Axis Jog Buttons Direction about grblcontroller HOT 4 CLOSED

OK, If I lay my tablet on my CNC table, the 8 buttons on the Jog Pad do not correspond to the direction that the spindle will actually move. Now if I rotate the tablet 90 degrees counter clockwise and ignore the rest of screen the buttons and spindle are now in sync. Obviously not a good solution because now the rest of the screen is sideways. I do not know how to code so what I propose my not be practical, but here is an idea of what would make the interface flexible to all variety of machines. In the setup menu you could add a line to configure the Jog Pad, it would have 4 options "Rotate the pad 0 degrees, 90 degrees, 180 degrees, 270 degrees". It would not change the look of the main screen but it would change the logic assigned to the buttons. Example: If I set the config to 90 degrees, then the logic that was called by the upper middle button would now be called by the left middle button and all of the other buttons would be shifted accordingly. I could imagine this to be a lot of coding on your part, If the logic for the buttons is currently coded to the button you would have to change it to variables and then call the variables from the buttons. So I am not thinking that it is easy on your part, but the result would certainly make the end product much more adaptable to the hobby CNC builder. Thanks for your time.