Inspired by https://gist.github.com/superjamie/ac55b6d2c080582a3e64

Follow instruction on the net to setup a RPi and attach it to your network using WIFI and ethernet. One card for VPN and one for SSH access.

Ex (my setup): eth0 - 192.168.0.60 wlan0 - 192.168.0.61

config files and source code need to be modified to match your network setup.

Copy the files and folders from server into the /home/pi/vpn.tv/ folder on your RPi.

vpn.tv
├── config/
├── flags/
├── geo/
├── vpn.jinja2
└── vpn.py

Install geoip2 (easy_install geoip2)

Install PIL (easy_install Pillow) (you may need to install python-dev as well sudo apt-get install python-dev)

Run the command below to fetch the GeoLite country database. You should run it via cron at regular intervals (once a week is more then enough) to get the latest database.

wget -qO- http://geolite.maxmind.com/download/geoip/database/GeoLite2-Country.tar.gz | tar xvz -C /home/pi/vpn.tv/geo/ --strip 1

Copy the vpn_admin.service to /lib/systemd/system/ and run

sudo systemctl enable vpn_admin
sudo systemctl start vpn_admin

for testing/debuging you can run python /home/pi/vpn.tv/vpn.py instead of starting the service.

sudo apt-get install openvpn
sudo systemctl enable openvpn

No configuration files needed at this point. The VPN will not do anythng yet.

echo -e '\n#Enable IP Routing\nnet.ipv4.ip_forward = 1' | sudo tee -a /etc/sysctl.conf
sudo sysctl -p

sudo iptables -t nat -A POSTROUTING -o tun0 -j MASQUERADE
sudo iptables -A FORWARD -i tun0 -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT
sudo iptables -A FORWARD -i eth0 -o tun0 ! -d 192.168.0.0/16 -j ACCEPT
sudo iptables -A FORWARD -i eth0 -o tun0 ! -d 127.0.0.1 -j ACCEPT

sudo apt-get install iptables-persistent
sudo netfilter-persistent save
sudo systemctl enable netfilter-persistent

Sign up for a VPN service that supports OpenVPN (eg: vpnunlimitedapp.com), download the configuration files and add them config folder (copied from github) with .conf extention. Give them meaningful names (eg: UK -iPlayer.conf).

Manually config your AppleTV network to point the router IP to the RPi IP (192.168.0.60)

Using your own Apple Developer ID compile/sign/install the tvOS app on your AppleTV to be able to control the VPN. A "legacy" web interface is available as well and it can be accessed from your browser on a computer or mobile device. Just go to http://192.168.0.60

The menu is formed by the names of the OpenVPN config files on the RPi (reason why they should have meaningful names).

• The flag represents the county that the remote IP belongs to.
• If the config says one country but the flag shows the country where you currently are, the VPN is NOT working.
• Selecting an already selected config, would perform a OpenVPN service restart

Accepting beer tips...