Weight Measuring Component Hello Marius This is the repository where you can find the requested circuit. Because some of the device features were not specified in your message, such as:
- Sampling rate
- Communication protocol for communication between sensors and microcontroller.
- How to program the microcontroller and display the data.
- Type of power supply to be used
- Where the data will be displayed
- Operating voltage
- EMI-EMC
Thanks to this lack of information, I took certain liberties in the design of the circuit, such as:
- Sampling rate will be 1k samples per second
- The communication protocol will be I2C between the sensor and the microcontroller.
- The microcontroller will be programmed through the usb port (micro USB connection). Data can be displayed using an OLED I2C panel or a computer, via the micro USB port.
- This device will be able to work with at least two cell Lipo batteries (up to 3 cells 3S). as well as an external power supply or via a micro USB cable.
- The data can be displayed using an OLED panel compatible with I2C communication or a computer through the USB port.
- The input voltage range is from 4.5 to 21V.
- mask on top and bottom layer.
I apologize in advance for taking so long to send the circuit, but from Thursday of last week to Tuesday of this week I was traveling. It was fun doing this circuit and I hope you like it.