withgallantry / fbcp-ili9341 Goto Github PK

@withgallantry @juj @Manawyrm @joonamo @ I'm relatively sure I'm having the same problem as issue #112 except I'm using the Adafruit 1.14" ST7789. However, I didn't quite understand the fix. This is what I get when I run fbcp.
bcm_host_get_peripheral_address: 0xfe000000, bcm_host_get_peripheral_size: 25165824, bcm_host_get_sdram_address: 0xc0000000 BCM core speed: current: 333333333hz, max turbo: 500000000hz. SPI CDIV: 30, SPI max frequency: 16666667hz Allocated DMA channel 7 Allocated DMA channel 1 Enabling DMA channels Tx:7 and Rx:1 DMA hardware register file is at ptr: 0xb532d000, using DMA TX channel: 7 and DMA RX channel: 1 DMA hardware TX channel register file is at ptr: 0xb532d700, DMA RX channel register file is at ptr: 0xb532d100 Resetting DMA channels for use DMA all set up Initializing display Resetting display at reset GPIO pin 24 Creating SPI task thread InitSPI done DISPLAY_FLIP_ORIENTATION_IN_SOFTWARE: Swapping width/height to update display in portrait mode to minimize tearing. Relevant source display area size with overscan cropped away: 768x1360. Source GPU display is 768x1360. Output SPI display is 240x240 with a drawable area of 240x240. Applying scaling factor horiz=0.18x & vert=0.18x, xOffset: 52, yOffset: 0, scaledWidth: 136, scaledHeight: 240 Creating dispmanX resource of size 136x240 (aspect ratio=0.566667). GPU grab rectangle is offset x=0,y=0, size w=136xh=240, aspect ratio=0.566667 All initialized, now running main loop...

Orientation looks good, I got rid of the data on top, but how do I get the display to correctly fit the screen?