-
Cutting edge,openwrt官方master分支版本,内核升级到5.4. 与官方最新源码同步.
-
原生极致纯净,固件默认只包含基础上网功能,后台在线选装插件,自建插件仓库囊括了市面上主流开源插件,系统升级不丢失插件和配置.
-
性能,友好度,易用性,插件,以及针对国内特殊环境等的自定义优化
-
uhttpd替换为nginx,大大增加可玩性(只针对X64设备):
- Nginx+PHP+MariaDB, 用于搭建FileRun,可道云等云盘,建站等.
- 通过nginx实现Webdav 自建共享同步网盘神器
- nginx反向代理 实现后台每个页面与服务都可通过自定义域名访问
-
内置AdguardHome搭配SmartDNS综合优化方案, 开箱即用,实现恶意网站过滤+区分国内外域名解析加速+ 防污染+ DNS优选 (需在后台安装luci-app-adguardhome和luci-app-smartdns,K2P只需安装luci-app-smartdns)
-
无需专业知识,无需linux服务器,人人皆可通过云编译定制编译自己的专属固件.
-
持续更新, 每周日零点定时自动云编译更新固件,不用再担心因停更而需更换固件.
-
SSL兼容,可同时使用http IP访问和绑定域名开启https访问(只针对X64设备)
固件下载 Releases,每周日更新固件.
后台入口 10.0.0.1 (若后台无法打开,请插拔交换wan,lan网线顺序.)
默认密码 root
第一次使用请采用全新安装,避免出现升级失败以及其他一些可能的Bug.
云编译需要 在此 创建个token,然后在此仓库Settings->Secrets中添加个名字为REPO_TOKEN的Secret,填入token值,否者无法release
在仓库Settings->Secrets中分别添加 PPPOE_USERNAME, PPPOE_PASSWD 可设置默认拨号账号密码.
Secrets中添加 SCKEY 可通过Server酱 推送编译结果到微信
Secrets中添加 TELEGRAM_CHAT_ID, TELEGRAM_TOKEN 可推送编译结果到Telegram Bot. 教程
编译触发方式:
diy云编译教程: Read the details in my blog (in Chinese) | 中文教程
- Opkg 软件包管理
- UPNP 自动端口转发
- Turbo ACC 网络加速
其他插件请自行在 后台->软件包 中安装,系统升级不会丢失插件.每次系统升级完成连接网络后,会自动安装所有已自选安装的插件.
- 不要用 root 用户 git 和编译!!!
- 国内用户编译前请准备好梯子,使用大陆白名单或全局模式
-
首先装好 Ubuntu 64bit,推荐 Ubuntu 18 LTS x64
-
命令行输入
sudo apt-get update
,然后输入sudo apt-get -y install build-essential asciidoc binutils bzip2 gawk gettext git libncurses5-dev libz-dev patch python2.7 unzip zlib1g-dev lib32gcc1 libc6-dev-i386 subversion flex uglifyjs gcc-multilib g++-multilib p7zip p7zip-full msmtp libssl-dev texinfo libglib2.0-dev xmlto qemu-utils upx libelf-dev autoconf automake libtool autopoint device-tree-compiler ccache xsltproc rename antlr3 gperf curl
-
首次编译执行脚本(以x64为例):
#!/bin/bash
rm -Rf openwrt Actions-OpenWrt-Nginx
git clone https://github.com/openwrt/openwrt
git clone https://github.com/garypang13/Actions-OpenWrt-Nginx
cp -Rf Actions-OpenWrt-Nginx/* openwrt/
cd openwrt
if [ -f "common/feeds.conf" ]; then
(
mv common/feeds.conf ./
)
fi
if [ -f "x86_64/feeds.conf" ]; then
(
mv x86_64/feeds.conf ./
)
fi
./scripts/feeds update -a
if [ -n "$(ls -A "common/files" 2>/dev/null)" ]; then
cp -rf common/files files
fi
if [ -n "$(ls -A "x86_64/files" 2>/dev/null)" ]; then
cp -rf x86_64/files/* files/
fi
if [ -f "common/diy.sh" ]; then
(
chmod +x common/diy.sh
/bin/bash "common/diy.sh"
)
fi
if [ -f "x86_64/diy.sh" ]; then
(
chmod +x x86_64/diy.sh
/bin/bash "x86_64/diy.sh"
)
fi
if [ -f "common/default-settings" ]; then
cp -f common/default-settings package/*/*/default-settings/files/zzz-default-settings
fi
if [ -f "x86_64/default-settings" ]; then
cp -f x86_64/default-settings package/*/*/default-settings/files/zzz-default-settings
fi
if [ -n "$(ls -A "common/diy" 2>/dev/null)" ]; then
cp -Rf common/diy/* ./
fi
if [ -n "$(ls -A "x86_64/diy" 2>/dev/null)" ]; then
cp -Rf x86_64/diy/* ./
fi
if [ -n "$(ls -A "common/patches" 2>/dev/null)" ]; then
find "common/patches" -type f -name '*.patch' | xargs -i git apply {}
fi
if [ -n "$(ls -A "x86_64/patches" 2>/dev/null)" ]; then
find "x86_64/patches" -type f -name '*.patch' | xargs -i git apply {}
fi
mv x86_64/.config .config
make defconfig
- 二次编译执行脚本
#!/bin/bash
rm -Rf Actions-OpenWrt-Nginx && git clone https://github.com/garypang13/Actions-OpenWrt-Nginx
cp -Rf Actions-OpenWrt-Nginx/* openwrt/
cd openwrt
rm -Rf feeds package/feeds tmp
[ -f ".config" ] && mv .config .config.bak
svn co https://github.com/openwrt/openwrt/trunk/package
git fetch --all
git reset --hard origin/master
./scripts/feeds update -a
if [ -n "$(ls -A "common/files" 2>/dev/null)" ]; then
cp -rf common/files files
fi
if [ -n "$(ls -A "x86_64/files" 2>/dev/null)" ]; then
cp -rf x86_64/files/* files/
fi
if [ -f "common/diy.sh" ]; then
(
chmod +x common/diy.sh
/bin/bash "common/diy.sh"
)
fi
if [ -f "x86_64/diy.sh" ]; then
(
chmod +x x86_64/diy.sh
/bin/bash "x86_64/diy.sh"
)
fi
if [ -n "$(ls -A "common/diy" 2>/dev/null)" ]; then
cp -Rf common/diy/* ./
fi
if [ -n "$(ls -A "x86_64/diy" 2>/dev/null)" ]; then
cp -Rf x86_64/diy/* ./
fi
if [ -f "common/default-settings" ]; then
cp -f common/default-settings package/*/*/default-settings/files/zzz-default-settings
fi
if [ -f "x86_64/default-settings" ]; then
cp -f x86_64/default-settings package/*/*/default-settings/files/zzz-default-settings
fi
if [ -n "$(ls -A "common/patches" 2>/dev/null)" ]; then
find "common/patches" -type f -name '*.patch' | xargs -i git apply {}
fi
if [ -n "$(ls -A "x86_64/patches" 2>/dev/null)" ]; then
find "x86_64/patches" -type f -name '*.patch' | xargs -i git apply {}
fi
[ -f ".config.bak" ] && mv .config.bak .config || mv x86_64/.config .config
make defconfig
-
如需修改默认配置比如定制插件等,请执行
make menuconfig
-
执行
make -j8 download v=s
下载dl库 -
执行
make -j$(($(nproc)+1)) || make -j1 V=s
即可开始编译你要的固件了。
Build OpenWrt using GitHub Actions
- Sign up for GitHub Actions
- Fork this GitHub repository
- click the
Star
button, and the build will starts automatically.Progress can be viewed on the Actions page. - When the build is complete, click the
Artifacts
button in the upper right corner of the Actions page to download the binaries.