zsa / docs Goto Github PK
View Code? Open in Web Editor NEWMisc ErgoDox EZ Files
Home Page: http://www.ergodox-ez.com
Misc ErgoDox EZ Files
Home Page: http://www.ergodox-ez.com
I've looked at other open source keyboards, and found downloadable PCB designs. I don't see that here. Are those designs available?
I'm thinking of buying this but unsure if it has linux support so Iwant to be sure before spending the buck
https://www.reddit.com/r/ergodox/comments/3gucvu/anyone_using_ergodox_with_linux/
Are the mouse keys or hyper keys available with the massdrop configurator or does that require C?
Also, will using the massdrop configuration tool to alter the base layer override the special layers that are included by default?
When using teensy-loader-cli
to flash a layout I get the following error when I press the reset button on my Ergodox EZ:
$ teensy-loader-cli --mcu=atmega32u4 -w -v ergodox_ez_firmware_zeds_layout_mggjzw.hex -v
Teensy Loader, Command Line, Version 2.1
Read "ergodox_ez_firmware_zeds_layout_mggjzw.hex": 25854 bytes, 80.2% usage
Waiting for Teensy device...
(hint: press the reset button)
Found device but unable to open
Found device but unable to open
Here are the exact steps I take:
dmesg
)teensy-loader-cli --mcu=atmega32u4 -v -w ergodox_ez_firmware_zeds_layout_mggjzw.hex
teensy-loader-cli
is running and that it has output Waiting for Teensy device...
What I have tried the following without success:
teensy-loader-cli
on different computersAfter reading the following PJRC forum post
I tried adding the mentioned UDEV rules, and that solved the problem for me:
$ teensy-loader-cli --mcu=atmega32u4 -v -w ergodox_ez_firmware_zeds_layout_mggjzw.hex
Teensy Loader, Command Line, Version 2.1
Read "ergodox_ez_firmware_zeds_layout_mggjzw.hex": 25854 bytes, 80.2% usage
Waiting for Teensy device...
(hint: press the reset button)
Found HalfKay Bootloader
Read "ergodox_ez_firmware_zeds_layout_mggjzw.hex": 25854 bytes, 80.2% usage
Programming..........................................................................................................................................................................................................
Booting
I'm closing this ticket directly since the problem is solved. The only
reason I created it was so that anyone else faced with the same problem will
easily find this ticket while searching for "Ergodox EZ found device unable to open"
or similar search terms.
For maximum convenience, here's a script that will install the UDEV rules for you
(unless you are using NixOS):
install-teensy-udev-rules.sh
#!/usr/bin/env bash
#
# Script that installs PJRC UDEV rules for allowing to use Teensy-based devices.
# Downloads the rules file, checks that it matches the SHA256 checksum in this
# script and then moves the downloaded UDEV file
# to "/lib/udev/rules.d/49-teensy.rules".
#
# Note: you need to be able to run sudo to use this script.
#
# Run without providing any arguments:
#
# ./install-teensy-udev-rules.sh
#
set -e
UDEV_RULES_NAME="49-teensy.rules"
UDEV_RULES_URL="https://www.pjrc.com/teensy/$UDEV_RULES_NAME"
UDEV_RULES_SHA256="031de0b26991b5a3b19c497d9c0a17f86c40c55d925b9d07d19ab89f2286469d $UDEV_RULES_NAME"
UDEV_RULES_DEST="/lib/udev/rules.d/49-teensy.rules"
WORK_DIR=$(mktemp -d)
function finish {
echo ">> Cleaning up work dir"
popd
rm -rf "$WORK_DIR"
echo "-- Clean up done"
}
trap finish EXIT
pushd "$WORK_DIR"
echo ">> Downloading UDEV rules file"
curl "$UDEV_RULES_URL" --output "$UDEV_RULES_NAME"
echo "031de0b26991b5a3b19c497d9c0a17f86c40c55d925b9d07d19ab89f2286469d $UDEV_RULES_NAME" > "$UDEV_RULES_NAME.sha256"
sha256sum -c "$UDEV_RULES_NAME.sha256"
if [ -f "$UDEV_RULES_DEST" ]; then
echo "UDEV rule '$UDEV_RULES_DEST' is already installed, quitting."
exit
fi
echo ">> Installing UDEV rules file"
sudo install -o root -g root -m 0664 "$UDEV_RULES_NAME" "$UDEV_RULES_DEST"
sudo udevadm control --reload-rules
sudo udevadm trigger
echo "-- Installation complete"
If you are using NixOS you simply add this to your
/etc/nixos/configuration.nix
file and run nixos-rebuild switch
:
services.udev.extraRules = ''
# UDEV rules for Teensy USB devices
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", ENV{ID_MM_DEVICE_IGNORE}="1"
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789A]?", ENV{MTP_NO_PROBE}="1"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789ABCD]?", MODE:="0666"
KERNEL=="ttyACM*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", MODE:="0666"
'';
The links in the README to the Fusion repository appear to be broken, has it gone private?
How do I submit an issue request for Fusion?
It no longer points to a .hex file. I did find a different file in the repo that may be the right one... would be good to know, for those of us who want to start with the default instead of configuring our own from scratch.
I'm trying to find out which teensy processor is in the E-EZ to use the cli app with on linux.
Is it atmega32u4?
Thanks ๐
Should I put pin in the hole?
In the README.markdown https://github.com/ErgoDox-EZ/docs/blob/master/keylist.tsv is no longer working.
Add information from jackhumbert/qmk_firmware about custom modifier keys.
This seems like a good place to document what keys are available. We could pull this list of keys and put it into fusion.
Or we could put this keylist directly into fusion. Unclear where the best place for it is.
Been having an issue with the Ergodox (with QMK) not waking up after the computer goes to sleep. Forced to unplug, wait ~10 seconds, re-plug keyboard to get a keyboard reboot (led sequence flash), after a few seconds, the keyboard responds. Can't do a quick plug/re-plug, nor does it work immediately. Doesn't seem to be a hardware setting--that same port works fine with other keyboards. Is this something intrinsic to the Teensy microcontroller?
Uh I know this is wrong place, but is the GUI configurator source code somewhere? I would like to try to write a really simple keymap support for it.
Take for instance finnish keymap file in Ubuntu/Linux:
/usr/share/X11/xkb/symbols/fi
//
// X keyboard maps for Finland
//
// SFS 5966 / Kotoistus keymap created by Troy Korjuslommi
// Classic keymap based on traditional by Marko Myllynen
// Eliminate deadkeys alternative sent by Linus Torvalds
//
default partial alphanumeric_keys
xkb_symbols "kotoistus" {
// Official keymap for Finland based on SFS 5966 standard
//
// This keymap implements all the functionality of Annex 1
// of the standard and additionally defines the following to
// allow entering these characters with keyboards without LSGT.
//
// AE08+4, U+003C : LESS-THAN SIGN (less)
// AE09+4, U+003E : GREATER-THAN SIGN (greater)
// AD08+4, U+007C : VERTICAL LINE (bar)
//
// Annex 3 of the standard is implemented in fi_FI.UTF-8/Compose
name[Group1]="Finnish";
key <TLDE> { [ section, onehalf, dead_stroke, NoSymbol ] };
key <AE01> { [ 1, exclam, NoSymbol, exclamdown ] };
key <AE02> { [ 2, quotedbl, at, rightdoublequotemark ] };
key <AE03> { [ 3, numbersign, sterling, guillemotright ] };
key <AE04> { [ 4, currency, dollar, guillemotleft ] };
key <AE05> { [ 5, percent, permille, leftdoublequotemark ] };
key <AE06> { [ 6, ampersand, singlelowquotemark, doublelowquotemark ] };
key <AE07> { [ 7, slash, braceleft, NoSymbol ] };
key <AE08> { [ 8, parenleft, bracketleft, less ] };
key <AE09> { [ 9, parenright, bracketright, greater ] };
key <AE10> { [ 0, equal, braceright, degree ] };
key <AE11> { [ plus, question, backslash, questiondown ] };
key <AE12> { [ dead_acute, dead_grave, dead_cedilla, dead_ogonek ] };
key <AD01> { [ q, Q, q, Q ] };
key <AD02> { [ w, W, w, W ] };
key <AD03> { [ e, E, EuroSign, NoSymbol ] };
key <AD04> { [ r, R, r, R ] };
key <AD05> { [ t, T, thorn, THORN ] };
key <AD06> { [ y, Y, y, Y ] };
key <AD07> { [ u, U, u, U ] };
key <AD08> { [ i, I, idotless, bar ] };
key <AD09> { [ o, O, oe, OE ] };
key <AD10> { [ p, P, dead_horn, dead_hook ] };
key <AD11> { [ aring, Aring, dead_doubleacute, dead_abovering ] };
key <AD12> { [ dead_diaeresis, dead_circumflex, dead_tilde, dead_macron ] };
key <AC01> { [ a, A, schwa, SCHWA ] };
key <AC02> { [ s, S, ssharp, NoSymbol ] };
key <AC03> { [ d, D, eth, ETH ] };
key <AC04> { [ f, F, f, F ] };
key <AC05> { [ g, G, g, G ] };
key <AC06> { [ h, H, h, H ] };
key <AC07> { [ j, J, j, J ] };
key <AC08> { [ k, K, kra, NoSymbol ] };
key <AC09> { [ l, L, dead_stroke, NoSymbol ] };
key <AC10> { [ odiaeresis, Odiaeresis, oslash, Oslash ] };
key <AC11> { [ adiaeresis, Adiaeresis, ae, AE ] };
key <BKSL> { [ apostrophe, asterisk, dead_caron, dead_breve ] };
key <LSGT> { [ less, greater, bar, NoSymbol ] };
key <AB01> { [ z, Z, ezh, EZH ] };
key <AB02> { [ x, X, multiply, periodcentered ] };
key <AB03> { [ c, C, c, C ] };
key <AB04> { [ v, V, v, V ] };
key <AB05> { [ b, B, b, B ] };
key <AB06> { [ n, N, eng, ENG ] };
key <AB07> { [ m, M, mu, emdash ] };
key <AB08> { [ comma, semicolon, rightsinglequotemark, leftsinglequotemark ] };
key <AB09> { [ period, colon, dead_belowdot, dead_abovedot ] };
key <AB10> { [ minus, underscore, endash, dead_belowcomma ] };
include "nbsp(level4)"
include "nbsp(level3)"
include "kpdl(comma)"
include "level3(ralt_switch)"
};
It wouldn't be too hard to convert AXXX to VK code, then take (at very least) the first item on the list of each item and show that instead in the GUI configurator.
Can we get the design/CAD files for the case and/or the tenting kit?
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.