Can not jailbreak my iphone 7 plus on 13.4.1 using checkra1n version 0.10.1 everytime it shows error 77 and device booted in normal mode

Every time I jailbreak I get USB error (-77) but the jailbreak completes successfully. It is quite annoying but at least it works. People have been having mixed issues though. There are some people that get this error and have it not work at all. Matter of fact, bootra1n didn't work until I tried to jailbreak my iPad, then would it accept my iPhone. It is all about trial and error people!.

It worked before and I tried multiple times now, no checkra1n app. It jailbreaks fine though.
I also tried Safe Mode already.

iPhone SE on 13.3. I am trying to restore rootFS to upgrade iOS.

since it has been downloaded too many times, i can't download the iso anymore

Thank you for making bootra1n. Even though I already have linux, it's nice to have a backup (since I break my setup a lot). Windows users who have never heard of linux most likely were saved, by the simplicity this tool offers. <3

Yes, A7 isn't fixed..........

Everybody says unplug and plug device on right before trigger step. ok i did then checkra1n boots my device and said usb error -77 then I tried usb safe mod then i did again all step and said error -63 this time. God damn i wanna jailbreak my deviceeee.....

does not progress after here
also did not work in ram mode
Device: 5s
12.4.5
help me please

hi.
can you update your project?
https://t.co/lZRIDrfUNE?amp=1

Hi, i cannot jailbreak.
iphone 5s
ios: 12.4.6

it appeared: checkra1n: 2032 blocked for more than 122 seconds

How to fix it?
Better using ubuntu? Linux?

when i asked about jailbrake some people told me that jailbreaking my iphone will disable sim card
so i cannot recive calls or ill get no sim card message
im using iphone 5s running ios 12.4.5

What's this error? Yet the jailbreak does it correctly , this doesn't happen when I run the tool in ram mode

I can only get the usb to boot when turning off secure boot. With secure boot on(default), a pcie memory check screen pops up and finishes with “no bootable drive” or something like that.
Is there a way to get this working without first having to turn off secure boot? Thanks

I tried both shutdown and restart but when I click - it is replaced by / and doesn't works

i didn't get the file
the zip inside it are boot, liveOS and [BOOT]
Please help I want to jailbreak my iphone!!!

Please update bootra1n for 13.4

When I try to bootra1n on Apple TV 4 an error sometimes occurs -78 other times -63 what should I do?

the device is not accepting address 14 error -71. sometimes it shows address 14.
it happens while I was doing iPad mini 4 13.4.1

Hi! i want to boot it with grub4dos. but have not yet found a working solution.
can someone help me there?

title Bypass
kernel /boot/vmlinuz root=live:CDLABEL=USB init=/sbin/init ro rd.luks=0 rd.md=0 rd.dm=0 loglevel=4 vconsole.unicode=1 vconsole.keymap=us locale.LANG=en_US.UTF-8 rd.live.overlay.overlayfs=1
initrd /boot/initrd

i have copy the "LiveOS" & "boot" to the root of usb stick.

Hi @foxlet ! First of all, thanks for your tool (bootra1n).
Second, many people are getting error 71 while using bootra1n.
#6
#8

This is the definitive solution:
https://urukrama.wordpress.com/2009/01/27/usb-drive-not-recognised-error-71/
We could solve just adding the following line to "/etc/modprobe.d/options:"
options usbcore use_both_schemes=y
Could you apply this fix on the linux kernel of next versions of bootra1n? please

Idk what to do.. pls help

Finally, it's released!
https://checkra.in/linux
https://checkra.in/releases/0.10.1-beta
@foxlet

Can you add a way to add an option to boot into android from this, great work btw, just this one thing puts me off

Error code -79
Even after enabling safe mode

I get this error after trying to boot. Tried USB and UEFI. I"ve also tried the ACPI Error step in readme. I have the newest version of Bootra1n. I have a 64 bit Intel PC

[ 198.345731] usb 2-1: device not accepting address 7, error -71
[ 195

.953735] usb 2-1: device not accepting address 8, error -71

Hi, I used bootra1n to unlock icloud of an iphone 7,it would seem that everything went well,in fact I did not receive errors but when I turned on the phone the icloud still asked me for email and password.
How i can solve it? Thanks.

when i used etcher to write the ISO to the drive i try and boot but it just glitches out and sends me to windows even after selecting to boot into the USB thumbstick

I keep seeing everyone say to use rufus, but what configurations do we use?

I know to use default partition scheme and BIOS

but what about "Format Options", like file system and cluster size

I first tried with Fat32 filesystem with default 32 kilobytes cluster size.

Gave me error for "incorrect cluster size" or something.

So Im trying NTFS with default 4096 bytes and will edit with results:

It shows the bar after my phone goes into DFU mode and gets stuck there for 10-15 minutes. My phone boots up after that with no BootRa1n. I have an iPhone 7 running IOS 13.3.1

0.9.8 version is not working on A7 devices. Please add iso for 0.9.7.

Hey, could you please add the option:
Boot (graphics safe mode)
When running bootra1n x64 on my pc, the graphics are all messed up and the command line is unreadable. I had the same issue with an ubuntu live usb, and when selecting graphics safe mode, the issue stopped.

unit has no password still errro -77 tried on 2 units

Pls Need Help ERROR : USBMUX
jailbreak iPad Mini 4 i try anything but didnt work

Because the version 0.9.8 ++ was not support for iPhone 5s or 6

First, please add the libhooker bootstrap.
Second, please add support for project sandcastle

Is it possible to add Orca screen reader be added to this, this will greatly help blind users to jailbreak their device independently. I have done some limited search and Orca is indeed available for voidlinux.

hello, did some testing out of boredom recently and decided to see if bootra1n worked on a DVD since my multiboot USB was having issues (YUMI + bootra1n = not work, at least in GRUB unlisted)

surprisingly enough, it worked on my ATV4 (although giving error -77. didn't really matter since it still did the jailbreak just fine). i don't have other devices to test with, but from what i can tell, bootra1n works on DVD. it may also work on CD but i haven't tested that.

figured it'd be nice to have this known, even if no one really uses boot CDs/DVDs much anymore

I did everything but it came back with error code -78 until I restarted my windows pc to relaunch checkra1n. Once I did that it ran perfectly but the problem now is that checkra1n seems to not have installed. It’s no where on my screen and it says “All Done” on my PC.

This would avoid the need to use sudo, making things even simpler for the user

Is there anyway that I can boot this program as pre-dfu moded status or no home button being required pls help me

I booted into bootra1n and entered “anon” then “voidlinux” as password but it says Login incorrect can you help me

How to make work on the iPhone 5s?

that one file that i saw in the vid of TheTech Spot was not in the zip file i downloaded and i dont known what to do now cuz i need to jail break my phone

can anyone make a post on here with the file so i can download it from here

please see the video I tried different PCs, different USBs, different images, disabled Secure and Fast Boot