Fuse-ext2 is a EXT2/EXT3/EXT4 Filesystem support for FUSE.
Fuse-ext2 requires at least Fuse version 2.6.0 for Linux. For Mac OS X latest version of OSXFuse 2.7.5.
Dependencies:
# fuse
$ apt-get install libfuse
Build from source depends on:
- m4
- autoconf
- automake
- libtool
- fuse-dev
- e2fsprogs-dev
$ apt-get install m4 autoconf automake libtool
$ apt-get install libfuse-dev e2fslibs-dev
$ ./autogen.sh
$ ./configure
$ make
$ sudo make install
You can use checkinstall
or some other equivalent tool to generate install
package for your distribution.
Dependecies:
OSXfuse io no need to install with MacFuse compatibility.
The easiest way is using Homebrew:
brew install e2fsprogs m4 automake autoconf libtool
CFLAGS="-idirafter/$(brew --prefix e2fsprogs)/include -idirafter/usr/local/include/osxfuse" LDFLAGS="-L$(brew --prefix e2fsprogs)/lib" ./configure
make
sudo make install
Build:
Build from source depends on:
- m4
- autoconf
- automake
- libtool
- e2fsprogs
export PATH=/opt/gnu/bin:$PATH
mkdir gnu
cd gnu
# m4
curl -O http://ftp.gnu.org/gnu/m4/m4-1.4.17.tar.gz
tar -zxvf m4-1.4.17.tar.gz
cd m4-1.4.17
./configure --prefix=/opt/gnu
make -j 16
sudo make install
cd ../
# autoconf
curl -O http://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz
tar -zxvf autoconf-2.69.tar.gz
cd autoconf-2.69
./configure --prefix=/opt/gnu
make
sudo make install
cd ../
# automake
curl -O http://ftp.gnu.org/gnu/automake/automake-1.15.tar.gz
tar -zxvf automake-1.15.tar.gz
cd automake-1.15
./configure --prefix=/opt/gnu
make
sudo make install
cd ../
# libtool
curl -O http://ftpmirror.gnu.org/libtool/libtool-2.4.6.tar.gz
tar -zxvf libtool-2.4.6.tar.gz
cd libtool-2.4.6
./configure --prefix=/opt/gnu
make
sudo make install
cd ../
# e2fsprogs
curl -O https://www.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/v1.42.12/e2fsprogs-1.42.12.tar.gz
tar -zxvf e2fsprogs-1.42.12.tar.gz
cd e2fsprogs-1.42.12
./configure --prefix=/opt/gnu
make
sudo make install
sudo make install-libs
cd ../
# fuse-ext2
export PATH=/opt/gnu/bin:$PATH
./autogen.sh
CFLAGS="-idirafter/opt/gnu/include -idirafter/usr/local/include/osxfuse/" LDFLAGS="-L/opt/gnu/lib -L/usr/local/lib" ./configure
make
sudo make install
dd if=/dev/zero of=test/fs.ext2 bs=1024 count=102400
mkfs.ext4 test/fs.ext2
fuse-ext2 test/fs.ext2 /mnt/fs.ext2 -o debug,rw+
See Man page for options.
Usage: fuse-ext2 <device|image_file> <mount_point> [-o option[,...]]
Options: ro, force, allow_others
Please see details in the manual.
Example: fuse-ext2 /dev/sda1 /mnt/sda1
- Multithread support is broken for now, so forcing fuse to work single thread.
- there are no known bugs for read-only mode, read only mode should be ok for every one.
- although, write support is available please do not mount your filesystems with write support unless you do not have anything to loose.
Please send output the output of below command while reporting bugs as GitHub Issue. Before submitting a bug report, please look at the existing issues first.
$ /usr/local/bin/fuse-ext2 -v /dev/path /mnt/point -o debug
Please do not use comma ,
in partition labels.
Wrong: e2label /dev/disk0s3 "linux,ext3"
Correct: e2label /dev/disk0s3 "linux-ext3"
Alper Akcan [email protected]