ns-radius is a radius server to simulate the two-factor authentication for netscaler.

It designed for testing below two scenarios:

• Two-Factor authentication like VipToken or RSAToken
• SMS passcode/token validation as a second factor

Recommend deploy ns-radius using docker, there is a AUTOMATED BUILD on docker hub.

https://hub.docker.com/r/xenme/ns-radius/

Supported tags:

• latest: This is based on official nodejs docker image
• minimal: This is based on alpine image, compressed docker file only have 13MB, recommended.

1. Add a radius server point to your docker container and use port 1812/udp
2. The hard coded secret is 2003.r2
3. Create a policy and bind to NetScaler Gateway Virtual Server，then test

scenario 1: For Two-Factor like VipToken/RSAToken

• Enter 000000 as password 2 to simulate a failed/incorrect token
• Enter 888888 as password 2 to simulate a successful/correct token

scenario 2: SMS passcode/token

1. leave password 2 as blank or enter anything except 000000 and 888888, then login to simulate the request
2. if user info successfully authenticate via LDAP, netscaler will redirect to the page to validate SMS passcode/token
3. Enter 888888 to simulate a success token, anything else ns-radius will resend challenge again.

建议通过docker方式部署，目前在docker hub上有AUTOMATED BUILD

https://hub.docker.com/r/xenme/ns-radius/

支持的docker tags

• latest: 基于nodejs官方docker image制作
• minimal: 基于alpine image制作，大小只有13MB（而latest至少在250MB+），推荐使用该镜像

1. 添加一个radius server指向docker container，端口为1812，目前只支持UDP
2. radius secret目前代码中硬编码，为 2003.r2
3. 创建policy并bind到NetScaler Gateway Virtual Server之后进行测试

场景1： 模拟类似VipToken/RSAToken场景

• 使用000000 作为 password2 来模拟 错误 token
• 使用888888 作为 password2 来模拟 正确 token

场景2: 短信验证码场景

1. password2 留空 或者输入除 000000以及888888 以外的任何内容
2. 如果用户名和密码验证成功，将跳转到短信验证码验证界面
3. 输入 888888 来模拟正确的验证码，任何其他内容模拟错误的验证码。（注：验证码验证失败的话，真实环境会重新生成一个新的验证码，但目前模拟场景不会）