Implement Auto Shift via Tap Hold about miryoku HOT 6 OPEN

what is autoshift used for in this layout? looking at the settings it is disable for symbols and letters.

It's used as an alternative to shift on the Num layer. It's disabled for alphas as it's not compatible with mod tap without Retro Shift, so it would only work on some alphas. See:

• https://github.com/manna-harbour/miryoku_qmk/blob/f5c215eff82c916cc040ea884f2ec37d2a3336fc/users/manna-harbour_miryoku/config.h#L19

• miryoku/docs/reference/readme.org

  Line 34 in e2fec02

  - Auto Shift for numbers and symbols.

from miryoku.

For ZMK it can be implemented with a macro and a custom hold tap behaviour, see https://github.com/serebrov/zmk-config/blob/master/config/microdox.keymap#L23-L36.

For KMonad this was already in the proof of concept implementation.

from miryoku.

what is autoshift used for in this layout?
looking at the settings it is disable for symbols and letters.

from miryoku.

Hi, everyone! I recently enabled auto-shift on my kb. That works fine except for the copy - paste commands where instead of LGUI+C, what is sent is LGUI+SHIFT+C if I accidentally hold it for longer.

Is it possible to prevent the hold-tap behavior altogether when LGUI is pressed before?

from miryoku.

@Vasilis I won't be enabling it for alphas as it won't work where there is mod tap. Do you get accidental shifts in normal typing? You could try combining with mod morph, create a new tap hold behaviour, increase the timeout, use quick snappy taps, or use the clipboard keys on the Nav layer.

from miryoku.

Thanks for following up. I am tracking the issue here.

from miryoku.