virtme-ng is a tool that allows to easily and quickly recompile and test a Linux kernel, starting from the source code.
It allows to recompile the kernel in few minutes (rather than hours), then the kernel is automatically started in a virtualized environment that is an exact copy-on-write copy of your live system, which means that any changes made to the virtualized environment do not affect the host system.
In order to do this a minimal config is produced (with the bare minimum support to test the kernel inside qemu), then the selected kernel is automatically built and started inside qemu, using the filesystem of the host as a copy-on-write snapshot.
This means that you can safely destroy the entire filesystem, crash the kernel, etc. without affecting the host.
Kernels produced with virtme-ng are lacking lots of features, in order to reduce the build time to the minimum and still provide you a usable kernel capable of running your tests and experiments.
virtme-ng is based on virtme, written by Andy Lutomirski [email protected] (web | git).
$ uname -r
5.19.0-23-generic
$ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
$ cd linux
$ vng --build --commit v6.2-rc4
...
$ vng
_ _
__ _(_)_ __| |_ _ __ ___ ___ _ __ __ _
\ \ / / | __| __| _ _ \ / _ \_____| _ \ / _ |
\ V /| | | | |_| | | | | | __/_____| | | | (_| |
\_/ |_|_| \__|_| |_| |_|\___| |_| |_|\__ |
|___/
kernel version: 6.2.0-rc4-virtme x86_64
$ uname -r
6.2.0-rc4-virtme
^
|___ Now you have a shell inside a virtualized copy of your entire system,
that is running the new kernel! \o/
Then simply type "exit" to return back to the real system.
- Debian / Ubuntu
You can install the latest stable version of virtme-ng via:
$ sudo apt install virtme-ng
- Ubuntu ppa
If you're using Ubuntu, you can install the latest experimental version of virtme-ng from ppa:arighi/virtme-ng:
$ sudo add-apt-repository ppa:arighi/virtme-ng
$ sudo apt install --yes virtme-ng
- Install from source
To install virtme-ng from source you can clone this git repository and build a standalone virtme-ng running the following commands:
$ git clone --recurse-submodules https://github.com/arighi/virtme-ng.git
$ BUILD_VIRTME_NG_INIT=1 pip3 install --verbose -r requirements.txt .
If you are in Debian/Ubuntu you may need to install the following packages to build virtme-ng from source properly:
$ sudo apt install python3-pip python3-argcomplete flake8 pylint \
cargo rustc qemu-system-x86
In recent versions of pip3 you may need to specify --break-system-packages
to
properly install virtme-ng in your system from source.
- Run from source
You can also run virtme-ng directly from source, make sure you have all the
requirements installed (optionally you can build virtme-ng-init
for a faster
boot, by running make
), then from the source directory simply run any
virtme-ng command, such as:
$ ./vng --help
-
You need Python 3.8 or higher
-
QEMU 1.6 or higher is recommended (QEMU 1.4 and 1.5 are partially supported using a rather ugly kludge)
- You will have a much better experience if KVM is enabled. That means that you should be on bare metal with hardware virtualization (VT-x or SVM) enabled or in a VM that supports nested virtualization. On some Linux distributions, you may need to be a member of the "kvm" group. Using VirtualBox or most VPS providers will fall back to emulation.
-
Depending on the options you use, you may need a statically linked
busybox
binary somewhere in your path. -
Optionally, you may need virtiofsd 1.7.0 (or higher) for better filesystem performance inside the virtme-ng guests.
- Build a kernel from a clean local kernel source directory (if a .config is not available virtme-ng will automatically create a minimum .config with all the required feature to boot the instance):
$ vng -b
- Build tag v6.1-rc3 from a local kernel git repository:
$ vng -b -c v6.1-rc3
- Generate a minimal kernel .config in the current kernel build directory:
$ vng --kconfig
- Run a kernel previously compiled from a local git repository in the current working directory:
$ vng
- Run an interactive virtme-ng session using the same kernel of the host:
$ vng -r
- Test installed kernel 6.2.0-21-generic kernel (NOTE: /boot/vmlinuz-6.2.0-21-generic needs to be accessible):
$ vng -r 6.2.0-21-generic
- Run a pre-compiled vanilla v6.6 kernel fetched from the Ubuntu mainline builds repository (useful to test a specific kernel version directly and save a lot of build time):
$ vng -r v6.6
- Download and test kernel 6.2.0-1003-lowlatency from deb packages:
$ mkdir test
$ cd test
$ apt download linux-image-6.2.0-1003-lowlatency linux-modules-6.2.0-1003-lowlatency
$ for d in *.deb; do dpkg -x $d .; done
$ vng -r ./boot/vmlinuz-6.2.0-1003-lowlatency
- Build the tip of the latest kernel on a remote build host called "builder", running make inside a specific build chroot (managed remotely by schroot):
$ vng --build --build-host builder \
--build-host-exec-prefix "schroot -c chroot:kinetic-amd64 -- "
- Run the previously compiled kernel from the current working directory and enable networking:
$ vng --network user
- Run the previously compiled kernel adding an additional virtio-scsi device:
$ qemu-img create -f qcow2 /tmp/disk.img 8G
$ vng --disk /tmp/disk.img
- Recompile the kernel passing some env variables to enable Rust support (using specific versions of the Rust toolchain binaries):
$ vng --build RUSTC=rustc-1.62 BINDGEN=bindgen-0.56 RUSTFMT=rustfmt-1.62
- Build the arm64 kernel (using a separate chroot in /opt/chroot/arm64 as the main filesystem):
$ vng --build --arch arm64 --root /opt/chroot/arm64/
- Execute
uname -r
inside a kernel recompiled in the current directory and send the output to cowsay on the host:
$ vng -- uname -r | cowsay
__________________
< 6.1.0-rc6-virtme >
------------------
\ ^__^
\ (oo)\_______
(__)\ )\/\
||----w |
|| ||
- Run a bunch of parallel virtme-ng instances in a pipeline, with different kernels installed in the system, passing each other their stdout/stdin and return all the generated output back to the host (also measure the total elapsed time):
$ time true | \
> vng -r 5.19.0-38-generic -e "cat && uname -r" | \
> vng -r 6.2.0-19-generic -e "cat && uname -r" | \
> vng -r 6.2.0-20-generic -e "cat && uname -r" | \
> vng -r 6.3.0-2-generic -e "cat && uname -r" | \
> cowsay -n
___________________
/ 5.19.0-38-generic \
| 6.2.0-19-generic |
| 6.2.0-20-generic |
\ 6.3.0-2-generic /
-------------------
\ ^__^
\ (oo)\_______
(__)\ )\/\
||----w |
|| ||
real 0m2.737s
user 0m8.425s
sys 0m8.806s
- Run the vanilla v6.7-rc5 kernel with an Ubuntu 22.04 rootfs:
$ vng -r v6.7-rc5 --user root --root ./rootfs/22.04 --root-release jammy -- cat /etc/lsb-release /proc/version
...
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=22.04
DISTRIB_CODENAME=jammy
DISTRIB_DESCRIPTION="Ubuntu 22.04.3 LTS"
Linux version 6.7.0-060700rc5-generic (kernel@kathleen) (x86_64-linux-gnu-gcc-13 (Ubuntu 13.2.0-7ubuntu1) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.41) #202312102332 SMP PREEMPT_DYNAMIC Sun Dec 10 23:41:31 UTC 2023
- Run the current kernel creating a 1GB NUMA node with CPUs 0,1,3 assigned and a 3GB NUMA node with CPUs 2,4,5,6,7 assigned:
$ vng -r -m 4G --numa 1G,cpus=0-1,cpus=3 --numa 3G,cpus=2,cpus=4-7 -- numactl -H
available: 2 nodes (0-1)
node 0 cpus: 0 1 3
node 0 size: 1005 MB
node 0 free: 914 MB
node 1 cpus: 2 4 5 6 7
node 1 size: 2916 MB
node 1 free: 2797 MB
node distances:
node 0 1
0: 10 20
1: 20 10
- Run
glxgears
inside a kernel recompiled in the current directory:
$ vng -g -- glxgears
(virtme-ng is started in graphical mode)
- Execute an
awesome
window manager session with kernel 6.2.0-1003-lowlatency (installed in the system):
$ vng -r 6.2.0-1003-lowlatency -g -- awesome
(virtme-ng is started in graphical mode)
- Run the
steam
snap (tested in Ubuntu) inside a virtme-ng instance using the 6.2.0-1003-lowlatency kernel:
$ vng -r 6.2.0-1003-lowlatency --snaps --net user -g -- /snap/bin/steam
(virtme-ng is started in graphical mode)
- Run virtme-ng inside a docker container:
$ docker run -it ubuntu:22.04 /bin/bash
# apt update
# echo 'debconf debconf/frontend select Noninteractive' | debconf-set-selections
# apt install --yes git qemu-kvm udev iproute2 busybox-static \
coreutils python3-requests libvirt-clients kbd kmod file rsync zstd udev
# git clone --recursive https://github.com/arighi/virtme-ng.git
# ./virtme-ng/vng -r v6.6 -- uname -r
6.6.0-060600-generic
See also: .github/workflows/run.yml
as a practical example on how to use
virtme-ng inside docker.
virtme-ng allows to automatically configure, build and run kernels using the
main command-line interface called vng
.
A minimal custom .config
is automatically generated if not already present
when --build
is specified.
It is possible to specify a set of custom configs (.config chunk) in
~/.config/virtme-ng/kernel.config
, these user-specific settings will override
the default settings (except for the mandatory configs that are required to
boot and test the kernel inside qemu, using virtme-run
).
Then the kernel is compiled either locally or on an external build host (if the
--build-host
option is used); once the build is done only the required files
needed to test the kernel are copied from the remote host if an external build
host is used.
When a remote build host is used (--build-host
) the target branch is force
pushed to the remote host inside the ~/.virtme
directory.
Then the kernel is executed using the virtme module. This allows to test the kernel using a safe copy-on-write snapshot of the entire host filesystem.
All the kernels compiled with virtme-ng have a -virtme
suffix to their kernel
version, this allows to easily determine if you're inside a virtme-ng kernel or
if you're using the real host kernel (simply by checking uname -r
).
It is possible to recompile and test out-of-tree kernel modules inside the virtme-ng kernel, simply by building them against the local directory of the kernel git repository that was used to build and run the kernel.
Typically, if you always use virtme-ng with an external build server (e.g.,
vng --build --build-host REMOTE_SERVER --build-host-exec-prefix CMD
) you
don't always want to specify these options, so instead, you can simply define
them in ~/.config/virtme-ng/virtme-ng.conf
under default_opts
and then
simply run vng --build
.
Example (always use an external build server called 'kathleen' and run make
inside a build chroot called chroot:lunar-amd64
). To do so, modify the
default_opts
sections in ~/.config/virtme-ng/virtme-ng.conf
as following:
"default_opts" : {
"build_host": "kathleen",
"build_host_exec_prefix": "schroot -c chroot:lunar-amd64 --"
},
Now you can simply run vng --build
to build your kernel from the current
working directory using the external build host, prepending the exec prefix
command when running make.
- If you get permission denied when starting qemu, make sure that your
username is assigned to the group
kvm
orlibvirt
:
$ groups | grep "kvm\|libvirt"
- When using
--network bridge
to create a bridged network in the guest you may get the following error:
...
failed to create tun device: Operation not permitted
This is because qemu-bridge-helper
requires CAP_NET_ADMIN
permissions.
To fix this you need to add allow all
to /etc/qemu/bridge.conf
and set
the CAP_NET_ADMIN
capability to qemu-bridge-helper
, as following:
$ sudo filecap /usr/lib/qemu/qemu-bridge-helper net_admin
-
If the guest fails to start because the host doesn't have enough memory available you can specify a different amount of memory using
--memory MB
, (this option is passed directly to qemu via-m
, default is 1G). -
If you're testing a kernel for an architecture different than the host, keep in mind that you need to use also
--root DIR
to use a specific chroot with the binaries compatible with the architecture that you're testing.If the chroot doesn't exist in your system virtme-ng will automatically create it using the latest daily build Ubuntu cloud image:
$ vng --build --arch riscv64 --root ./tmproot
- If the build on a remote build host is failing unexpectedly you may want to try cleaning up the remote git repository, running:
$ vng --clean --build-host HOSTNAME
-
Snap support is still experimental and something may not work as expected (keep in mind that virtme-ng will try to run snapd in a bare minimum system environment without systemd), if some snaps are not running try to disable apparmor, adding
--append="apparmor=0"
to the virtme-ng command line. -
Running virtme-ng instances inside docker: in case of failures/issues, especially with stdin/stdout/stderr redirections, make sure that you have
udev
installed in your docker image and run the following command before usingvng
:
$ udevadm trigger --subsystem-match --action=change
Please see DCO-1.1.txt.
virtme-ng is written by Andrea Righi [email protected]
virtme-ng is based on virtme, written by Andy Lutomirski [email protected] (web | git).