800 (d0_tls_open,389)
Sep 13 05:37:12 miio_client[1146]: [W] tls: timeout[300]! mbedtls_ssl_handshake returned -0x6800 (d0_tls_open,389)
Sep 13 05:37:12 miio_client[1146]: [W] tls: timeout[400]! mbedtls_ssl_handshake returned -0x6800 (d0_tls_open,389)
Sep 13 05:37:12 miio_client[1146]: [W] tls: timeout[500]! mbedtls_ssl_handshake returned -0x6800 (d0_tls_open,389)
Sep 13 05:37:12 miio_client[1146]: [W] tls: timeout[600]! mbedtls_ssl_handshake returned -0x6800 (d0_tls_open,389)
Sep 13 05:37:13 miio_client[1146]: [W] tls: timeout[700]! mbedtls_ssl_handshake returned -0x6800 (d0_tls_open,389)
Sep 13 05:37:13 miio_client[1146]: [W] tls: timeout[800]! mbedtls_ssl_handshake returned -0x6800 (d0_tls_open,389)
Sep 13 05:37:14 miio_client[1146]: [W] miio_client_func: Got online msg. (miio_client_online_hook,73)
Sep 13 05:37:14 miio_client[1146]: [W] internal: miio_client_online_hook:75 STATE: [STATE_CLOUD_CONNECT_RETRY] -> [STATE_CLOUD_CONNECTED] (_set_conn_state,397)
[Mi-helper] ifname: wlan0
[Mi-helper] ssid:   Internet
[Mi-helper] bssid:  C8:94:F9:CD:71:49
[Mi-helper] ip:     192.168.123.129
[Mi-helper] mask:   255.255.255.0
[Mi-helper] gw:     192.168.123.1
OK
[Mi-helper] ln238: {"method":"_internal.info","partner_id":"","params":{"hw_ver":"Linux","fw_ver":"4.0.9_0112","ap":{"ssid":"Internet","bssid":"C8:94:F9:CD:71:49","rssi":"-60"},"netif":{"localIp":"192.168.123.129","mask":"255.255.255.0","gw":"192.168.123.1"}}}
Sep 13 05:37:16 miio_client[1146]: [W] internal: no wifi state (cmd_internal_get_info_callback,2080)
Sep 13 05:37:16 miio_client[1146]: [W] internal: freq is not uint. (cmd_internal_get_info_callback,2170)
Sep 13 05:37:16 miio_client[1146]: [W] internal: handle_internal_hello, fd: 8, STATE: (12) (handle_internal_hello,1292)
[assis]WDG_CMD_FEED_DOG!!!!
[assis]WDG_CMD_FEED_DOG!!!!

Add Wireguard to the build: not working?

Hello, I tried to enable Wireguard in the build and although it builds OK and I can generate keys with the wg command, when I tried to load the kernel module with "insmod wireguard.ko", I get:

insmod: can't insert 'wireguard.ko': unknown symbol in module, or unknown parameter

And from dmesg:

<4>wireguard: Unknown symbol ip_tunnel_get_stats64 (err 0)

Is it possible to make this work? TIA

Job

Hello, I need to insert my logo on a camera based on HI3516CV300 IMX307 keeping the original firmware. Firmware 3516CV300_IMX307_B1T0A1M0C1P1_W_20.1.3.2
You do?
What the value ?
Thank you

wrong kernel version

unknown_unknown_hi3516av100_unknown_defconfig
BR2_DEFAULT_KERNEL_VERSION="3.4.35"

ssqvision_on290h16d_hi3516dv100_imx290_defconfig
BR2_DEFAULT_KERNEL_VERSION="3.4.35"

unknown_unknown_hi3516dv100_unknown_defconfig
BR2_DEFAULT_KERNEL_VERSION="3.4.35"

or

xm_ipg-83h50p-b_hi3516av100_imx178_defconfig
BR2_DEFAULT_KERNEL_VERSION="4.9.37"

xm_83h40pl-b_hi3516dv100_ov4689_defconfig
BR2_DEFAULT_KERNEL_VERSION="4.9.37"

Which ipcam to get started?

Hello!
Im interested in this project and want to try it out.
I already own a Hi3516CV300 variant, but i don't think that this variant will have the best compatibility as i can see on the old kernel versions.

Can you recommend me some ip cams to get started?

AK39XXEV300

I'm trying to backup oryginal firmware from my IP camera. I would like to configure it to work with some open source projects like Kerberos. RTSP and ONVIF is disabled by default. Web interface is handcaped too. I decieded connect to it by telnet, but any password is incorrect.

This is my logs when I am connected to TTL debug port using only ground and TX pin:

U-Boot 2013.10.0-AK_V3.1.00 (May 20 2020 - 04:47:31)

ramsize: 04000000
DRAM: 64 MiB
efuse_read:0x00000002
8 MiB
should_load_env
cdh:env_relocate_spec, line:564
load env_relocate

total partitions: 8
In: serial
Out: serial
Err: serial
Net: AKEthernet-0

device nor0 <spi0.0>, # parts = 8
#: name size offset mask_flags
0: UBOOT 0x0002e000 0x00000000 0
1: ENV 0x00001000 0x0002e000 0
2: BKENV 0x00001000 0x0002f000 0
3: DTB 0x00010000 0x00030000 0
4: KERNEL 0x001b0000 0x00040000 0
5: ROOTFS 0x000c0000 0x001f0000 0
6: APP 0x004d0000 0x002b0000 0
7: CONFIG 0x00080000 0x00780000 0

active partition: nor0,0 - (UBOOT) 0x0002e000 @ 0x00000000

KERNEL: size:0x001b0000, offset:0x00040000

SF: 1769472 bytes @ 0x40000 Read: OK

Booting kernel from Legacy Image at 80008000 ...

Image Name: Linux-4.4.192V1.6
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1605864 Bytes = 1.5 MiB
Load Address: 80008000
Entry Point: 80008040
Verifying Checksum ... OK
XIP Kernel Image ... OK
kernel loaded at 0x80008000, end = 0x801900e8
using: FDT

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 4.4.192V1.6 (root@ubuntu) (gcc version 4.9.4 (Buildroot 2018.02.7-g7ef6f7c) ) #16 Fri Ma0
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
CPU: VIVT data cache, VIVT instruction cache
Machine model: ak3919ev300_v601_f37 dev board
Memory policy: Data cache writeback
ANYKA CPU AK39XXEV330 (ID 0x20160101)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttySAK0,115200n8 root=/dev/mtdblock5 rootfstype=squashfs init=/sbin/init M
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 33464K/65536K available (3154K kernel code, 117K rwdata, 988K rodata, 136K init, 188K bss, 320)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc4800000 - 0xff800000 ( 944 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0413d44 (4144 kB)
.init : 0xc0414000 - 0xc0436000 ( 136 kB)
.data : 0xc0436000 - 0xc0453788 ( 118 kB)
.bss : 0xc0453788 - 0xc0482878 ( 189 kB)
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:126
ak39ev330_clk: CPU(JCLK): 804(Mhz)
ak39ev330_clk: MEMDDR2(DPHY): 402(Mhz)
ak39ev330_clk: VCLK: 280(Mhz)
ak-timer: ak_timer_init
clocksource: ak_cs_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 159271703898 ns
sched_clock: 32 bits at 12MHz, resolution 83ns, wraps every 178956970966ns
Calibrating delay loop... 400.58 BogoMIPS (lpj=2002944)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x80008400 - 0x8000843c
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
On-chip L2 memory initialized
ak-pinctrl 20170000.gpio: ak_pinctrl_probe 1962
ak_ev330_pinctrl: ak_pinctrl_probe irq: 15
media: Linux media interface: v0.10
Linux video capture interface: v2.00
clocksource: Switched to clocksource ak_cs_timer
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. © 2001-2006 Red Hat, Inc.
io scheduler noop registered (default)
AKxx uart driver init, (c) 2013 ANYKA
ttySAK0 at MMIO 0x20130000 (irq = 10, base_baud = 0) is a AK
console [ttySAK0] enabled
loop: module loaded
Start to init Anyka SPI Flash...
init Anyka SPI Nand Flash driver
value:0
spi0 new hz is 35000000, div is 2(change).
ak spiflash probe enter.
akspi flash ID: 0x00c22017
ak-spiflash spi0.0: kh25l64 (8192 Kbytes)
8 cmdlinepart partitions found on MTD device spi0.0
Creating 8 MTD partitions on "spi0.0":
0x000000000000-0x00000002e000 : "UBOOT"
0x00000002e000-0x00000002f000 : "ENV"
0x00000002f000-0x000000030000 : "BKENV"
0x000000030000-0x000000040000 : "DTB"
0x000000040000-0x0000001f0000 : "KERNEL"
0x0000001f0000-0x0000002b0000 : "ROOTFS"
0x0000002b0000-0x000000780000 : "APP"
0x000000780000-0x000000800000 : "CONFIG"
Init AK SPI Flash finish.
akspi master SPI0 initialize success, use for PIO mode.
i2c /dev entries driver
ak_wdt_init: watchdog register...
NET: Registered protocol family 17
sctp: Hash tables configured (established 512 bind 1024)
^@VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
devtmpfs: mounted
Freeing unused kernel memory: 136K
starting pid 300, tty '': '/etc/init.d/rcS'
^@mount all file system...

Love Linux ! ! !

/bin/mount -t squashfs /dev/mtdblock6 /usr
/bin/mount -t jffs2 /dev/mtdblock7 /etc/jffs2
starting mdev...
starting pid 328, tty '/dev/ttySAK0': '/sbin/getty -L ttySAK0 115200 vt100 '
^@start telnet......
__
_ ____ / ____ __
/\ | \ | |\ \ / /| |/ / /\
/ \ | | | \ / / | ' / / \
/ /\ \ | . ' | \ / | < / /\ \
/ ____ \ | |\ | | | | . \ / ____ \
// _|| _| |__| ||_// _\

ifconfig: SIOCGIFFLAGS: No such device
wifi power down

anyka login: insmod: can't insert '/usr/modules/ak_rtc.ko': No such file or directory
hwclock: can't open '/dev/misc/rtc': No such file or directory
ak_uio: register uio device successfully with irq: 2!
enter gpio_uart_probe
ak_mac Ethernet Driver
Configed MAC RMII interface!
insmod mac device ok
Reset MAC controller!
eth0 owns a shared interrupt on netdev->irq 16
setting up the cable unplug timer
start nfs driver...
start sensor driver...
akisp_init, cb0:c30c8078, cb1: (null)
jxfxx_probe Apr 26 2020 22:09:57
i2c i2c-0: jxfxx Probed success, subdev:c3162e14
start sar-adc driver...
TIMETICK->[APIS_Timer/src//Timetick.c]:212 task list is empty
TIMETICK->[APIS_Timer/src//Timetick.c]:113 TIMETICK pid=453 tid=b6b1d4c0 begin

When I use 3 wires (GND, RX, TX) there is such a different output:

[+��env_relocate

total partitions: 8
In: serial
Out: serial
Err: serial
Net: AKEthernet-0

device nor0 <spi0.0>, # parts = 8
#: name size offset mask_flags
0: UBOOT 0x0002e000 0x00000000 0
1: ENV 0x00001000 0x0002e000 0
2: BKENV 0x00001000 0x0002f000 0
3: DTB 0x00010000 0x00030000 0
4: KERNEL 0x001b0000 0x00040000 0
5: ROOTFS 0x000c0000 0x001f0000 0
6: APP 0x004d0000 0x002b0000 0
7: CONFIG 0x00080000 0x00780000 0

active partition: nor0,0 - (UBOOT) 0x0002e000 @ 0x00000000

KERNEL: size:0x001b0000, offset:0x00040000
� 1769472 bytes @ 0x40000 Read: OK

Booting kernel from Legacy Image at 80008000 ...

Image Name: Linux-4.4.192V1.6
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1605864 Bytes = 1.5 MiB
Load Address: 80008000
Entry Point: 80008040
Verifying Checksum ... OK
XIOK
kernel loaded at 0x80008000, end = 0x801900e8
using: FDT

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 4.4.192V1.6 (root@ubuntu) (gcc version 4.9.4 (Buildroot 2018.02.7-g7ef6f7c) ) #16 Fri Ma0
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
CPU: VIVT data cache, VIVT instruction cache
Machine model: ak3919ev300_v601_f37 dev board
Memory policy: Data cache writeback
ANYKA CPU AK39XXEV330 (ID 0x20160101)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: console=ttySAK0,115200n8 root=/dev/mtdblock5 rootfstype=squashfs init=/sbin/init M
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 33464K/65536K available (3154K kernel code, 117K rwdata, 988K rodata, 136K init, 188K bss, 320)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc4800000 - 0xff800000 ( 944 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0413d44 (4144 kB)
.init : 0xc0414000 - 0xc0436000 ( 136 kB)
.data : 0xc0436000 - 0xc0453788 ( 118 kB)
.bss : 0xc0453788 - 0xc0482878 ( 189 kB)
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:126
ak39ev330_clk: CPU(JCLK): 804(Mhz)
ak39ev330_clk: MEMDDR2(DPHY): 402(Mhz)
ak39ev330_clk: VCLK: 280(Mhz)
ak-timer: ak_timer_init
clocksource: ak_cs_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 159271703898 ns
sched_clock: 32 bits at 12MHz, resolution 83ns, wraps every 178956970966ns
Calibrating delay loop... 400.58 BogoMIPS (lpj=2002944)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x80008400 - 0x8000843c
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
On-chip L2 memory initialized
ak-pinctrl 20170000.gpio: ak_pinctrl_probe 1962
ak_ev330_pinctrl: ak_pinctrl_probe irq: 15
media: Linux media interface: v0.10
Linux video capture interface: v2.00
clocksource: Switched to clocksource ak_cs_timer
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. © 2001-2006 Red Hat, Inc.
io scheduler noop registered (default)
AKxx uart driver init, (c) 2013 ANYKA
ttySAK0 at MMIO 0x20130000 (irq = 10, base_baud = 0) is a AK
console [ttySAK0] enabled
loop: module loaded
Start to init Anyka SPI Flash...
init Anyka SPI Nand Flash driver
value:0
spi0 new hz is 35000000, div is 2(change).
ak spiflash probe enter.
akspi flash ID: 0x00c22017
ak-spiflash spi0.0: kh25l64 (8192 Kbytes)
8 cmdlinepart partitions found on MTD device spi0.0
Creating 8 MTD partitions on "spi0.0":
0x000000000000-0x00000002e000 : "UBOOT"
0x00000002e000-0x00000002f000 : "ENV"
0x00000002f000-0x000000030000 : "BKENV"
0x000000030000-0x000000040000 : "DTB"
0x000000040000-0x0000001f0000 : "KERNEL"
0x0000001f0000-0x0000002b0000 : "ROOTFS"
0x0000002b0000-0x000000780000 : "APP"
0x000000780000-0x000000800000 : "CONFIG"
Init AK SPI Flash finish.
akspi master SPI0 initialize success, use for PIO mode.
i2c /dev entries driver
ak_wdt_init: watchdog register...
NET: Registered protocol family 17
sctp: Hash tables configured (established 512 bind 1024)
VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
devtmpfs: mounted
Freeing unused kernel memory: 136K
ak_uio: register uio device successfully with irq: 2!
enter gpio_uart_probe
ak_mac Ethernet Driver
Configed MAC RMII interface!
insmod mac device ok
Reset MAC controller!
eth0 owns a shared interrupt on netdev->irq 16
setting up the cable unplug timer
akisp_init, cb0:c30f9078, cb1: (null)
jxfxx_probe Apr 26 2020 22:09:57
i2c i2c-0: jxfxx Probed success, subdev:c321de14

anyka login: TIMETICK->[APIS_Timer/src//Timetick.c]:212 task list is empty
TIMETICK->[APIS_Timer/src//Timetick.c]:113 TIMETICK pid=453 tid=b6b354c0 begin

In both cases I cannot write anything. Ctrl+C is equally ineffective. Please help me get this started. With pleasure I add my firmware to your base.

rtl8188eu kernel module build error

rtl8188eu 4b0ecca485b9f11f58670b69aa9f90ecad7da02f Building kernel module

br-hisicam/output/xm_ivg-hp203y-se_hi3516cv300_imx291/build/rtl8188eu-4b0ecca485b9f11f58670b69aa9f90ecad7da02f/./os_dep/ioctl_linux.c:7815:3: error: ‘struct iw_handler_def’ has no member named ‘private_args’

Default ip settings for eth0

In case when we are booting kernel without ip settings, there should be some default eth0 interface definition.

Sample user hello world application build

Some users want to add some their software to target, but don`t have enough experience with cross compilation and buildroot. Some sample hello world external application needed that will be putted automatically to rootfs.

Build failed in ubuntu:eoan

  • ubuntu:eoan
  • make xm_ivg-hp201y-se_hi3516cv300_imx323_defconfig
LN include/sys/user.h
  LN include/bits/posix_opt.h
  LN include/bits/local_lim.h
  MKDIR libm/arm
  HOSTCC /extra/locale/gen_wc8bit
  GEN /extra/locale/codesets.txt
  GEN /extra/locale/c8tables.h
make[4]: *** [Makefile.in:164: ../..//extra/locale/c8tables.h] Error 1
make[3]: *** [Makefile.in:185: headers] Error 2
make[2]: *** [package/pkg-generic.mk:269: /br-hisicam/output/xm_ivg-hp201y-se_hi3516cv300_imx323/build/uclibc-1.0.32/.stamp_built] Error 2
make[1]: *** [Makefile:23: _all] Error 2
make[1]: Leaving directory '/br-hisicam/output/xm_ivg-hp201y-se_hi3516cv300_imx323'
make: *** [Makefile:39: xm_ivg-hp201y-se_hi3516cv300_imx323_defconfig] Error 2

P.S.
Seems it is becasue BR2_TOOLCHAIN_BUILDROOT_LOCALE=y in defconfig, as
unknown_unknown_xm530_unknown builds ok.

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.