Comments (4)
cp2004
commented on July 23, 2024
Does this data show up in an M503 command? Currently, pretty much everything that is included with this plugin is parsed out of that command and I would like to avoid a sending a whole list of commands if I can.
If you can post the full M503 response that would be great so I can have a copy to test against, but I will also say I have not got any time to add this for the coming 2 months, but after that I may be able to look at it.
from octoprint-eeprom-marlin.
skl111
commented on July 23, 2024
Yes it does. m569 near the bottom
Send: M503
Recv: echo:; Linear Units:
Recv: echo: G21 ; (mm)
Recv: echo:; Temperature Units:
Recv: echo: M149 C ; Units in Celsius
Recv: echo:; Filament settings (Disabled):
Recv: echo: M200 S0 D1.75
Recv: echo:; Steps per unit:
Recv: echo: M92 X80.00 Y80.00 Z800.00 E142.00
Recv: echo:; Max feedrates (units/s):
Recv: echo: M203 X500.00 Y500.00 Z10.00 E50.00
Recv: echo:; Max Acceleration (units/s2):
Recv: echo: M201 X500.00 Y500.00 Z100.00 E5000.00
Recv: echo:; Acceleration (units/s2) (P<print-accel> R<retract-accel> T<travel-accel>):
Recv: echo: M204 P500.00 R1000.00 T500.00
Recv: echo:; Advanced (B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>):
Recv: echo: M205 B20000.00 S0.00 T0.00 J0.08
Recv: echo:; Home offset:
Recv: echo: M206 X0.00 Y0.00 Z0.00
Recv: echo:; Auto Bed Leveling:
Recv: echo: M420 S0 Z10.00 ; Leveling OFF
Recv: echo: G29 W I0 J0 Z0.06125
Recv: echo: G29 W I1 J0 Z0.10650
Recv: echo: G29 W I2 J0 Z0.11625
Recv: echo: G29 W I3 J0 Z0.10900
Recv: echo: G29 W I4 J0 Z0.10475
Recv: echo: G29 W I5 J0 Z0.08525
Recv: echo: G29 W I6 J0 Z0.08900
Recv: echo: G29 W I7 J0 Z0.09250
Recv: echo: G29 W I8 J0 Z0.04875
Recv: echo: G29 W I0 J1 Z0.03400
Recv: echo: G29 W I1 J1 Z0.07400
Recv: echo: G29 W I2 J1 Z0.06600
Recv: echo: G29 W I3 J1 Z0.08775
Recv: echo: G29 W I4 J1 Z0.09000
Recv: echo: G29 W I5 J1 Z0.08750
Recv: echo: G29 W I6 J1 Z0.07875
Recv: echo: G29 W I7 J1 Z0.06400
Recv: echo: G29 W I8 J1 Z0.03725
Recv: echo: G29 W I0 J2 Z0.01625
Recv: echo: G29 W I1 J2 Z0.05625
Recv: echo: G29 W I2 J2 Z0.05750
Recv: echo: G29 W I3 J2 Z0.05375
Recv: echo: G29 W I4 J2 Z0.07375
Recv: echo: G29 W I5 J2 Z0.06850
Recv: echo: G29 W I6 J2 Z0.06625
Recv: echo: G29 W I7 J2 Z0.05875
Recv: echo: G29 W I8 J2 Z0.00200
Recv: echo: G29 W I0 J3 Z0.01125
Recv: echo: G29 W I1 J3 Z0.06775
Recv: echo: G29 W I2 J3 Z0.06000
Recv: echo: G29 W I3 J3 Z0.06125
Recv: echo: G29 W I4 J3 Z0.08150
Recv: echo: G29 W I5 J3 Z0.04125
Recv: echo: G29 W I6 J3 Z0.05475
Recv: echo: G29 W I7 J3 Z0.02125
Recv: echo: G29 W I8 J3 Z-0.00600
Recv: echo: G29 W I0 J4 Z0.01000
Recv: echo: G29 W I1 J4 Z0.05250
Recv: echo: G29 W I2 J4 Z0.08025
Recv: echo: G29 W I3 J4 Z0.08225
Recv: echo: G29 W I4 J4 Z0.06500
Recv: echo: G29 W I5 J4 Z0.04475
Recv: echo: G29 W I6 J4 Z0.03000
Recv: echo: G29 W I7 J4 Z0.01775
Recv: echo: G29 W I8 J4 Z-0.02625
Recv: echo: G29 W I0 J5 Z0.04650
Recv: echo: G29 W I1 J5 Z0.05000
Recv: echo: G29 W I2 J5 Z0.06975
Recv: echo: G29 W I3 J5 Z0.09150
Recv: echo: G29 W I4 J5 Z0.07000
Recv: echo: G29 W I5 J5 Z0.02500
Recv: echo: G29 W I6 J5 Z0.06375
Recv: echo: G29 W I7 J5 Z0.00875
Recv: echo: G29 W I8 J5 Z-0.03100
Recv: echo: G29 W I0 J6 Z0.02225
Recv: echo: G29 W I1 J6 Z0.06600
Recv: echo: G29 W I2 J6 Z0.09475
Recv: echo: G29 W I3 J6 Z0.08125
Recv: echo: G29 W I4 J6 Z0.05875
Recv: echo: G29 W I5 J6 Z0.04375
Recv: echo: G29 W I6 J6 Z0.04875
Recv: echo: G29 W I7 J6 Z0.01250
Recv: echo: G29 W I8 J6 Z-0.03000
Recv: echo: G29 W I0 J7 Z0.03275
Recv: echo: G29 W I1 J7 Z0.08150
Recv: echo: G29 W I2 J7 Z0.11150
Recv: echo: G29 W I3 J7 Z0.07100
Recv: echo: G29 W I4 J7 Z0.08750
Recv: echo: G29 W I5 J7 Z0.04850
Recv: echo: G29 W I6 J7 Z0.07025
Recv: echo: G29 W I7 J7 Z0.03625
Recv: echo: G29 W I8 J7 Z-0.02000
Recv: echo: G29 W I0 J8 Z0.06150
Recv: echo: G29 W I1 J8 Z0.12125
Recv: echo: G29 W I2 J8 Z0.13350
Recv: echo: G29 W I3 J8 Z0.11625
Recv: echo: G29 W I4 J8 Z0.10225
Recv: echo: G29 W I5 J8 Z0.07900
Recv: echo: G29 W I6 J8 Z0.08275
Recv: echo: G29 W I7 J8 Z0.09150
Recv: echo: G29 W I8 J8 Z0.00375
Recv: echo:; Material heatup parameters:
Recv: echo: M145 S0 H220.00 B60.00 F255
Recv: echo: M145 S1 H235.00 B75.00 F255
Recv: echo:; Hotend PID:
Recv: echo: M301 P16.96 I1.27 D56.65
Recv: echo:; Bed PID:
Recv: echo: M304 P121.71 I23.05 D428.41
Recv: echo:; Controller Fan:
Recv: echo: M710 S255 I0 A1 D60 ; (100% 0%)
Recv: echo:; Z-Probe Offset:
Recv: echo: M851 X-40.00 Y-10.00 Z-2.22 ; (mm)
Recv: echo:; Stepper driver current:
Recv: echo: M906 X580 Y580 Z580
Recv: echo: M906 T0 E650
Recv:
Recv: echo:; Driver stepping mode:
Recv: echo: M569 S1 X Y Z
Recv: echo:; Linear Advance:
Recv: echo: M900 K0.20
Recv: echo:; Filament load/unload:
Recv: echo: M603 L200.00 U100.00 ; (mm)
Recv: ok
Send: M569
Recv: X driver mode: stealthChop
Recv: Y driver mode: stealthChop
Recv: Z driver mode: stealthChop
Recv: E driver mode: spreadCycle
from octoprint-eeprom-marlin.
cp2004
commented on July 23, 2024
Just to follow up on why this has not been added - the driver modes are defined a bit differently to almost every other EEPROM command.
S1: Set StealthChop mode
S0: Set SpreadCycle mode
This can be set for the different axes individually or multiple in one go, which is more difficult to fit in to the common data structure/definitions every other command follows. Additionally, in the M503 response it doesn't actually include the E configuration (perhaps because it is spreadcycle and the others are stealthchop) which makes it hard for this plugin to work out whether to show E values or not (Also applies to a printer that might have multiple tools, multiple Z axis steppers, etc.)
If I find time (there are other plugins higher up the TODO list), I may have a look to see if there is a way around this but I can't say if I will be able to add this.
from octoprint-eeprom-marlin.
skl111
commented on July 23, 2024
Yep, your correct in that when its SpreadCycle it doesn't show.
They correspond that with the S0 having it set to off and the S1 having it set to on for the other motors.
I understand there are other updates above this task, and I can continue to work around not having this feature.
from octoprint-eeprom-marlin.
Related Issues (20)
- CR-10 Smart printer isn't recognized as Marlin firmware HOT 5
- IMPORTANT: The next release of this plugin will not support Python 2
- Upgrade pre-commit and add pyupgrade HOT 1
- [Request]: Automatic scheduled EEPROM backups HOT 3
- [Bug]: PluginManager typo -> link to gihtub HOT 4
- [Request]: Only FIRMWARE INFO in the left column HOT 14
- [Bug]: Doesn't work with Snapmaker 2.0 A350 HOT 3
- [Request]: When enabled in Firmware, Add M306 data to Temperature tab HOT 7
- [Bug]: E0 stepper current not saved HOT 3
- Please add MPC to the menu HOT 2
- [Request]: Add LONG_FILENAME_WRITE_SUPPORT HOT 2
- [Bug]: After Marlin Update, ignore crc mismatch, restoring a config M112 ERROR when no bed mesh is stored HOT 2
- [Request]: Add M914 TMC Bump Sensitivity HOT 1
- [Request]: Add M423 support HOT 1
- [Request]: Using eprom locked on iPad HOT 6
- [Request]: Separate X and Y values for Input Shaping HOT 1
- Support- Willing to pay for your time HOT 1
- [Request]: Unkown Command M207 x8/x20 HOT 1
- [Bug]: Cannot install on Python 3.12 HOT 4
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from octoprint-eeprom-marlin.