Support for Keyboardio Atreus about miryoku HOT 11 CLOSED

The advice from @smoralesd is good. In particular you need to make the config.h based on .../keyboards/keyboardio/atreus/atreus.h in the same way as the subset mapping for the original atreus is based on the corresponding atreus.h.

from miryoku.

I got it to work. Here is my config.h:

// generated from users/manna-harbour_miryoku/miryoku.org  -*- buffer-read-only: t -*-

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
  K00, K01, K02, K03, K04,               K05, K06, K07, K08, K09,\
  K10, K11, K12, K13, K14,               K15, K16, K17, K18, K19,\
  K20, K21, K22, K23, K24,               K25, K26, K27, K28, K29,\
  N30, N31, K32, K33, K34,               K35, K36, K37, N38, N39)\
LAYOUT(\
  K00, K01, K02, K03, K04,               K05, K06, K07, K08, K09,\
  K10, K11, K12, K13, K14,               K15, K16, K17, K18, K19,\
  K20, K21, K22, K23, K24, XXX,     XXX, K25, K26, K27, K28, K29,\
  XXX, XXX, XXX, K32, K33, K34,     K35, K36, K37, XXX, XXX, XXX)

To flash the keyboard on Windows, I followed the instructions for the original Atreus and used avrdudess, getting into bootloader mode by plugging in the cable while holding the Escape key.

Some more questions:

• I did not change the .org file but directly created the files for the Keyboardio Atreus. However, I understand that they are typically generated from the .org file. How do you do that?
• What's the best way to make some (non-trivial) changes to the Miryoku keymap? For example, I want to reuse some unused keys (leader key), change the order of thumb keys, and put the numbers layer on the right hand. So far, I have just changed the Miryoku keymap directly, but it's not a long-term solution.

from miryoku.

My first question: It doesn't seem like there's already a layout (under layouts/default or layouts/community) for the Keyboardio Atreus. Would it be a good start to add one?

from miryoku.

If I don't add the layouts feature support for the Keyboardio Atreus, can I just copy keyboards/atreus/keymaps/manna-harbour_miryoku to keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku? Or am I missing any additional steps?

from miryoku.

Hi @Shredder, not an expert here but I'm trying to add support for a Dactyl Manuform 5x6 so I guess I could share what I have done up to this point.

1. I went through this steps to setup my dev environment: https://docs.qmk.fm/#/newbs_getting_started
2. Then I check the commit history on this repo, found a commit that added support for a Dactyl Manuform 4x5 here. It's a similar keyboard which already exist, so, similar scenario and my guess is I should be able to replicate what was done for the 4x5 to add the 5x6
3. I created this commit on my fork (still WIP). I'm getting some errors I shared on issue 14 on this same repo.

I think you are right about adding the new files under keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku.

Hope you can make it work.

from miryoku.

I'm happy to add support but it might take me a week or so to get to it at the moment.

from miryoku.

Great! I'll incorporate it into the org file and add it to the development branch.

I recently added a customisation example to the docs so you might like to have a look at that. If you need a right hand numpad it'd be best to swap all the sub-layers to the opposite hand. I'll be making a testing version of that layout soon.

from miryoku.

My first question: It doesn't seem like there's already a layout (under layouts/default or layouts/community) for the Keyboardio Atreus. Would it be a good start to add one?

The community layouts feature is for where multiple different keyboard share the same layout. There are many variants of the atreus layout but I don't think there are other keyboards using the atreus44 layout in particular. Anyway, it you'd like to add a new community layout it has to go through a QMK PR.

from miryoku.

Great! I'll incorporate it into the org file and add it to the development branch.

I have the commit ready. I'll add you as co-author, but it'll expose your email address more than github would otherwise. Please let me know if that's fine or not.

from miryoku.

• I did not change the .org file but directly created the files for the Keyboardio Atreus. However, I understand that they are typically generated from the .org file. How do you do that?

You need emacs and need to enable python for org-babel, then run the command at the top of the file (after adding it to the file in the same way as the others). If you're interested in doing that and creating a PR directly that's great too, otherwise let me know about the co-author issue and I'll use the commit I've already prepared.

from miryoku.

Added now. You'll need to merge with QMK master to use. Thanks!

from miryoku.