macOS on DELL XPS13 (9350)
This project targets at giving the relatively complete functional macOS for XPS13 9350. Before you start, there's a brief introduction of how to finish powering up macOS on your laptop:
- Create a vanilla installation disk(removable disk).
- Install Clover with UEFI only and UEFI64Drivers to the installation disk just created.
- Replace the origin Clover folder with the one under my Git/XPS9350-macOS/CLOVER.
- BIOS settings:
- AHCI instead of AHCI RAID
- Install macOS
- Once you finish installation of macOS, you can do the following steps to finish the post installation of macOS
How to use deploy.sh?
Download the latest version installation package/directory by entering the following command in a terminal window:
git clone https://github.com/syscl/XPS9350-macOS
This will download the whole installation directory to your current directory(./) and the next step is to change the permissions of the file (add +x) so that it can be run.
cd XPS9350-macOS
chmod +x ./deploy.sh
Run the script in a terminal windows by(Note: You should dump the ACPI tables by pressing F4/Fn+F4 under Clover first and then execute the following command lines):
./deploy.sh
Reboot your macOS to see the change. If you have any problem about the script, try to run deploy in DEBUG mode by
./deploy.sh -d
Note: For two finger scrolling you need to change the speed of the Scrolling once to get it work and also have to enable them in Trackpad preferences.
TODO List
Next week I have 3 What I will do next week are listed belowfinal exams
, so I will be back in next Wednesday!
- Remove patched ACPI tables directories(precomiple, raw, comiple) every time before acpi compile
- Add reboot fix
ResetAddress = 0xB2
and ResetValue = 0x73
to script using auto detection from FACP table- Refine ACPI patches such that all XPS 13 9350 users can enjoy(still in progress)
- Refine AppleHDA
- New FixUSB.sh to fix a bug that external devices will disappear when cold boot into macOS
- Import IOPowerManagement
- ACPI Keyboard
Change Log
2017-01-27
- Inject Device(USBX) with properties and _DSM method rewrite credit syscl
- Fix shutdown become reboot issue #29
- Added _SSD, GTF0 method credit syscl
- Added IONVMeFamily Preferred Block Size 0x10 -> 0x01 credit Pike R. Alpha implement by syscl
- Updated port0000 setting for 0x19260004 credit syscl
2017-01-25
- Enable IOPCIFamily to set tolerance latency for PCI devices (c) syscl
- Prepare for @icedman 's VoodooPS2Controller(tuned by syscl)
- Fixed RP0X rename issue
2017-01-24
- Inject SsdtS3 from MacBook credit syscl's stripple down
- Added port injector for XHC/EHC credit syscl
2017-01-22
- Inject NVMe power management properties credit Pike R. Alpha("use-msi", "nvme-LPSR-during-S3-S4") syscl("deep-idle")
2017-01-17
- Use refs.txt to try to fix issue #18 credit @x4080 who reminded to use refs.txt
- Updated rebuild kernel cache command
2016-12-19
- Remove _PRW, _PSW in PWRB(PNP0C0C)
- RP09::ARPT->RP09::SSD0 (c) syscl
- Remove pnp0c14
- _T_2 ->T_2
- Rename definition block
2016-12-18
- Fixed update/sync file issue
2016-12-17
- Rename HDAS->HDEF for layout to inject successfully
- PBTN->PWRB
2016-12-16
- Updated FaceTimeHD keys from MacBookPro13,2
- Cleanup redundant kexts
- Sort kexts and sync 10.11's kexts
- _PWR val fixed
- PXSX to ARPT
2016-12-15
- HWP is ready
- Boot issue should go away; xh_rvp07 must be included
2016-12-14
- Fixed audio injection bug causes by Clover
- Updated 3 cpu models i5-6200, i7-6500, i7-6560 SSDT-pr
- Resolve hp distortion and static noise
- Optimization CC credit syscl
- Updated BT driver for DW1830
- Fixed stuck of some function in deploy
- Fixed SSDT-pr installation issue
2016-12-13
- Auto correct reset val and address from FACP
- Added HDMI property
- Updated DisplayLink Driver to 2.6.0
2016-12-12
- Fixed/refined DSDT patch
- Reading FACP to correct reset value and reset address credit syscl
- Remove Glan patch
2016-12-11
- Fix MDBG issue credit syscl
- Fix word field mismatch issue credit syscl
- Fix brightness key function credit azlvda, tdmsn
2016-12-10
- Refined lid wake issue: 0a -> 0f for 0x19260004 credit syscl
2016-12-08
- Sync fixUSB to latest version: 2016-9-17
2016-12-07
- Fixed the Sunix camera issue I mentioned before credit syscl
2016-12-04
- Fixed boot issue by
AddClockID
andFixOwnership
- Fixed syntax error
- Correct frame buffer name for SKL
2016-12-01
- Inject PMCR then macOS will combine PPMC together to make AppleIntelPCHPMC load correctly credit syscl
2016-11-29
- Fixed reboot unstable issue and speed up reboot progress
ResetAddress = 0xB2
andResetValue = 0x73
credit syscl
2016-11-22
- Added lspci to list all pci devices
2016-11-20
- Correct SKL laptops' internal display connector type from LVDS to eDP credit syscl
- Added lid wake auto patches for deploy.sh
- Inject SSDT-XPS13SKL.aml
2016-11-19
- PPMC -> PMCR
- Insert DMAC for macOS credit syscl
- Make Device (MATH) load correctly credit syscl
- SBTN -> SLPB with _STA 0x0B credit syscl
- Eliminate SgRef
2016-11-18
- Fixed HD520 glitches on Sierra credit Pikeralpha
- Eliminate redundant acpi table & patches
2016-11-17
- Fixed brightness save issue: EmuVariableUefi-64 + IntelBacklight + /nvram.plist
2016-11-15
- Fixed screen blank when resume from sleep credit syscl/lighting/Yating Zhou
2016-11-12
- First commit