Screen goes blank when battery is connected about lilygo-epd47 HOT 8 OPEN

Hello, have you solved your issue?

from lilygo-epd47.

I also have this problem. The unit works when plugged into USB, but if you install a 18650 battery, the screen slowly goes blank. There are a few missing passive components next to the + terminal, could that be the issue? I have not removed any components from this board.

from lilygo-epd47.

I have the same problem. I can confirm the battery is of type 18650 and fully charged. How can I fix that?

from lilygo-epd47.

Are you sure the battery is making contact with the battery terminals you need to bend them in quite some way to ensure contact, especially if you have the flat top 18650 type of battery.

from lilygo-epd47.

Thanks for the tip. Yes, I have bend the terminals pretty far so that the battery makes contact. I can also verify that all ESP32 functions (such as GPIO ports, WiFi, etc.) work flawlessly - it's only the display that does not work.

EDIT: This might sound very stupid but I have again tried to bend the terminals so that it definitely makes contact with the battery and now the display works flawlessly. I don't know if previously it was just not contacting enough so that it only had enough power for the processor but not the display - but it's working for me now.

from lilygo-epd47.

@Schnabulation Did this issue ever return for you? I have two of these boards, and both are now displaying the same symptoms - blank display when battery inserted (with or without external power), but work fine when just powered from USB. I've played with the battery terminals, but to no avail.

from lilygo-epd47.

Actually this was fixed by bending the terminals and never returned.

from lilygo-epd47.

Actually this was fixed by bending the terminals and never returned.

@Schnabulation Thanks (and I've just realised that you also responded earlier on the other thread too!)

Today, I soldered on an 18650 holder to the battery terminals and, lo and behold, it all works fine now:

I can't work out whether the battery clips are just not very good conductors, or the tension of the battery is upsetting something else on the board, but desoldering them and replacing with this is an easy, quick fix for me and if it turns out reliable (as it seems to be now), then it'll do for me!

from lilygo-epd47.