yitian134 / mod-spdy Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/mod-spdy
Automatically exported from code.google.com/p/mod-spdy
We currently don't include err_headers_out in the output filter. Should we?
Original issue reported on code.google.com by [email protected]
on 26 Feb 2010 at 1:08
What steps will reproduce the problem?
1. Add mod_spdy.dll to modules
2. modify conf file to load mod_spdy
3. run http://localhost in chrome
What is the expected output? What do you see instead?
apche page should be shown, instead i get page cant be displayed
What version of the product are you using? On what operating system?
google chrome 4.0.249.89 (38071)
Apache 2.2.14
OS:windows prof XP
Please provide any additional information below.
error log says this
[Fri Feb 26 00:10:38 2010] [error] [0226/001038:ERROR:spdy_framer.cc(242)]
Unexpectedly large frame. Spdy session is likely corrupt.\r
[Fri Feb 26 00:10:38 2010] [notice]
[0226/001038:FATAL:spdy_to_http_converter.cc(40)] Check failed: false. \r
[Fri Feb 26 00:10:38 2010] [notice]
[0226/001038:FATAL:spdy_frame_pump.cc(107)] Check failed:
actual_bytes_consumed == bytes_available. \r
Original issue reported on code.google.com by [email protected]
on 25 Feb 2010 at 10:14
It seems that some response streams end up getting truncated. For instance on
our test server the file:
https://ec2-107-21-132-32.compute-1.amazonaws.com/wp-admin/load-styles.php?c=0&d
ir=ltr&load=admin-bar,wp-admin
gets served truncated, and the Chrome browser refuses to save even a byte of it
to disk.
If you fetch the same resource over HTTP:
http://ec2-107-21-132-32.compute-1.amazonaws.com/wp-admin/load-styles.php?c=0&di
r=ltr&load=admin-bar,wp-admin
it works just fine.
I'm guessing that this may be due to some chunked encoding issues we haven't
worked out yet.
Original issue reported on code.google.com by [email protected]
on 21 Dec 2011 at 8:50
The docs at https://developers.google.com/speed/spdy/mod_spdy/php suggest using
mod_fcgi to run PHP. The preferred way to run PHP via fastcgi is now to use
php-fpm: http://php-fpm.org
PHP docs: http://php.net/manual/en/install.fpm.php
Original issue reported on code.google.com by [email protected]
on 10 Aug 2012 at 8:13
What version/revision number of mod_spdy are you using?
none
What version of Apache are you using, and on what operating system? (Use
`apache2ctl -v` to check.)
Server version: Apache/2.2.16 (Debian)
Server built: Feb 5 2012 21:35:42
What other Apache modules are you using? (Use `apache2ctl -M` to check.)
Loaded Modules:
core_module (static)
log_config_module (static)
logio_module (static)
mpm_prefork_module (static)
http_module (static)
so_module (static)
actions_module (shared)
alias_module (shared)
auth_basic_module (shared)
auth_token_module (shared)
authn_file_module (shared)
authz_default_module (shared)
authz_groupfile_module (shared)
authz_host_module (shared)
authz_user_module (shared)
autoindex_module (shared)
cache_module (shared)
cgi_module (shared)
cgid_module (shared)
deflate_module (shared)
dir_module (shared)
disk_cache_module (shared)
env_module (shared)
expires_module (shared)
fcgid_module (shared)
headers_module (shared)
include_module (shared)
info_module (shared)
mem_cache_module (shared)
mime_module (shared)
mime_magic_module (shared)
negotiation_module (shared)
pagespeed_module (shared)
php5_module (shared)
reqtimeout_module (shared)
rewrite_module (shared)
ruby_module (shared)
setenvif_module (shared)
ssl_module (shared)
status_module (shared)
suexec_module (shared)
suphp_module (shared)
h264_streaming_module (shared)
What browser version did you use to access the mod_spdy server? On what
operating system? What flags was the browser invoked with? (For
Chrome/Chromium, go to about:version to check.)
none, unable to build
What steps will reproduce the problem?
mkdir modssl
cd modssl
svn export
http://mod-spdy.googlecode.com/svn/trunk/src/build_modssl_with_npn.sh
./build_modssl_with_npn.sh
What is the expected result? What do you see instead?
doesn't build, instead I see
./build_modssl_with_npn.sh
Using buildroot: /tmp/tmp.eZZADbNnKf
Downloading http://www.openssl.org/source/openssl-1.0.1-beta2.tar.gz
######################################################################## 100,0%
Downloading http://www.apache.org/dist/httpd/httpd-2.2.21.tar.gz
######################################################################## 100,0%
md5sum mismatch for httpd-2.2.21.tar.gz
Build aborted.
Cleaning up ... done
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 24 Feb 2012 at 1:11
When i POST a form via https which has at least 1 datafield via Chrome
18.0.997.0 i get the following error in the apache error_log:
[Mon Jan 30 21:53:17 2012] [error] [client 2001:4dd0:ff00:1ef::2] Invalid
method in request 0
The POST Data isn´t transmitted to php, (postdata is empty)..
I use mod_fcgid to drive php (because mod_php isn´t threadsafe)
i use the r231 version of mod_spdy and used the script on this google project
page to compile mod_ssl
The problem disappears when i disable mod_spdy
https://admin.neosolve.de/posttest.php <- this is a script on the server which
just echos $_POST (php)
My apache version is Apache/2.2.16 (Debian)
Original issue reported on code.google.com by timo.witte
on 30 Jan 2012 at 10:02
What version/revision number of mod_spdy are you using?
https://dl-ssl.google.com/dl/linux/direct/mod-spdy-beta_current_amd64.deb
What version of Apache are you using, and on what operating system? (Use
`apache2ctl -v` to check.)
Server version: Apache/2.2.16 (Debian)
Server built: Apr 1 2012 07:14:38
What other Apache modules are you using? (Use `apache2ctl -M` to check.)
Loaded Modules:
core_module (static)
log_config_module (static)
logio_module (static)
mpm_prefork_module (static)
http_module (static)
so_module (static)
alias_module (shared)
auth_basic_module (shared)
authn_file_module (shared)
authz_default_module (shared)
authz_groupfile_module (shared)
authz_host_module (shared)
authz_user_module (shared)
autoindex_module (shared)
cgi_module (shared)
dav_module (shared)
dav_svn_module (shared)
authz_svn_module (shared)
deflate_module (shared)
dir_module (shared)
env_module (shared)
expires_module (shared)
fcgid_module (shared)
gnutls_module (shared)
mime_module (shared)
negotiation_module (shared)
php5_module (shared)
reqtimeout_module (shared)
rewrite_module (shared)
setenvif_module (shared)
spdy_module (shared)
status_module (shared)
What steps will reproduce the problem?
1. Start Apache server with GnuTLS enabled.
2. Check /var/log/apache2/error.log for error messages related to .
What is the expected result? What do you see instead mod-spdy?
mod-spdy should have been loaded successfully. Instead, it complains that
mod_ssl is not installed.
Please provide any additional information below.
It seems that mod-spdy currently depends on mod_ssl. However, GnuTLS provides
HTTP with SSL/TLS as well.
Original issue reported on code.google.com by [email protected]
on 18 Apr 2012 at 9:06
What steps will reproduce the problem?
1. download tar
2. gclient sync --force
3. make out/Debug/flip_in_mem_edsm_server
What is the expected output? What do you see instead?
Ideally this should build without issues.. I got chrome to build without
errors.
./net/tools/flip_server/constants.h: At global scope:
./net/tools/flip_server/constants.h:15: error: ‘kSpdySegmentSize’ defined
but not used
./net/spdy/spdy_protocol.h:141: error: ‘spdy::kSpdyStreamMaximumWindowSize’
defined but not used
I am trying to do some tests for SPDY server and not able to build it
What version of the product are you using? On what operating system?
My operating system is ubuntu 10.10
Linux vishal-box 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010
i686 GNU/Linux
Please provide any additional information below.
I checked the commit log and seems this was part of some refactoring which has
broken the build.
Any way to get the build working??
Original issue reported on code.google.com by [email protected]
on 19 Feb 2011 at 2:13
From the mod-spdy-discuss mailing list:
I have a weird problem with mod_spdy and the ssl option SSLRequireSSL.
Without the option i get a SPDY connection, but when I turn on
SSLRequireSSL on a directory I get "403 Forbidden" and in the ssl
error log:
[debug] ssl_engine_io.c(1925): OpenSSL: I/O error, 5 bytes expected to read on BIO#7f5461b71130 [mem: 7f5461b98083]
[error] access to /var/www/html/ failed, reason: SSL connection required"
If I turn off spdy, the ssl connection works.
Original issue reported on code.google.com by [email protected]
on 6 Mar 2012 at 10:08
Reported by Andries Louw Wolthuizen on the mod-spdy-discuss list:
mod_spdy is generating intermittent errors of the form:
[error] [2612:2628:ERROR:mod_spdy.cc(385)] Error during speculative
read: 70007
This represents an APR_TIMEUP status, which doesn't warrant logging an error in
this case. We should suppress this message for APR_TIMEUP (or at least demote
it to a lesser log-level).
Original issue reported on code.google.com by [email protected]
on 30 Jan 2012 at 3:02
The current InputFilterInputStream flattens the next filter's brigades into a
byte stream.
However, this means that we end up discarding metadata buckets, like EOF.
We need to figure out which buckets we might be ignoring and possibly come up
with a way to pass them on to the next filter.
Original issue reported on code.google.com by [email protected]
on 28 Jan 2010 at 1:50
What version/revision number of mod_spdy are you using?
we waas unable to compile mod_spdy from the get started guide in the wiki as
there was no make file. So we grabbed on of the prebundled mod_spdy's.
What version of Apache are you using, and on what operating system? apache
2.2.22-3 arch linux 3.3.2-1-ARCH 64bit
What other Apache modules are you using?
Loaded Modules:
core_module (static)
mpm_prefork_module (static)
http_module (static)
so_module (static)
authn_file_module (shared)
authn_default_module (shared)
authz_host_module (shared)
authz_groupfile_module (shared)
authz_user_module (shared)
authz_default_module (shared)
auth_basic_module (shared)
auth_digest_module (shared)
cache_module (shared)
mem_cache_module (shared)
reqtimeout_module (shared)
ext_filter_module (shared)
include_module (shared)
filter_module (shared)
deflate_module (shared)
log_config_module (shared)
env_module (shared)
mime_magic_module (shared)
cern_meta_module (shared)
expires_module (shared)
headers_module (shared)
unique_id_module (shared)
setenvif_module (shared)
version_module (shared)
mime_module (shared)
autoindex_module (shared)
cgi_module (shared)
cgid_module (shared)
vhost_alias_module (shared)
dir_module (shared)
actions_module (shared)
alias_module (shared)
rewrite_module (shared)
fcgid_module (shared)
ssl_module (shared)
spdy_module (shared)
What browser version did you use to access the mod_spdy server? On what
operating system? What flags was the browser invoked with? (For
Chrome/Chromium, go to about:version to check.)
Google Chrome 18.0.1025.162 (Official Build 131933) m
OS Windows
WebKit 535.19 (@113052)
JavaScript V8 3.8.9.18
Flash 11,2,202,229
User Agent Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/535.19 (KHTML, like
Gecko) Chrome/18.0.1025.162 Safari/535.19
Command
Line "C:\Users\Xiamen\AppData\Local\Google\Chrome\Application\chrome.exe"
--flag-switches-begin --flag-switches-end
Executable
Path C:\Users\Xiamen\AppData\Local\Google\Chrome\Application\chrome.exe
Profile Path C:\Users\Xiamen\AppData\Local\Google\Chrome\User Data\Default
Also had the same issues from friends running chromium oon both Arch Linux and
Linux Mint
What steps will reproduce the problem?
1. having the page loaded
What is the expected result? What do you see instead?
Not having the error.log spam this error message.
Please provide any additional information below.
regualur spams errors such as this:
[warn] [client 192.168.1.2] [stream 851]
[20632:20633:WARNING:spdy_to_http_filter.cc(168)] Unsupported read mode (2) on
stream 851
Original issue reported on code.google.com by [email protected]
on 20 Apr 2012 at 9:25
On my desktop, mod_spdy works fine. On my laptop, I'm consistently getting
2 data frames and no SYN_REPLY frame. Here's an example:
(Might want to switch to a fixed-width font)
$ hexdump -C
127.000.000.001.08080-127.000.000.001.33284
00000000 00 00 00 00 01 00 00 00 ea 48 54 54 50 2f 31 2e
|.........HTTP/1.|
00000010 31 20 32 30 30 20 4f 4b 0d 0a 44 61 74 65 3a 20 |1 200
OK..Date: |
00000020 54 75 65 2c 20 30 39 20 46 65 62 20 32 30 31 30 |Tue, 09 Feb
2010|
00000030 20 32 31 3a 34 36 3a 34 32 20 47 4d 54 0d 0a 53 | 21:46:42
GMT..S|
00000040 65 72 76 65 72 3a 20 41 70 61 63 68 65 2f 32 2e |erver:
Apache/2.|
00000050 32 2e 38 20 28 55 62 75 6e 74 75 29 0d 0a 4c 61 |2.8
(Ubuntu)..La|
00000060 73 74 2d 4d 6f 64 69 66 69 65 64 3a 20 46 72 69 |st-Modified:
Fri|
00000070 2c 20 30 35 20 46 65 62 20 32 30 31 30 20 31 35 |, 05 Feb 2010
15|
00000080 3a 32 36 3a 30 36 20 47 4d 54 0d 0a 45 54 61 67 |:26:06
GMT..ETag|
00000090 3a 20 22 33 65 36 31 34 39 2d 32 64 2d 34 37 65 |: "3e6149-2d-
47e|
000000a0 64 63 31 31 66 34 62 66 38 30 22 0d 0a 41 63 63
|dc11f4bf80"..Acc|
000000b0 65 70 74 2d 52 61 6e 67 65 73 3a 20 62 79 74 65 |ept-Ranges:
byte|
000000c0 73 0d 0a 43 6f 6e 74 65 6e 74 2d 4c 65 6e 67 74 |s..Content-
Lengt|
000000d0 68 3a 20 34 35 0d 0a 43 6f 6e 74 65 6e 74 2d 54 |h:
45..Content-T|
000000e0 79 70 65 3a 20 74 65 78 74 2f 70 6c 61 69 6e 0d |ype:
text/plain.|
000000f0 0a 0d 0a 00 00 00 01 01 00 00 2d 3c 68 74 6d 6c |..........-
<html|
00000100 3e 3c 62 6f 64 79 3e 3c 68 31 3e 49 74 20 77 6f |><body><h1>It
wo|
00000110 72 6b 73 21 3c 2f 68 31 3e 3c 2f 62 6f 64 79 3e
|rks!</h1></body>|
00000120 3c 2f 68 74 6d 6c 3e 0a |</html>.|
00000128
Original issue reported on code.google.com by [email protected]
on 10 Feb 2010 at 1:48
In HttpStreamAccumulator, our implementation needs to match the one in the
Apache core filters impl. Specifically we need to match the impl in
core_filters.c ap_core_input_filter. Ideally we should have unit tests to
verify that the implementations are consistent.
Original issue reported on code.google.com by [email protected]
on 25 Feb 2010 at 2:45
https://www.modspdy.com/world-flags/. - broken ?
Original issue reported on code.google.com by [email protected]
on 5 Jun 2012 at 7:35
On my laptop (ubuntu linux) I'm finding that the apache request_rec's
request headers are always NULL in the output filter. This is different from
the behavior on my desktop (also ubuntu linux).
In both cases I'm running apache 2.2.8.
On the laptop I have a minimal module configuration (disabled all optional
modules) so it could be that some other module is causing the headers to get
populated on my desktop.
Original issue reported on code.google.com by [email protected]
on 9 Feb 2010 at 9:50
The common way to force HTTP traffic over to HTTPS is to use mod_rewrite like
so:
RewriteCond %{HTTPS} off
RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI}
as described in e.g.:
http://www.cyberciti.biz/tips/howto-apache-force-https-secure-connections.html
See the mod_rewrite docs:
http://httpd.apache.org/docs/current/mod/mod_rewrite.html#rewritecond
The HTTPS variable is populated in mod_rewrite by calling the mod_ssl optional
hook ssl_is_https, which returns false for any of the mod_spdy request handling
threads.
The result is that web servers that use the above redirect pattern go into a
redirect loop.
A mod_spdy-safe way to achieve the same redirect is:
RewriteCond %{SERVER_PORT} ^80$
RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI}
but we should still fix this.
This is closely related to issue 31. As Matthew notes in that issue, "the SPDY
stream requests are handled internally using "virtual" connections for which
mod_ssl is disabled".
We'll need to think about perhaps leaving mod_ssl "enabled" but have it pass
traffic through.
Alternatively, perhaps we can export an ssl_is_https function ourselves; not
sure how that would work exactly and what the ordering is for which module
would "win" when registering. So this seems quite fragile.
More thought needed.
Original issue reported on code.google.com by [email protected]
on 15 Apr 2012 at 10:57
We might be doing this already, but if not, we need to add support for it.
Please close this if we're already disabling chunking.
Original issue reported on code.google.com by [email protected]
on 26 Feb 2010 at 1:06
File: build_modssl_with_npn.sh
APACHE_HTTPD_SRC_TGZ_URL="http://www.apache.org/dist/httpd/httpd-2.2.21.tar.gz"
This URL is invalid. It should be changed to
APACHE_HTTPD_SRC_TGZ_URL="http://archive.apache.org/dist/httpd/httpd-2.2.21.tar.
gz"
Original issue reported on code.google.com by [email protected]
on 24 Feb 2012 at 1:04
What steps will reproduce the problem?
1. Followed the instructions on HowToBuild on
http://code.google.com/p/mod-spdy/wiki/HowToBuild page and for the
Prerequisites the chapter for Ubuntu on
What is the expected result? What do you see instead?
On compiling the following output:
barney@csl-ubu-apache:~/src/mod_spdy/src$ make BUILDTYPE=Release
CXX(target) out/Release/obj.target/base/third_party/chromium/src/base/time_posix.o
third_party/chromium/src/base/time_posix.cc: In member function ‘timespec
base::TimeDelta::ToTimeSpec() const’:
third_party/chromium/src/base/time_posix.cc:27:55: error: narrowing conversion
of ‘(microseconds * 1000)’ from ‘int64 {aka long long int}’ to ‘long
int’ inside { } [-fpermissive]
make: ***
[out/Release/obj.target/base/third_party/chromium/src/base/time_posix.o] Error 1
Please provide any additional information below.
Ubuntu 11.10
gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3)
Didn't install lib32stdc++6, was not found. Instead I installed libstdc++6.
Didn't install python2.5-dev, was not found. Instead I installed python2.6-dev
and python2.7-dev
Didn't install sun-java6-fonts, was not found.
Original issue reported on code.google.com by [email protected]
on 23 Feb 2012 at 8:53
Not an issue but it might be usefull to know if the client is connected via
SPDY or not.
Perhaps by setting an "SPDY" environment variable to spdy version it might be
sufficient.
Thanks for your work.
Ronan
Original issue reported on code.google.com by [email protected]
on 22 Feb 2012 at 4:27
*What version/revision number of mod_spdy are you using?*
0.9.2.2-r350
*What version of Apache are you using, and on what operating system? (Use
`apache2ctl -v` to check.)*
Server version: Apache/2.2.22 (Debian)
Server built: Aug 3 2012 22:00:17
*What other Apache modules are you using? (Use `apache2ctl -M` to check.)*
Loaded Modules:
core_module (static)
log_config_module (static)
logio_module (static)
version_module (static)
mpm_worker_module (static)
http_module (static)
so_module (static)
actions_module (shared)
alias_module (shared)
auth_basic_module (shared)
authn_file_module (shared)
authz_default_module (shared)
authz_groupfile_module (shared)
authz_host_module (shared)
authz_user_module (shared)
autoindex_module (shared)
cgi_module (shared)
cgid_module (shared)
deflate_module (shared)
dir_module (shared)
env_module (shared)
fastcgi_module (shared)
mime_module (shared)
negotiation_module (shared)
reqtimeout_module (shared)
rewrite_module (shared)
setenvif_module (shared)
spdy_module (shared)
ssl_module (shared)
status_module (shared)
*What browser version did you use to access the mod_spdy server? On what
operating system? What flags was the browser invoked with? (For
Chrome/Chromium, go to about:version to check.)*
Mozilla/5.0 (Linux; U; Android 4.0.4; en-gb; MZ601 Build/I.7.1-45)
AppleWebKit/534.30 (KHTML, like Gecko) Version/4.0 Safari/534
.30
(built-in motorola xoom browser)
*What steps will reproduce the problem?*
open spdy-enabled website, see only one page loaded (no css, js, images). any
attempts to click on any links results in 'Connection Problem - A network error
has occured' on the client side.
On the server side, 200 0 is in the logs, 200 for error code, 0 for document
size :-\
*Please provide any additional information below.*
switching to chrome for android fixes the problem. so does turning spdy off.
Original issue reported on code.google.com by [email protected]
on 30 Aug 2012 at 1:09
Hi,
When I configure a directory using http basic authentication I cannot use SPDY.
Chrome enter in an endless loop when I put https://xxx.yyy.com/sms in the
address bar.
I can use spdy on a directory without basic authentication
I use apache 2.2.22 with this modules (direct copy from my conf):
ssl spdy alias auth_basic authn_file authz_host authz_groupfile authz_default
authz_user autoindex cgi dir env expires include log_config mime setenvif
suexec userdir rewrite jk auth_digest ldap authnz_ldap proxy proxy_ajp
proxy_http passenger fcgid scgi dav dav_svn headers flvx python authn_otp
deflate
the interesting parts of my apache site.conf are:
<VirtualHost 192.168.2.10:80>
ServerName xxx.yyy.com
DocumentRoot /srv/www/xxx.yyy.com
AddDefaultCharset utf-8
<Directory "/srv/www/xxx.yyy.com/sms">
options followsymlinks
RewriteEngine On
RewriteCond %{HTTPS} off
RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI}
</Directory>
</VirtualHost>
<VirtualHost 192.168.2.10:443>
SSLEngine on
SSLCertificateFile cert.pem
SSLCertificateKeyFile key.pem
SSLVerifyClient none
SSLCACertificateFile ca.pem
SSLEngine on
SSLProtocol -all +TLSv1 +SSLv3
SSLCipherSuite ALL:-kEDH:-RC2:-MD5:-RC4:-DES
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
ServerName xxx.yyy.com
DocumentRoot /srv/www/xxx.yyy.com
AddDefaultCharset utf-8
<Directory "/srv/www/xxx.yyy.com/sms/" >
AddOutputFilterByType DEFLATE text/html text/plain application/xhtml+xml text/xml text/css text/rtf application/x-javascript application/json
AuthType Basic
AuthName "restricted area"
AuthBasicProvider ldap
AuthLDAPURL "ldap://authenticator.yyy.com/ou=Users,dc=yyy,dc=com?uid?sub?(objectClass=posixAccount)"
Require valid-user
</Directory>
</VirtualHost>
Original issue reported on code.google.com by [email protected]
on 11 Feb 2012 at 9:55
SSLVerifyClient didn't work with mod_spdy enabled.
The same configuration, except mod_dpdy, works as expected.
...
SSLVerifyClient require
SSLVerifyDepth 5
SSLOptions +StdEnvVars +ExportCertData +FakeBasicAuth +OptRenegotiate
SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
and %{SSL_CLIENT_I_DN_CN} eq "XXXXXXXXXXXXX" \
and %{SSL_CLIENT_S_DN_Email} in {"XXXXXXXXXXXXX", "XXXXXXXXXXXXX"} \
and %{SSL_CLIENT_S_DN_D} in {"XXXXXXXXXXXXX", "XXXXXXXXXXXXX"} \
)
...
Original issue reported on code.google.com by [email protected]
on 13 May 2012 at 6:00
I don't think the output currently frees buckets passed to it. I'm pretty
sure it should.
Original issue reported on code.google.com by [email protected]
on 21 Feb 2010 at 1:49
What steps will reproduce the problem?
1. Go to http://code.google.com/p/mod-spdy/downloads/list
What is the expected output? What do you see instead?
I expect a reference implementacion of the SPDY protocol.
Some .deb, .tar.gz, rpm file, instead i get no file, and no code.
What version of the product are you using? On what operating system?
none
Please provide any additional information below.
Is there a release date. The web need to be faster, i want to test the speed if
a compress the http headers and i dont need keepalive options any more.
Original issue reported on code.google.com by [email protected]
on 2 Aug 2010 at 8:32
Several folks have reported seeing this warning in their Apache logs:
[9179:9180:WARNING:http_to_spdy_filter.cc(113)] HttpToSpdyFilter is not the last filter in the chain: http_to_spdy
The "HttpToSpdyFilter is not the last filter in the chain" warning is issued
when there is an output filter later in the chain that the HTTP-to-SPDY
translation filter, which normally shouldn't happen. Even stranger, the above
warning indicates that the filter that comes later in the chain is the
HTTP-to-SPDY filter itself. I am not sure yet how that is happening.
Original issue reported on code.google.com by [email protected]
on 19 Apr 2012 at 9:16
I'd like mod_spdy to enable my apache to speak spdy to sites that apache is
proxying to.
Original issue reported on code.google.com by [email protected]
on 30 Mar 2012 at 9:36
Foo
Original issue reported on code.google.com by [email protected]
on 31 Jan 2010 at 1:36
What version/revision number of mod_spdy are you using?
mod-spdy-beta-0.9.1.5-301.x86_64
What version of Apache are you using, and on what operating system? (Use
`apache2ctl -v` to check.)
Server version: Apache/2.2.17 (Unix)
Server built: Oct 27 2010 12:28:30
What other Apache modules are you using? (Use `apache2ctl -M` to check.)
Loaded Modules:
core_module (static)
mpm_prefork_module (static)
http_module (static)
so_module (static)
auth_basic_module (shared)
auth_digest_module (shared)
authn_file_module (shared)
authn_alias_module (shared)
authn_anon_module (shared)
authn_dbm_module (shared)
authn_default_module (shared)
authz_host_module (shared)
authz_user_module (shared)
authz_owner_module (shared)
authz_groupfile_module (shared)
authz_dbm_module (shared)
authz_default_module (shared)
ldap_module (shared)
authnz_ldap_module (shared)
include_module (shared)
log_config_module (shared)
logio_module (shared)
env_module (shared)
ext_filter_module (shared)
mime_magic_module (shared)
expires_module (shared)
deflate_module (shared)
headers_module (shared)
usertrack_module (shared)
setenvif_module (shared)
mime_module (shared)
dav_module (shared)
status_module (shared)
autoindex_module (shared)
info_module (shared)
dav_fs_module (shared)
vhost_alias_module (shared)
negotiation_module (shared)
dir_module (shared)
actions_module (shared)
speling_module (shared)
userdir_module (shared)
alias_module (shared)
rewrite_module (shared)
proxy_module (shared)
proxy_balancer_module (shared)
proxy_ftp_module (shared)
proxy_http_module (shared)
proxy_connect_module (shared)
cache_module (shared)
suexec_module (shared)
disk_cache_module (shared)
cgi_module (shared)
ssl_module (shared)
php5_module (shared)
proxy_ajp_module (shared)
spdy_module (shared)
Syntax OK
What browser version did you use to access the mod_spdy server? On what
operating system? What flags was the browser invoked with? (For
Chrome/Chromium, go to about:version to check.)
Firefox 12
What steps will reproduce the problem?
1. Enable IO in the Apache log file
2. Restart the server
3. Look for files in the IO
What is the expected result? What do you see instead?
I expected to see a number corresponding to the number of bytes sent to the
client on the request. Instead, I saw 0.
Please provide any additional information below.
I use a custom log format that is as follows:
LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I
%O" combinediovhost
%I and %O come from mod_logio, and they report the total bytes incoming and
outcoming for the request, not just the *requested* bytes, as the usual format
would report. This is more useful for knowing how much data the server is
actually delivering.
This is extremely important for me to know exactly how many bytes are
transferred, and I was interested in knowing the effect of SPDY's compression
on IO.
Original issue reported on code.google.com by [email protected]
on 22 May 2012 at 5:47
As we have documented here:
http://code.google.com/p/mod-spdy/wiki/KnownIssues
and here:
https://www.modspdy.com/blog/2012/04/15/using-mod_spdy-with-php/
mod_php and mod_spdy may not get along well, for the same reason that mod_php
doesn't work well with the worker MPM.
When we detect mod_php in the filter chain along w/ mod_spdy, we should put a
message in the Apache error log that briefly explains this is not recommended
and link to a document (probably on developers.google.com mod_spdy site) that
explains how to configure mod_fcgid etc.
Original issue reported on code.google.com by [email protected]
on 18 Apr 2012 at 12:16
What version/revision number of mod_spdy are you using?
r243
What version of Apache are you using, and on what operating system? (Use
`apache2ctl -v` to check.)
2.2.22
What other Apache modules are you using? (Use `apache2ctl -M` to check.)
core_module (static)
mpm_worker_module (static)
http_module (static)
so_module (static)
spdy_module (shared)
actions_module (shared)
alias_module (shared)
auth_basic_module (shared)
authn_file_module (shared)
authz_host_module (shared)
authz_groupfile_module (shared)
authz_default_module (shared)
authz_user_module (shared)
autoindex_module (shared)
cgid_module (shared)
dir_module (shared)
env_module (shared)
expires_module (shared)
include_module (shared)
log_config_module (shared)
mime_module (shared)
negotiation_module (shared)
setenvif_module (shared)
ssl_module (shared)
userdir_module (shared)
fcgid_module (shared)
deflate_module (shared)
rewrite_module (shared)
proxy_module (shared)
proxy_http_module (shared)
proxy_balancer_module (shared)
cache_module (shared)
disk_cache_module (shared)
ldap_module (shared)
authnz_ldap_module (shared)
What browser version did you use to access the mod_spdy server? On what
operating system? What flags was the browser invoked with? (For
Chrome/Chromium, go to about:version to check.)
Chrome 18.0.23.1025.33
What steps will reproduce the problem?
1. Set:
SpdyMaxStreamsPerConnection 100
2. With chrome:/net-internals you can check that the max streams is still 10
What is the expected result? What do you see instead?
max streams = 100
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 19 Feb 2012 at 2:41
What steps will reproduce the problem?
1. Add the compiled to modules/ directory from apache2
2. Added Loadmodule File to Apache
3. a2enmod spdy && /etc/init.d/apache2 restart
4. Opened a SSL Connection to a specific Vhost.
What is the expected output? What do you see instead?
I hoped the spdy provided content :) But at least the connection was resetted
by the server. Log:
[Tue Jan 24 14:53:45 2012] [warn] [18412:18412:WARNING:spdy_framer.cc(619)]
Unexpectedly large frame. Spdy session is likely corrupt.
[Tue Jan 24 14:53:45 2012] [warn] [18412:18412:WARNING:spdy_framer.cc(773)]
inflate failure: -3
[Tue Jan 24 14:53:45 2012] [error] [18412:18412:ERROR:spdy_session.cc(147)]
SpdyFramer error: DECOMPRESS_FAILURE
[and on and on and on...]
What version of the product are you using? On what operating system?
I checked out the SVN Trunk (at 24th January 2012) and built it on Debian
Squeeze.
Please provide any additional information below.
I built the module from these How-To's
http://code.google.com/p/mod-spdy/wiki/GettingStarted
http://code.google.com/p/mod-spdy/wiki/HowToBuild
With help from:
http://japhr.blogspot.com/2011/04/dont-bother-with-modspdy.html
Thanks!
Original issue reported on code.google.com by [email protected]
on 24 Jan 2012 at 1:58
I notice that when I have mod_spdy installed, the entries in ssl_access.log all
report that the files being served were 0 bytes in size. When I disable
mod_spdy, I see that the reported sizes are no longer 0. Looks like we need to
debug how the size value gets set and figure out why it's zero. Perhaps this
has something to do with mod_ssl not being in the filter chain?
Original issue reported on code.google.com by [email protected]
on 16 Apr 2012 at 4:03
mod_spdy (beta_current).
Apache/2.2.22 (Ubuntu 12.04 LTS)
Loaded Modules:
core_module (static)
log_config_module (static)
logio_module (static)
mpm_prefork_module (static)
http_module (static)
so_module (static)
actions_module (shared)
alias_module (shared)
auth_basic_module (shared)
authn_file_module (shared)
authz_default_module (shared)
authz_groupfile_module (shared)
authz_host_module (shared)
authz_user_module (shared)
autoindex_module (shared)
cgi_module (shared)
deflate_module (shared)
dir_module (shared)
env_module (shared)
fcgid_module (shared)
include_module (shared)
mime_module (shared)
negotiation_module (shared)
php5_module (shared)
reqtimeout_module (shared)
rewrite_module (shared)
ruby_module (shared)
setenvif_module (shared)
spdy_module (shared)
ssl_module (shared)
status_module (shared)
suexec_module (shared)
suphp_module (shared)
Browser versions:
- Opera 11.64/12.00 - works RIGHT, cause Opera doesn't support SPDY (that's was
helpful)
- Firefox 13 [Linux/Win32]
- Google Chrome (stable) 19/20 [Linux/Win32]
What steps will reproduce the problem?
a) TinyMCE
----------
1. Install site with TinyMCE or CMS with TinyMCE.
2. Make some text.
3. Try to EDIT HyperTextLINK (comboboxes isn't filled)
or
Edit HTML source (HTML code is absent)
LOOKS LIKE, some requests from the Java Script don't pass to the server, or
don't receive an answer from him
If we turn off MOD_SPDY - all right!
Original issue reported on code.google.com by [email protected]
on 3 Jul 2012 at 5:29
What version/revision number of mod_spdy are you using?
http://mod-spdy.googlecode.com/svn/trunk/
What version of Apache are you using, and on what operating system? (Use
`apache2ctl -v` to check.)
Server version: Apache/2.2.14 (Ubuntu)
Server built: Mar 5 2012 16:41:39
What other Apache modules are you using? (Use `apache2ctl -M` to check.)
Loaded Modules:
core_module (static)
log_config_module (static)
logio_module (static)
mpm_prefork_module (static)
http_module (static)
so_module (static)
alias_module (shared)
auth_basic_module (shared)
authn_file_module (shared)
authz_default_module (shared)
authz_groupfile_module (shared)
authz_host_module (shared)
authz_user_module (shared)
autoindex_module (shared)
cgi_module (shared)
deflate_module (shared)
dir_module (shared)
env_module (shared)
mime_module (shared)
negotiation_module (shared)
php5_module (shared)
reqtimeout_module (shared)
setenvif_module (shared)
spdy_module (shared)
ssl_module (shared)
status_module (shared)
What browser version did you use to access the mod_spdy server? On what
operating system? What flags was the browser invoked with? (For
Chrome/Chromium, go to about:version to check.)
Google Chrome 20.0.1132.57 (Official Build 145807) m
OS Windows
What steps will reproduce the problem?
1. Turn on SpdyDebugUseSpdyForNonSslConnections option in spdy.conf
2. Launch Chrome with --use-spdy=no-ssl switch
3. Navigate http://localhost, then error occurs in Chrome, saying
"This Webpage is not available" with Error 337 (net::ERR_SPDY_PROTOCOL_ERROR):
Unknown error.
What is the expected result? What do you see instead?
When I test with Chrome without "--use-spdy=no-ssl" switch and navigate
original "https" address, it works well.
But, after turning on "--use-spdy=no-ssl", the error occurs.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 26 Jul 2012 at 5:49
I see the following in the logs:
[Wed Dec 21 20:22:34 2011] [warn] [25111:25154:WARNING:spdy_connection.cc(239)]
bad stream id, aborting stream
[Wed Dec 21 20:22:34 2011] [error]
[25111:25118:ERROR:spdy_to_http_filter.cc(339)] Invalid SYN_STREAM header block
in stream 83
[Wed Dec 21 20:22:34 2011] [error]
[25111:25119:ERROR:spdy_to_http_filter.cc(339)] Invalid SYN_STREAM header block
in stream 85
[Wed Dec 21 20:22:34 2011] [error]
[25111:25120:ERROR:spdy_to_http_filter.cc(339)] Invalid SYN_STREAM header block
in stream 87
[Wed Dec 21 20:22:35 2011] [error]
[25111:25121:ERROR:spdy_to_http_filter.cc(339)] Invalid SYN_STREAM header block
in stream 89
[Wed Dec 21 20:22:38 2011] [error]
[25111:25122:ERROR:spdy_to_http_filter.cc(339)] Invalid SYN_STREAM header block
in stream 91
[Wed Dec 21 20:22:45 2011] [error]
[25111:25118:ERROR:spdy_to_http_filter.cc(339)] Invalid SYN_STREAM header block
in stream 93
[Wed Dec 21 20:22:47 2011] [error]
[25111:25119:ERROR:spdy_to_http_filter.cc(339)] Invalid SYN_STREAM header block
in stream 95
[Wed Dec 21 20:23:39 2011] [error]
[25111:25120:ERROR:spdy_to_http_filter.cc(339)] Invalid SYN_STREAM header block
in stream 97
[Wed Dec 21 20:23:40 2011] [error]
[25111:25121:ERROR:spdy_to_http_filter.cc(339)] Invalid SYN_STREAM header block
in stream 99
on the client side, once this happens, I am totally hosed. I'm guessing the
decompression context is out of sync. There is a TODO(mdsteele) in the code to
decompress all frames even if we don't care about them. My hunch is that fixing
that TODO will fix this issue.
Original issue reported on code.google.com by [email protected]
on 21 Dec 2011 at 8:51
We currently do not support:
2.7.3 RST_STREAM
2.7.4 HELLO
2.7.5 NOOP
2.7.6 PING
2.7.7 GOAWAY
2.7.8 HEADERS
We need to add support for these. In addition, we should generate RST_STREAM
frames when the stream queue depth reaches a certain point.
Original issue reported on code.google.com by [email protected]
on 25 Feb 2010 at 8:36
ERROR:apache_spdy_session_io.cc(87)] ap_get_brigade failed with status 9: Bad
file descriptor
With apache 2.2.22
Original issue reported on code.google.com by [email protected]
on 10 Feb 2012 at 5:01
I added lots of CHECKs initially, but now that we're getting to the point of
having a semi-productionizable module, we need to convert these to DCHECKs
and add appropriate error handling in release builds.
Original issue reported on code.google.com by [email protected]
on 26 Feb 2010 at 1:07
What version/revision number of mod_spdy are you using?
mod-spdy-beta-0.9.2.1-332.x86_64
What version of Apache are you using, and on what operating system? (Use
`apache2ctl -v` to check.)
httpd-2.2.15-15.0.1.el6_2.1.x86_64
Server version: Apache/2.2.15 (Unix)
Server built: Feb 13 2012 18:23:33
What other Apache modules are you using? (Use `apache2ctl -M` to check.)
Loaded Modules:
core_module (static)
mpm_worker_module (static)
http_module (static)
so_module (static)
auth_basic_module (shared)
auth_digest_module (shared)
authn_file_module (shared)
authn_alias_module (shared)
authn_anon_module (shared)
authn_dbm_module (shared)
authn_default_module (shared)
authz_host_module (shared)
authz_user_module (shared)
authz_owner_module (shared)
authz_groupfile_module (shared)
authz_dbm_module (shared)
authz_default_module (shared)
ldap_module (shared)
authnz_ldap_module (shared)
include_module (shared)
log_config_module (shared)
logio_module (shared)
env_module (shared)
ext_filter_module (shared)
mime_magic_module (shared)
expires_module (shared)
deflate_module (shared)
headers_module (shared)
usertrack_module (shared)
setenvif_module (shared)
mime_module (shared)
dav_module (shared)
status_module (shared)
autoindex_module (shared)
info_module (shared)
dav_fs_module (shared)
vhost_alias_module (shared)
negotiation_module (shared)
dir_module (shared)
actions_module (shared)
speling_module (shared)
userdir_module (shared)
alias_module (shared)
rewrite_module (shared)
proxy_module (shared)
proxy_balancer_module (shared)
proxy_ftp_module (shared)
proxy_http_module (shared)
proxy_connect_module (shared)
cache_module (shared)
suexec_module (shared)
disk_cache_module (shared)
cgi_module (shared)
version_module (shared)
ssl_module (shared)
pagespeed_module (shared)
spdy_module (shared)
What browser version did you use to access the mod_spdy server? On what
operating system? What flags was the browser invoked with? (For
Chrome/Chromium, go to about:version to check.)
Firefox 13.0 beta
What steps will reproduce the problem?
Accessing a mod_spdy site with Firefox and spdy enabled in about:config,
content returned from Apache are not gzip encoded even though mod_gzip is
properly configured. Disabling spdy in Firefox resumes gzipping, as well as
accessing the spdy enabled server from Chrome.
Firefox appears to be sending the appropriate headers but the enablement of
mod_spdy specifically interferes with whether content is returned gzipped or
not.
Request:
GET /slm/login.op HTTP/1.1
Host: rally4rally.rallydev.com
User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.8; rv:13.0)
Gecko/20100101 Firefox/13.0
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip, deflate
Connection: keep-alive
Response in Firefox:
HTTP/1.1 200 OK
Cache-Control: max-age=0, no-cache
Content-Language: en-US
Content-Type: text/html; charset=utf-8
Date: Wed, 23 May 2012 23:13:41 GMT
Login-Page: true
Pragma: no-cache
Set-Cookie:
__utma=243971078.409335667.1337289589.1337289589.1337620717.2;Path=/;Expires=Thu
, 01-Jan-1970 00:00:00 GMT
__utmz="243971078.1337289589.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none)";
Path=/;Expires=Thu, 01-Jan-1970 00:00:00 GMT
JSESSIONID=;Path=/slm;Expires=Thu, 01-Jan-1970 00:00:00 GMT
Vary: Accept-Encoding
X-Mod-Pagespeed: 0.10.21.2-1601
x-mod-spdy: 0.9.2.1-332
X-Firefox-Spdy: 1
Note: Chrome is correctly returned content gzipped for the same server
Response in Chrome:
HTTP/1.1 200 OK
status:200
version:HTTP/1.1
cache-control:max-age=0, no-cache
content-encoding:gzip
content-language:en-US
content-type:text/html; charset=utf-8
date:Wed, 23 May 2012 23:14:43 GMT
login-page:true
pragma:no-cache
set-cookie:JSESSIONID=;Path=/slm;Expires=Thu, 01-Jan-1970 00:00:00 GMT
vary:Accept-Encoding
x-mod-pagespeed:0.10.21.2-1601
x-mod-spdy:0.9.2.1-332
Site to view this:
https://rally4rally.rallydev.com/slm/login.op
Original issue reported on code.google.com by [email protected]
on 23 May 2012 at 11:16
mod_php is not multi-thread safe. This is a problem with mod_spdy due to the
threaded nature of the streams. We should either scan the loaded modules at
startup or look at the modules in the chain for each stream and log (once per
module) to warn the server owner about mismatched modules, and to tell them
what they can do to address it. For instance they should use php-cgi and
mod_fcgid instead of mod_php.
Original issue reported on code.google.com by [email protected]
on 16 Feb 2012 at 1:13
This is potentially expensive and there are cheaper alternatives we can use
in many places.
Original issue reported on code.google.com by [email protected]
on 4 Feb 2010 at 10:31
Current beta x64
Apache 2.2.22 on Fedora 16
core_module (static)
mpm_prefork_module (static)
http_module (static)
so_module (static)
auth_basic_module (shared)
auth_digest_module (shared)
authn_file_module (shared)
authn_alias_module (shared)
authn_anon_module (shared)
authn_dbm_module (shared)
authn_default_module (shared)
authz_host_module (shared)
authz_user_module (shared)
authz_owner_module (shared)
authz_groupfile_module (shared)
authz_dbm_module (shared)
authz_default_module (shared)
ldap_module (shared)
authnz_ldap_module (shared)
include_module (shared)
log_config_module (shared)
logio_module (shared)
env_module (shared)
ext_filter_module (shared)
mime_magic_module (shared)
expires_module (shared)
deflate_module (shared)
headers_module (shared)
usertrack_module (shared)
setenvif_module (shared)
mime_module (shared)
dav_module (shared)
status_module (shared)
autoindex_module (shared)
info_module (shared)
dav_fs_module (shared)
vhost_alias_module (shared)
negotiation_module (shared)
dir_module (shared)
actions_module (shared)
speling_module (shared)
userdir_module (shared)
alias_module (shared)
substitute_module (shared)
rewrite_module (shared)
proxy_module (shared)
proxy_balancer_module (shared)
proxy_ftp_module (shared)
proxy_http_module (shared)
proxy_ajp_module (shared)
proxy_connect_module (shared)
cache_module (shared)
suexec_module (shared)
disk_cache_module (shared)
cgi_module (shared)
version_module (shared)
flvx_module (shared)
dav_svn_module (shared)
authz_svn_module (shared)
fcgid_module (shared)
ssl_module (shared)
php5_module (shared)
spdy_module (shared)
wsgi_module (shared)
Current Google Chrome on Windows 7 (up2date) with nog additional flags
What steps will reproduce the problem?
1. Visit https://www.in-ventid.nl/test without spdy and everything works fine
2. Visit the exact same url with spdy and error messages start appearing in the
error_log of Apache.
3. However this does not apply for support.in-ventid.nl which work the same
with and without spdy
I'd expect everything to work the same with spdy as without as it is a
transport layer and therefore should not cause any changes in the webapplication
The messages in het apache error_log are
\[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Notice: A
session had already been started - ignoring session_start() in
/home/www/public_html/modules/get/logic.php on line 23, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Stack trace:,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 1. {main}()
/home/www/public_html/bootstrap.php:0, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 2. include()
/home/www/public_html/bootstrap.php:63, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 4.
__construct() /home/www/public_html/classes/fileManager.php:9, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 4.
session_start() /home/www/public_html/bootstrap.php:23, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Notice: A
session had already been started - ignoring session_start() in
/home/www/public_html/bootstrap.php on line 23, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Stack trace:,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 1. {main}()
/home/www/public_html/bootstrap.php:0, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 2. include()
/home/www/public_html/bootstrap.php:46, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 3.
PDO->__construct() /home/www/public_html/modules/defaults.php:18, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 4.
PDO->__construct() /home/www/public_html/modules/defaults.php:18, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 5.
session_start() /home/www/public_html/bootstrap.php:23, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Notice: Constant
MODULE already defined in /home/www/public_html/bootstrap.php on line 37,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Stack trace:,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 1. {main}()
/home/www/public_html/bootstrap.php:0, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 2. include()
/home/www/public_html/bootstrap.php:46, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 3.
PDO->__construct() /home/www/public_html/modules/defaults.php:18, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 4.
PDO->__construct() /home/www/public_html/modules/defaults.php:18, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 5. define()
/home/www/public_html/bootstrap.php:37, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Fatal error:
include(): Cannot redeclare class render in
/home/www/public_html/modules/defaults.php on line 8, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Stack trace:,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 1. {main}()
/home/www/public_html/bootstrap.php:0, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 2. include()
/home/www/public_html/bootstrap.php:46, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 3.
PDO->__construct() /home/www/public_html/modules/defaults.php:18, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 4.
PDO->__construct() /home/www/public_html/modules/defaults.php:18, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 5. include()
/home/www/public_html/bootstrap.php:46, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Notice: A
session had already been started - ignoring session_start() in
/home/www/public_html/bootstrap.php on line 23, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Stack trace:,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 1. {main}()
/home/www/public_html/bootstrap.php:0, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 2. include()
/home/www/public_html/bootstrap.php:46, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 3. include()
/home/www/public_html/modules/defaults.php:11, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 4.
gethostbyname() /home/www/public_html/modules/constants.php:12, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 5.
gethostbyname() /home/www/public_html/modules/constants.php:12, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 6.
session_start() /home/www/public_html/bootstrap.php:23, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Notice: Constant
MODULE already defined in /home/www/public_html/bootstrap.php on line 37,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Stack trace:,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 1. {main}()
/home/www/public_html/bootstrap.php:0, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 2. include()
/home/www/public_html/bootstrap.php:46, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 3. include()
/home/www/public_html/modules/defaults.php:11, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 4.
gethostbyname() /home/www/public_html/modules/constants.php:12, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 5.
gethostbyname() /home/www/public_html/modules/constants.php:12, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 6. define()
/home/www/public_html/bootstrap.php:37, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Fatal error:
include(): Cannot redeclare class render in
/home/www/public_html/modules/defaults.php on line 8, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Stack trace:,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 1. {main}()
/home/www/public_html/bootstrap.php:0, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 2. include()
/home/www/public_html/bootstrap.php:46, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 3. include()
/home/www/public_html/modules/defaults.php:11, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 4.
gethostbyname() /home/www/public_html/modules/constants.php:12, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 5.
gethostbyname() /home/www/public_html/modules/constants.php:12, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 6. include()
/home/www/public_html/bootstrap.php:46, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Notice: A
session had already been started - ignoring session_start() in
/home/www/public_html/bootstrap.php on line 23, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Stack trace:,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 1. {main}()
/home/www/public_html/bootstrap.php:0, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 2. include()
/home/www/public_html/bootstrap.php:63, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 3.
fileManager->get() /home/www/public_html/modules/get/logic.php:8, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 4.
PDOStatement->execute() /home/www/public_html/classes/fileManager.php:63,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 5.
PDOStatement->execute() /home/www/public_html/classes/fileManager.php:63,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Notice: A
session had already been started - ignoring session_start() in
/home/www/public_html/bootstrap.php on line 23, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Stack trace:,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 1. {main}()
/home/www/public_html/bootstrap.php:0, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 2.
date_default_timezone_set() /home/www/public_html/bootstrap.php:25, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 3.
date_default_timezone_set() /home/www/public_html/bootstrap.php:25, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 4.
session_start() /home/www/public_html/bootstrap.php:23, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Notice: Constant
MODULE already defined in /home/www/public_html/modules/constants.php on line
12, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 3.
date_default_timezone_set() /home/www/public_html/bootstrap.php:25, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 8.
session_start() /home/www/public_html/bootstrap.php:23, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Notice: Constant
MODULE already defined in /home/www/public_html/bootstrap.php on line 37,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Stack trace:,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 1. {main}()
/home/www/public_html/bootstrap.php:0, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 2.
date_default_timezone_set() /home/www/public_html/bootstrap.php:25, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 3.
date_default_timezone_set() /home/www/public_html/bootstrap.php:25, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 4. include()
/home/www/public_html/bootstrap.php:46, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 5. include()
/home/www/public_html/modules/defaults.php:11, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 6.
gethostbyname() /home/www/public_html/modules/constants.php:12, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 7. define()
/home/www/public_html/bootstrap.php:37, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 8. define()
/home/www/public_html/bootstrap.php:37, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Fatal error:
include(): Cannot redeclare class render in
/home/www/public_html/modules/defaults.php on line 8, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Stack trace:,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 1. {main}()
/home/www/public_html/bootstrap.php:0, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 2.
date_default_timezone_set() /home/www/public_html/bootstrap.php:25, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 3.
date_default_timezone_set() /home/www/public_html/bootstrap.php:25, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 4. include()
/home/www/public_html/bootstrap.php:46, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 5. include()
/home/www/public_html/modules/defaults.php:11, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 6.
gethostbyname() /home/www/public_html/modules/constants.php:12, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 7. define()
/home/www/public_html/bootstrap.php:37, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 8. {main}()
/home/www/public_html/modules/defaults.php:0, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Notice: A
session had already been started - ignoring session_start() in
/home/www/public_html/bootstrap.php on line 23, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Stack trace:,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 1. {main}()
/home/www/public_html/bootstrap.php:0, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 2. include()
/home/www/public_html/bootstrap.php:46, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 3. include()
/home/www/public_html/modules/defaults.php:11, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 4.
gethostbyname() /home/www/public_html/modules/constants.php:12, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 5.
gethostbyname() /home/www/public_html/modules/constants.php:12, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 6.
session_start() /home/www/public_html/bootstrap.php:23, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Notice: Constant
MODULE already defined in /home/www/public_html/bootstrap.php on line 37,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Stack trace:,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 1. {main}()
/home/www/public_html/bootstrap.php:0, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 2. include()
/home/www/public_html/bootstrap.php:46, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 3. include()
/home/www/public_html/modules/defaults.php:11, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 4.
gethostbyname() /home/www/public_html/modules/constants.php:12, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 5.
gethostbyname() /home/www/public_html/modules/constants.php:12, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 6. define()
/home/www/public_html/bootstrap.php:37, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Fatal error:
include(): Cannot redeclare class render in
/home/www/public_html/modules/defaults.php on line 8, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP Stack trace:,
referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 1. {main}()
/home/www/public_html/bootstrap.php:0, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 2. include()
/home/www/public_html/bootstrap.php:46, referer: https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 3. include()
/home/www/public_html/modules/defaults.php:11, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 4.
gethostbyname() /home/www/public_html/modules/constants.php:12, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 5.
gethostbyname() /home/www/public_html/modules/constants.php:12, referer:
https://www.in-ventid.nl/test
[Mon Jul 16 15:42:45 2012] [error] [client 84.30.144.231] PHP 6. include()
/home/www/public_html/bootstrap.php:46, referer: https://www.in-ventid.nl/test
Mod_spdy is now disabled, as it also causes segfaults in the main apache
configuration:
....
7fcd76422000-7fcd76423000 r--p 00001000 fc:01 145439
/usr/lib64/httpd/modules/mod_dir.so
7fcd76423000-7fcd76424000 rw-p 00002000 fc:01 145439
/usr/lib64/httpd/modules/mod_dir.so
7fcd76424000-7fcd7642b000 r-xp 00000000 fc:01 145591
/usr/lib64/ht[Mon Jul 16 15:42:46 2012] [notice] child pid 29314 exit signal
Segmentation fault (11)
[Mon Jul 16 15:42:46 2012] [notice] child pid 29319 exit signal Segmentation
fault (11)
[Mon Jul 16 15:42:46 2012] [notice] child pid 29320 exit signal Segmentation
fault (11)
[Mon Jul 16 15:42:46 2012] [notice] child pid 29325 exit signal Segmentation
fault (11)
[Mon Jul 16 15:42:46 2012] [notice] child pid 29360 exit signal Segmentation
fault (11)
[Mon Jul 16 15:42:46 2012] [notice] child pid 29363 exit signal Segmentation
fault (11)
Original issue reported on code.google.com by [email protected]
on 16 Jul 2012 at 1:53
x-mod-spdy:0.9.1.5-301
Server version: Apache/2.2.14 (Ubuntu)
Server built: Mar 5 2012 16:42:17
Loaded Modules:
core_module (static)
log_config_module (static)
logio_module (static)
mpm_prefork_module (static)
http_module (static)
so_module (static)
alias_module (shared)
auth_basic_module (shared)
authn_file_module (shared)
authz_default_module (shared)
authz_groupfile_module (shared)
authz_host_module (shared)
authz_user_module (shared)
autoindex_module (shared)
cgi_module (shared)
deflate_module (shared)
dir_module (shared)
env_module (shared)
mime_module (shared)
evasive20_module (shared)
negotiation_module (shared)
php5_module (shared)
reqtimeout_module (shared)
setenvif_module (shared)
spdy_module (shared)
ssl_module (shared)
status_module (shared)
Syntax OK
Testing with Windows 7, Google Chrome 18.0.1025.162(Build oficial 131933) m
Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/535.19 (KHTML, like Gecko)
Chrome/18.0.1025.162 Safari/535.19
"chrome.exe" --use-spdy=npn --flag-switches-begin --flag-switches-
What steps will reproduce the problem?
1. Installed mod_spdy (last version)
2. Using RoundCube
3. Start to get strange behavior.
4. Read the logs:
[Tue Apr 17 15:11:31 2012] [notice] child pid 13626 exit signal Segmentation
fault (11)
[Tue Apr 17 15:11:31 2012] [notice] child pid 13627 exit signal Segmentation
fault (11)
[Tue Apr 17 15:11:31 2012] [notice] child pid 13628 exit signal Segmentation
fault (11)
[Tue Apr 17 15:11:50 2012] [error] [client 127.0.0.1]
[12195:12195:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
[Tue Apr 17 15:12:07 2012] [error] [client 127.0.0.1]
[13173:13173:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
[Tue Apr 17 15:12:23 2012] [error] [client 127.0.0.1]
[13172:13172:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
[Tue Apr 17 15:12:24 2012] [error] [client 127.0.0.1]
[12652:12652:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
[Tue Apr 17 15:12:25 2012] [error] [client 127.0.0.1]
[13656:13656:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
[Tue Apr 17 15:12:26 2012] [error] [client 127.0.0.1]
[13654:13654:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
[Tue Apr 17 15:12:27 2012] [error] [client 127.0.0.1]
[13652:13652:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
[Tue Apr 17 15:12:28 2012] [error] [client 127.0.0.1]
[14061:14061:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
[Tue Apr 17 15:12:29 2012] [error] [client 127.0.0.1]
[12373:12373:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
[Tue Apr 17 15:12:30 2012] [error] [client 127.0.0.1]
[14062:14062:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
[Tue Apr 17 15:12:32 2012] [error] [client 127.0.0.1]
[12194:12194:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
[Tue Apr 17 15:12:33 2012] [error] [client 127.0.0.1]
[12188:12188:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
[Tue Apr 17 15:12:35 2012] [error] [client 127.0.0.1]
[13655:13655:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
[Tue Apr 17 15:12:49 2012] [error] [client 127.0.0.1]
[13197:13197:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
[Tue Apr 17 15:12:50 2012] [error] [client 127.0.0.1]
[14034:14034:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
[Tue Apr 17 15:12:51 2012] [error] [client 127.0.0.1]
[14063:14063:ERROR:mod_spdy.cc(470)] Speculative read failed with status 20014:
Internal error
Original issue reported on code.google.com by [email protected]
on 17 Apr 2012 at 9:19
What version/revision number of mod_spdy are you using?
wget https://dl-ssl.google.com/dl/linux/direct/mod-spdy-beta_current_i386.deb
What version of Apache are you using, and on what operating system? (Use
`apache2ctl -v` to check.)
Apache/2.2.0 (Fedora) on Debian Squeeze/Sid
What other Apache modules are you using? (Use `apache2ctl -M` to check.)
I will check as soon as I get home, I do not have server access here.
At least:
- mod_rewrite
- mod_evasine
- mod_security
- mod_pagespeed
What browser version did you use to access the mod_spdy server? On what
operating system? What flags was the browser invoked with? (For
Chrome/Chromium, go to about:version to check.)
Chrome 18.0.1025.163 on OSX 10.7
What steps will reproduce the problem?
1. Login into the ISPConfig CP
What is the expected result? What do you see instead?
The CP runs without problems on normal SSL, but not with activated mod_spdy.
ISPConfig uses ajax technology to load the navigations (top-navigation as well
as sidebar-navigation). Both do not appear on spdy.
Please provide any additional information below.
If you need a demo account to access the ISPConfig CP let me know. :)
Original issue reported on code.google.com by [email protected]
on 24 Apr 2012 at 5:42
We currently use the modified Chromium base from pagespeed, but might be able
to trim the base deps even further. We need to investigate what if anything
can be trimmed from the current base deps list.
Original issue reported on code.google.com by [email protected]
on 19 Jan 2010 at 7:38
What version/revision number of mod_spdy are you using?
Revision: 265
What version of Apache are you using, and on what operating system?
Server version: Apache/2.2.22 (Unix)
Linux barney 2.6.32.57-grsec #1 SMP Thu Mar 1 19:23:31 CET 2012 i686 GNU/Linux
Debian 6.0.4 distribution
mod_spdy compiled with openssl 1.0.1beta3
What other Apache modules are you using?
Loaded Modules:
core_module (static)
log_config_module (static)
logio_module (static)
mpm_prefork_module (static)
http_module (static)
so_module (static)
authn_file_module (shared)
authn_dbm_module (shared)
authn_anon_module (shared)
authn_dbd_module (shared)
authn_default_module (shared)
authn_alias_module (shared)
authz_host_module (shared)
authz_groupfile_module (shared)
authz_user_module (shared)
authz_dbm_module (shared)
authz_owner_module (shared)
authz_default_module (shared)
auth_basic_module (shared)
auth_digest_module (shared)
file_cache_module (shared)
cache_module (shared)
disk_cache_module (shared)
mem_cache_module (shared)
dbd_module (shared)
dumpio_module (shared)
reqtimeout_module (shared)
ext_filter_module (shared)
include_module (shared)
filter_module (shared)
substitute_module (shared)
charset_lite_module (shared)
deflate_module (shared)
log_forensic_module (shared)
env_module (shared)
mime_magic_module (shared)
cern_meta_module (shared)
expires_module (shared)
headers_module (shared)
ident_module (shared)
usertrack_module (shared)
unique_id_module (shared)
setenvif_module (shared)
version_module (shared)
proxy_module (shared)
proxy_connect_module (shared)
proxy_ftp_module (shared)
proxy_http_module (shared)
proxy_scgi_module (shared)
proxy_ajp_module (shared)
proxy_balancer_module (shared)
ssl_module (shared)
mime_module (shared)
dav_module (shared)
status_module (shared)
autoindex_module (shared)
asis_module (shared)
info_module (shared)
suexec_module (shared)
cgi_module (shared)
cgid_module (shared)
dav_fs_module (shared)
dav_lock_module (shared)
vhost_alias_module (shared)
negotiation_module (shared)
dir_module (shared)
imagemap_module (shared)
actions_module (shared)
speling_module (shared)
userdir_module (shared)
alias_module (shared)
rewrite_module (shared)
What browser version did you use to access the mod_spdy server? On what
operating system? What flags was the browser invoked with?
Google Chrome 17.0.963.79 (Official Build 125985)
OS Mac OS X
WebKit 535.11 (@110140)
JavaScript V8 3.7.12.29
Flash 11.1.102.63
User Agent Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/535.11
(KHTML, like Gecko) Chrome/17.0.963.79 Safari/535.11
Command Line /Applications/Google Chrome.app/Contents/MacOS/Google Chrome
--restore-last-session --flag-switches-begin --enable-print-preview
--flag-switches-end
Executable Path /Applications/Google Chrome.app/Contents/MacOS/Google Chrome
Profile Path /Users/rickard/Library/Application Support/Google/Chrome/Default
What steps will reproduce the problem?
1. Set up PHP-FPM
2. Make a script that does <?php var_dump($_SERVER);
3. Check that the array key 'HTTPS' is missing or set to off
What is the expected result? What do you see instead?
I would expect mod_spdy to set HTTPS to "on" because of two reasons:
- The connection is encrypted
- The schema part of the URL is https://
Please provide any additional information below.
This makes some web pages act weird. The only confirmed problem so far is that
WordPress doesn't recognize the connection as HTTPS and thus loads assets using
an insecure connection, which will result in mixed content warnings.
However, I suspect that other web applications would have the same problem
since it's a common way of checking for secure/HTTPS connections.
Original issue reported on code.google.com by [email protected]
on 14 Mar 2012 at 10:01
What steps will reproduce the problem?
1. Followed the instructions on HowToBuild page
What is the expected output? What do you see instead?
Expected successful build, got this instead:
CXX(target) out/Release/obj.target/spdy_test/net/spdy/spdy_protocol_test.o
cc1plus: warnings being treated as errors
net/spdy/spdy_protocol_test.cc: In member function ‘virtual
void<unnamed>::SpdyProtocolTest_FrameStructs_Test::TestBody()’:
net/spdy/spdy_protocol_test.cc:64:3: error: converting ‘false’ to pointer
type for argument 1 of ‘char
testing::internal::IsNullLiteralHelper(testing::internal::Secret*)’
net/spdy/spdy_protocol_test.cc:70:3: error: converting ‘false’ to pointer
type for argument 1 of ‘char
testing::internal::IsNullLiteralHelper(testing::internal::Secret*)’
net/spdy/spdy_protocol_test.cc: At global scope:
net/spdy/spdy_protocol_test.cc:40:1: error:
‘<unnamed>::SpdyProtocolTest_ProtocolConstants_Test::test_info_’ defined
but not used
net/spdy/spdy_protocol_test.cc:58:1: error:
‘<unnamed>::SpdyProtocolTest_FrameStructs_Test::test_info_’ defined but not
used
net/spdy/spdy_protocol_test.cc:73:1: error:
‘<unnamed>::SpdyProtocolTest_DataFrameStructs_Test::test_info_’ defined but
not used
net/spdy/spdy_protocol_test.cc:79:1: error:
‘<unnamed>::SpdyProtocolTest_ControlFrameStructs_Test::test_info_’ defined
but not used
net/spdy/spdy_protocol_test.cc:125:1: error:
‘<unnamed>::SpdyProtocolTest_TestDataFrame_Test::test_info_’ defined but
not used
net/spdy/spdy_protocol_test.cc:168:1: error:
‘<unnamed>::SpdyProtocolTest_TestSpdySettingsFrame_Test::test_info_’
defined but not used
net/spdy/spdy_protocol_test.cc:217:1: error:
‘<unnamed>::SpdyProtocolDeathTest_TestDataFrame_Test::test_info_’ defined
but not used
net/spdy/spdy_protocol_test.cc:234:1: error:
‘<unnamed>::SpdyProtocolDeathTest_TestSpdyControlFrameStreamId_Test::test_info
_’ defined but not used
net/spdy/spdy_protocol_test.cc:249:1: error:
‘<unnamed>::SpdyProtocolDeathTest_TestSpdyControlFrameVersion_Test::test_info_
’ defined but not used
net/spdy/spdy_protocol_test.cc:270:1: error:
‘<unnamed>::SpdyProtocolDeathTest_TestSpdyControlFrameType_Test::test_info_’
defined but not used
make: *** [out/Release/obj.target/spdy_test/net/spdy/spdy_protocol_test.o]
Error 1
What version of the product are you using? On what operating system?
svn info
Path: .
URL: http://mod-spdy.googlecode.com/svn/trunk/src
Repository Root: http://mod-spdy.googlecode.com/svn
Repository UUID: 96a8b0a0-ff0d-11de-b9d1-2d015cf73129
Revision: 143
Node Kind: directory
Schedule: normal
Last Changed Author: [email protected]
Last Changed Rev: 143
Last Changed Date: 2010-10-28 07:03:59 +1000 (Thu, 28 Oct 2010)
OS: Gentoo
GCC: 4.5.2
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 12 Apr 2011 at 4:00
mod_spdy will generally only step in for HTTPS requests. A browser that
connects with HTTP can be advised that SPDY is available on another port (e.g.
443) by sending an Alternate-Protocol header with the response. We should make
mod_spdy send this header automatically for HTTP responses (when configured to
do so).
Original issue reported on code.google.com by [email protected]
on 30 Jan 2012 at 2:39
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.