This is the project repo for the final project of the Udacity Self-Driving Car Nanodegree: Programming a Real Self-Driving Car.

This package contains the waypoint updater node: waypoint_updater.py. The purpose of this node is to update the target velocity property of each waypoint based on traffic light and obstacle detection data. This node will subscribe to the /base_waypoints, /current_pose, /obstacle_waypoint, and /traffic_waypoint topics, and publish a list of waypoints ahead of the car with target velocities to the /final_waypoints topic.

Carla is equipped with a drive-by-wire (dbw) system, meaning the throttle, brake, and steering have electronic control. This package contains the files that are responsible for control of the vehicle: the node dbw_node.py and the file twist_controller.py, along with a pid and lowpass filter that you can use in your implementation. The dbw_node subscribes to the /current_velocity topic along with the /twist_cmd topic to receive target linear and angular velocities. Additionally, this node will subscribe to /vehicle/dbw_enabled, which indicates if the car is under dbw or driver control. This node will publish throttle, brake, and steering commands to the /vehicle/throttle_cmd, /vehicle/brake_cmd, and /vehicle/steering_cmd topics.

This package contains the traffic light detection node: tl_detector.py. This node takes in data from the /image_color, /current_pose, and /base_waypoints topics and publishes the locations to stop for red traffic lights to the /traffic_waypoint topic.

The /current_pose topic provides the vehicle's current position, and /base_waypoints provides a complete list of waypoints the car will be following.

You will build both a traffic light detection node and a traffic light classification node. Traffic light detection should take place within tl_detector.py, whereas traffic light classification should take place within ../tl_detector/light_classification_model/tl_classfier.py.

Please use one of the two installation options, either native or docker installation.

• Be sure that your workstation is running Ubuntu 16.04 Xenial Xerus or Ubuntu 14.04 Trusty Tahir. Ubuntu downloads can be found here.

• If using a Virtual Machine to install Ubuntu, use the following configuration as minimum:

  • 2 CPU
  • 2 GB system memory
  • 25 GB of free hard drive space

  The Udacity provided virtual machine has ROS and Dataspeed DBW already installed, so you can skip the next two steps if you are using this.

• Follow these instructions to install ROS

  • ROS Kinetic if you have Ubuntu 16.04.
  • ROS Indigo if you have Ubuntu 14.04.

• Dataspeed DBW

  • Use this option to install the SDK on a workstation that already has ROS installed: One Line SDK Install (binary)

• Download the Udacity Simulator.

Install Docker

Build the docker container using docker-compose

docker-compose build

Access to the docker using docker-compose

docker-compose exec ros bash

To set up port forwarding, please refer to the instructions from term 2

1. Clone the project repository

git clone https://github.com/udacity/CarND-Capstone.git

2. Install python dependencies

cd CarND-Capstone
pip install -r requirements.txt

3. Make and run styx

cd ros
catkin_make
source devel/setup.sh
roslaunch launch/styx.launch

4. Run the simulator

1. Download training bag that was recorded on the Udacity self-driving car.
2. Unzip the file

unzip traffic_light_bag_file.zip

3. Play the bag file

rosbag play -l traffic_light_bag_file/traffic_light_training.bag

4. Launch your project in site mode

cd CarND-Capstone/ros
roslaunch launch/site.launch

5. Confirm that traffic light detection works on real life images