An Arduino compaible board based on the ATMEGA328PB that uses the secondary SPI bus provided by the 328 to interface with 256k of SRAM. There are two aditional AVRs on borad, both are ATTINY85 microcontrollers. The 85s share the SRAM with the 328. The 85s' each have four GPIO pins broken out. In order to implement this functionality, bus switches were used to multiplex the SPI bus and GPIO of each 85.
An ATMEGA16u2 was used as a USB to serial tranceiver. Right now, support for the 328pb is limited, a patch for the pb is needed for avrdude, and the Arduino IDE requires an extra board to be installed.
MISO and MOSI on the Tinys are labeled with respect to the host, where the tiny is a slave.(fixed)SS_328 is not connected to the SS line of the RAM.(fixed)- The PCB does not yet reflect the changes marked fixed. corrected.
- Flash the U2:
Running parts 1 and 2 together did not work for me. It could be that the fuses need to be written before the flash can be programmed properly. Use the same command up to the -U
in part 1 for part 2.
-
sudo avrdude -p m16u2 -c usbtiny -U lfuse:w:0xFF:m -U hfuse:w:0xD9:m -U efuse:w:0xF4:m -U lock:w:0x0F:m -v
-
flash:w:/home/paul/.arduino15/packages/arduino/hardware/avr/1.6.11/firmwares/atmegaxxu2/arduino-usbserial/Arduino-usbserial-atmega16u2-Uno-Rev3.hex
-
Right now, the 328pb is not supported by avrdude. To fix this, put this snippet in your
/etc/avrdude.conf
file. A copy of the fixed file is included. If you trust me, runsudo cp avrdude.conf /etc/avrdude.conf
in the root of this repo.
The Ugolino was first created as an intern project while I was working at Thimble.io, and I have recieved permission to publish this work publicly.