HomeManager is a simple platform to manage cameras at home. HomeManager defines and controls device policies, including video streaming, motion detection, and night mode. Settings shared to a device depend on whether a user at home.

HomeManager is a solution designed for personal use at the private network (i.e., without access from the internet). The software might not be ready for production usage due to a lack of security focus during development. Use at your own risk.

HomeManager supports Xiaomi Xiaofang 1S cameras flashed with the custom firmware and Mikrotik routers. However, it should be possible to use other camera models without server-side changes or with minimal adaptation. Also, almost any router allowing execution of shell commands could work (e.g., models operated by OpenWRT). But if you are going to use any devices except Mikrotik and Xiaomi Xiaofang 1S, you need to adapt the client scripts.

• Edit homemanager.service, ffmpeg-rtsp-hls.path, ffmpeg-rtsp-hls.service and save to /etc/systemd/system.
• Copy homemanager/conf.default.py to homemanager/conf.py and edit conf.py.

# dnf install python3-tornado python3-aiopg python3-psycopg2 python3-astral python3-pynacl
# systemctl enable --now ffmpeg-rtsp-hls.path
$ ./db_manage.py init
$ ./db_manage.py router-add -n mikrotik
$ ./db_manage.py camera-add -n camera1 -p /path/to/video.m3u8 -a /path/from/ffmpeg-rtsp-hls.path
# systemd enable --now homemanager.service
$ ./db_manage.py token-add -n mikrotik
$ ./db_manage.py token-add -n camera1
$ ./db_manage.py user-add -u username

• Edit scripts/mikrotik_script
• Add the script to Mikrotik
  • Winbox: System - Scripts - plus, enter check_device to "Name" field, enter script's content to "Source" field, Ok
• Set scheduler
  • Winbox: System - Scheduler - plus, enter run_check_device to name field, set interval 00:05:00 ('00:10:00' equals to 10 mins, '00:01:00' equals to 1 min), enter /system script run check_device into "On Event" field
  • Terminal: /system scheduler add name=run_check_device interval=10m on-event=check_device

• Edit scripts/camera_module
• Put scripts/camera_module, scripts/camera_setup_script and scripts/camera_startup_script to /system/sdcard/config/userscripts
• Put scripts/camera_motion_script to /system/sdcard/config/userscripts/motiondetection
• Append /system/sdcard/config/userscripts/camera_startup_script to the end of /system/sdcard/run.sh
• Run /system/sdcard/config/userscripts/camera_startup_script
• Add /system/sdcard/config/userscripts/camera_setup_script to crontab
  • # crontab -c /system/sdcard/config/cron/crontabs -e
  • Append */5 * * * * /system/sdcard/config/userscripts/camera_setup_script > /system/sdcard/config/userscripts/camera_setup_log - in this example the command executes every 5 minutes and saves the last configuration json to the log file.

Cameras require swap for motion detection. See this issue. Note, script/camera_startup_script includes all required steps. If you followed the installation instructions, additional actions are not required.

• Set NOTIFICATIONS_SETTINGS['telegram'] = True in homemanager/conf.py
• Register your bot
• Set correct TELEGRAM_SETTINGS['bot_id'] in homemanager/conf.py
• Add the bot to a chat
• Set TELEGRAM_SETTINGS['chat_id'] in homemanager/conf.py (check https://api.telegram.org/bot<bot_id>/getUpdates, look for a chat_id in logs once you have added the bot to the chat)
• Enter proxies to TELEGRAM_SETTINGS['proxy'] if telegram is blocked in your region

Mikrotik firewall

/ip firewall filter add chain=forward src-address=camera_ip dst-address=!192.168.1.0/24 action=drop comment="Drop 
tries to reach the internet from ip camera (local network is allowed)"

mount -o remount,rw /system/sdcard

Check this issue.

• Python and Tornado
• PostgreSQL and psycopg2, aiopg
• ffmpeg
• pynacl
• Astral
• Bootstrap
• HLS.js

HomeManager is free and opensource software. Check LICENSE for details.

Bundled libraries: Bootstrap - MIT, HLS.js - Apache 2.0.