batocera-linux / batocera.linux Goto Github PK
View Code? Open in Web Editor NEWbatocera.linux
Home Page: https://batocera.org
License: Other
batocera.linux
Home Page: https://batocera.org
License: Other
Hi , i'm using mame and NES, during the game for example the only way to charge coins is with 5 or 6 in keyboard ...
and the special hotkeys doesnt work during the game ..
https://github.com/recalbox/recalbox-os/wiki/Manual-%28EN%29#duringgame-special
Salut Nicolas,
First of all, thanks for working on this.
Since I have issues downloading your image from free.fr (separate issue incoming), I tried to compile recalbox remix on my own. Everything went fine, but I had the following issue during the actual compiling:
cp/except.o Error 1
recipe for target all-gcc failed
all-gcc error 2
And then, bye bye, it fails. I have the latest of everything installed on Ubuntu 16.10.
Hi,
How do I configure the update on Odroid XU4?
In the website says: "Once installed, do not forget to configure your recalbox.conf to upgrade from this website (see previous post)." but I can not find the "see previous post".
Thanks
Running the Pi 3 image and it boots into kodi when I wirelessly connect OEM microsoft controller to OEM wireless dongle.
When restarting the system, it does not save the settings made in the recalbox.conf file (audio volume for example). I also noticed that when you switch the boot screens, on reboot back to the default.
Any solution to this problem? Thanks
Are these the drivers that were needed for a working pine64 image? http://wiki.pine64.org/index.php/Mali_Driver
Version: 5.1 (2017-01-21)
Board: Odroid C2
Ps3 controller still doesn't work. Don't know if it is related to kernel version as you suggested before changing name (remix to batocera :) ).
Anyway thank you for the hard work. It works really fast with this board :)
Hi guys, i have tried to connect to my WiFi network from the EmuleStation, without success.
My network is WPA2 and my key is alphanumeric type h3ll0w0rld, and my ESSID is hidden.
Try to connect from the console, but I'm missing some Linux commands, but if I could verify that the interface is recognized.
# ip link show wlan0
3: wlan0: <BROADCAST,MULTICAST8000> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether b8:27:eb:eb:5e:9a brd ff:ff:ff:ff:ff:ff
# ip link set wlan0 up
ip: SIOCSIFFLAGS: Operation not possible due to RF-kill
# iw dev wlan0 link
-sh: iw: command not found
#
Could you give me a hand to connect?
I dont have sound using a laptop HP 240 G3
I'm posting this here because the recalbox-os repository is maybe not the better place to post it since im using your work at this repository for my Odroid XU4
Hi, i'm answering this thread after a request from Acris_ on the IRC "recalbox"
I own the first version of the Odroid XU4, the difference between them is only the fan (maybe only the color ?)
I tried on a Haier LE50M600CF TV
This issue is linked to https://github.com/recalbox/recalbox-os/issues/674#issuecomment-266217514
(You can read the answers on the thread, no proposed solutions worked)
Thank you in advance for your reading, time, and help :)
I can't change system, try use mount -o remount, rw / with putty but it doesn't work, trying add core for mame, mame2010 in usr/lib/libretro and change es_systems.cfg
Return massage "Ready-only file system"
This core works in Raspberry Pi 3.
Sorry for bad english.
Hi
I have a dell optiplex 160, and installed the recalbox remix on it but im having video performance issues, everything moves Ultra slow, my guess it has something to do with the sis driver support on linux,tried the same install on intel chipsets and it runs really well, is there a way to add sis support or drivers to the distro?, im not linux savvy...
tnx
Hi good morning. When start any cps2 rom It's returning home screen. Thanks.
Emulators wii, gamecube and dreamcast will not work with graphics card offboard, how change settings to open with card offboard. Graphic card AMD Radeon HD 6670.
It works very well with other emulators as psp, for example playing god of war.
Good Morning!, i have an issue with the bluetooth connection on my rpb3, i have a dongle but the controller of ps3 dont work via bluetooh... i have another control SFC Snes, and it works.. can anybody help me? :D
With cable works, but with bluetooth doesnt :(
Thank you for that wonderful preview build :)
I successfully built the 5.1 for rpi3.
I was wondering why the PS1 emulator didn't want to start although I dropped the BIOS-file and of course the ROM-files in the correct folders on the share partition.
I had to copy es_systems.cfg manually from share_init to share.
I also had to add the .bin file extensions to the PlayStation part in es_systems.cfg as my backups are in .bin format.
Hello, I look for a version of batocera in 5.1 who could work under raspberry 3?
Thank you very much for your help
In order to reuse old pcs, i think we need some installable x86_32 x86_64 versions on HDD
Recently I met the batocera.linux project. Previously I was using Recalbox 4.0
I must congratulate the creators and collaborators of the project. Version 5.1 is really very good.
I'd like to report an error, the http manager is not working. (I tried to access via wifi and cable.) In the common recalbox the manager works without problems.
Since I already posted this in the forum and you asked me to post it here, here I am.
OS revision: 5.1.0 (2017/01/12)
HW: Odroid-XU4
Controller: Dual Shock 3
Storage: 32 GB Sandisk Class 10 Micro SD card for OS, 256 GB USB 3.0 Sandisk thumb drive for ROMs/ISOs.
Accessories: Odroid USB 2.0 Wi-Fi Dongle (working and able to pull IP address)
Network accessible: Yes
Tried changing the .config file's HDMI output global resolution to CEA 1 HDMI, but keeps going back to 'default', upon rebooting the XU4. None of the emulators, with the sole exception of the N64 one (which has the CEA 1 HDMI override enabled) works.
Regarding Kodi: Kodi will try to start, but won't even leave the EmulationStation screen. Hooked up on HDMI port 1 of multiple TVs and does the same thing. Hangs for a bit, and then returns back to ES.
And second issue of the day,
I tried to download your images from your free.fr host, however, and since I am in Asia, I always end up with either incomplete or broken archive, no matter what. I tried download manager assistant and tons of other things, without any success. Archive always ends up being broken.
Can you consider making a torrent of your images? Would be much faster and most important, also guarantee the integrity of the file. Can't wait to try reicast on my XU4 :)
Thanks!
Hi,
after using original Recalbox i switched to batocera version due to more emulators support. but unfortunately after testing with external ntfs HDD contains the roms (used on original recalbox), it won't load roms from it!. tried another empty drive and it won't even create the recalbox folder. so whats the problem? i was hopping to use batocera version but not l;loading roms from external hdd would be useless for me and i think other users will agree.
Good first congratulations for the beautiful work. I'm from Brazil and I can say that we love the project!
1 my problem is with the boot animation vi that the call is by the omxplayer. Can we change this to a compatible player with PC x64 bits?
2 my wi fi does not work. I edited the configurations by the graph and by the file recalbox config. In both cases it does not work. I'm using a wbn 900 and it's listed in the compatibility list.
Thank you a hug
I read the latest version can be installed on hard drive. (5.1 x86 64bits)
But when i boot the usb key (pendrive) it hasn't option to install into hard drive.
Thanks !
I have a iPega 9021, works on nes, n64, very well
but in mame games and kodi, doesnt work....
any clue?
Hi,
No soud using HDMI and disk usage N/A. I changed the option forInternal, anyexternal and recalbox and I can´t send my roms ( Shows "No Space" using Network method ). Another issue: When I reboot batocera, I loose all of my configurations and I need select options again
I use Intel NUC 4520 core i5 with 500 gb internal HDD. I installed Batocera on internal HDD
Thanks!!!
Hi,
My controller was not recognized as a joystick. I resolved by editing the file "99-joysticks-exotics.rules" (via unsquashfs / mksquashfs)
SUBSYSTEM=="input", ATTRS{name}=="ipega Extending Game controller", MODE="0666", ENV{ID_INPUT_JOYSTICK}="1"
Here is the mapping of the keys for es-input.cfg
<inputConfig type="joystick" deviceName="ipega Extending Game controller" deviceGUID="0500000049190000020400001b010000">
<input name="a" type="button" id="168" value="1" code="305" />
<input name="b" type="button" id="167" value="1" code="304" />
<input name="down" type="hat" id="0" value="4" code="16" />
<input name="hotkey" type="button" id="177" value="1" code="314" />
<input name="joystick1left" type="axis" id="0" value="-1" code="0" />
<input name="joystick1up" type="axis" id="1" value="-1" code="1" />
<input name="joystick2left" type="axis" id="2" value="-1" code="2" />
<input name="joystick2up" type="axis" id="3" value="-1" code="5" />
<input name="l2" type="button" id="175" value="1" code="312" />
<input name="l3" type="button" id="180" value="1" code="317" />
<input name="left" type="hat" id="0" value="8" code="16" />
<input name="pagedown" type="button" id="174" value="1" code="311" />
<input name="pageup" type="button" id="173" value="1" code="310" />
<input name="r2" type="button" id="176" value="1" code="313" />
<input name="r3" type="button" id="181" value="1" code="318" />
<input name="right" type="hat" id="0" value="2" code="16" />
<input name="select" type="button" id="177" value="1" code="314" />
<input name="start" type="button" id="178" value="1" code="315" />
<input name="up" type="hat" id="0" value="1" code="16" />
<input name="x" type="button" id="171" value="1" code="308" />
<input name="y" type="button" id="170" value="1" code="307" />
</inputConfig>
with recalbox 4.1 on RPI3 this controller is detected with devicename="GamePad", so this correction may be necessary only for x64.
let me know if you need more infos Thanks, Fred.
I wonder if some one can verify the image for XU4 is compiled correctly in the provided download link http://batocera.linux.free.fr/upgrades/xu4/stable/last/recalbox-20161213.img.gz .Unfortunately this is not something im very familiar with. but it does not appear to contain a .img , rather 1 folder "Boot" . a Boot.ini and recalbox-boot.conf.
Edit: Disregard. An issue on my end it would seem.
Hey,
Trying to force the XU4 to 60hz at 1080p by using the following in the boot.ini:
setenv video_output "video=HDMI-A-1:1920x1080M@60"
However it is ignoring this and still running at 50hz.
The above works for Lakka.
Thanks
I can't launch any emulators as long as I have a PS3 controller USB wired.
The name in controller menu is "PS3 GA'EPAD".
When I use the same controller on bluetooth mode, no problem and the name is right (PS3 BLUETOOTH CONTROLLER)
Bonjour , je n'ai pas trouvé l'aide sur le forum , ni le le chat IRC .
J'ai installé la V5 en 64 bit sur un pc portable packard bell . Quand je branche le cable hdmi sur la TV , l'image est zoomée . J'aurais voulu éditer le fichier config.txt . Mais je ne le trouve pas .:/
J'ai un autre soucis , même si je choisi le son en sortie HDMI , le son reste sur l'ordinateur , même après avoir redemarrer .
Une petite idée ?
Hi there! Is there a forum available? I couldn't find it. Or should I use the recalbox forum?
Timo
i have a problem when i try psp emulation on my xu4 with 5.1 version.
everytime i start a psp game its loading, showing ingame loading screens of the games but then it jumps back to emustation. Am i doing smt wrong ?
emulationstation quits randomly for me. mostly happens when interacting with menus. some examples of when it has happened:
in all cases, i send up with Recalbox followed by a blinking cursor
is there a way to restart ES once i am out? is there a way to restart ES if I am on term (ctl + alt + f2)
finally, there doesnt seem to be restart emulationstation menu anywhere. I think i have seen this in retropie before. Is there a way to achieve this easily. This is needed to reload rom lists if they have changed. currently i have to reboot
Hi , I have batocera 5.1 x86 64 bits in usb key (pendrive).
I boot, configure (controller, wifi, etc), play ok ... but when I reboot all the changes are gone
Hi , now the second partition was formatted by the boot in ext4 format ... is possible to change it to ntfs or fat32 ? because is more easy to connect directly in windows/mac computer.
EmulationStation is migrating its XML metadata filing system to SQLite!
GlideN64mk2 is the only working core for N&4 on my xu4.
I tried to install High Res Texture but as ssoon as i change the config in gliden64mk2 to use HighRes Textures in "Rice" Format, my games wont start.
Also if I use other core like rice or glide and click a game, it goes black for 2 secs but back to ES.
I dont know if other cores worked from the start or if I did something wrong?
Since the c2 port and the upgrade of ppspp,
the pad doesn't work for me.
Hi,
I've been trying to edit my /etc/fstab to load roms from a NAS but I am unable to make any changes.
I tried "mount -o remount,rw /", but even after running that I do not have write access.
I saw something similar here and it mentions something about converting a file to ext4, but I don't know if that applies at all here.
Is there something simple I'm missing?
(I am trying to follow this tutorial here)
Thanks,
Ben
PSP doesn't open games with autosave or without autosave, games that already has load state work.
Message
This game uses Autosave feature. Insertion of a Memory Stick beyond this point may cause data to be overwritten. Do you want to enable the Autosave feature?
Can't Update the system when i try to update only Say "Download Size = 0" i need to do something in the config files?
trying the latest batocera build on zotac ci323 nano mini pc. Its an intel n3150 board
the usb image boots fine, but without network connectivity. I think its not detecting / configuring the ethernet correctly. Since i cannot ssh in without network, i don't know how to troubleshoot further
The PC is connected to a Tv, and I have wireless keyboard, if it helps to identify the problem
I have the raspberry pi build of recalbox working fine on same network
Bonjour,
J'utilise la version 5.0 pour x68_64:
sur un AMD Athlon X2 3800+
4 Go de Ram
Carte graphique intégrée : Radeon HD 4200
Sur un AMD Phenom II X4
4Go de Ram
Carte graphique Radeon HD6850
Je n'ai pas de son dans les jeux même en passant de "Auto" vers "HDMI"
J'ai du son avec le Phenom en passant par un casque audio par contre. Je vais tester sur l'Athlon avec le casque également.
Super travail d'adaptation sur diverses architectures tout de même :) Merci Susan.
Hi,
I use the Batocera 5.0 x86_64 version with the following configuration:
AMD Athlon X2 3800+
4 Gb Ram
Onboard Gpu Radeon HD 4200
AMD Phenom II X4
4Gb Ram
Radeon HD6850 GPU
I have no sound ingame even when i change "Auto" to "HDMI" I only have sound with the Phenom when i use the jack output.
However, nice adaptation work on several architecture :) Thank you Susan.
easyly visible on xu4,
go on configure the n64 emulator,
choice anyone
and it put bad values for n64.videomode breaking the n64 for example.
What happened
Left analog stick (movement) up/down only moves diagonal, left/right don't work at all
What should have happened
Up/down/left/right movement should work as directed
Enumerate your devices
Odroid XU4
How to reproduce the bug
Launch any N64 game using Libretro emulator/Glupen64 core
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.