vksysd / p4_int Goto Github PK

Hello, I tried to reproduce your network, but in the file run.sh exit a file to unzip tar -czf build / p4app.tgz * --exclude = 'build', but in your git there is no such file: p4app.tgz
Could you make me available to do some tests? I need to do research studies, and I'm learning how to use p4lang and INT as well.

Thank you very much for your attention,

Euclides.

Hi, good morning, can you help me? Because in the test that I am working on I can not make the system work properly, because I do not know how to use the * .py commands below, since I can only generate send packets, receive packets do not generate and consequently do not generate the network analysis when I use this program. Can you help me?

euclidesfjr@kaxassa:~/P03/P4_INT-ORIGINAL/P4_INT/INT_headerstack$ ls -lrt *.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 1035 Jan 12 17:54 original_send.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 3272 Jan 12 17:54 original_receive.py
-rw-rw-r-- 1 euclidesfjr euclidesfjr 713 Jan 12 17:54 cpu_plot.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 5202 Jan 12 17:54 receive_udp.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 12874 Jan 12 17:54 receive_udp_no_packets_h1.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 14269 Jan 12 17:54 receive_udp_multithreaded_h2.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 14661 Jan 12 17:54 receive_udp_multithreaded_h1.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 4554 Jan 12 17:54 receive_tcp.py
-rw-rw-r-- 1 euclidesfjr euclidesfjr 8052 Jan 12 17:54 receive_tcp_normaldist.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 8052 Jan 12 17:54 receive_tcp_normaldist_original.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 8282 Jan 12 17:54 receive_tcp_multithreaded.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 330 Jan 12 17:54 process_deq.py
-rw-rw-r-- 1 euclidesfjr euclidesfjr 345 Jan 12 17:54 print_packets.py
-rw-rw-r-- 1 euclidesfjr euclidesfjr 2555 Jan 12 17:54 populate_sx_xommands_file.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 391 Jan 12 17:54 tcp_single_send.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 492 Jan 12 17:54 tcp_single_receive.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 1938 Jan 12 17:54 send_udp.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 3354 Jan 12 17:54 send_udp_normaldist.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 1424 Jan 12 17:54 send_tcp.py
-rwxrwxr-x 1 euclidesfjr euclidesfjr 3370 Jan 12 17:54 send_tcp_normaldist.py
-rw-rw-r-- 1 euclidesfjr euclidesfjr 225 Jan 12 17:54 send_tcp_flows.py

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Because I can not generate * .pcap files for IN (input), only OUT (output). Can you help me? Since I can not get the network to communicate between IP addresses.

Hi, good afternoon, I explored all of your code that is available on this portal, but I realized that the system does not change the results, I tried to configure it to increase some links with bandwidth and make connections between hosts, but I could not. How can I do so I can connect the hosts and change the bandwidth in this scenario? Well I would like to do some tests with other bandwidth and with less switches.

Thanks alot,

Euclides.

HI,I have a problem about the implemente the INT environment，in the p4lang(github.com/p4lang) has some project about the INT,I want to know which project is perfect to install the INT?

Hi ,
I would like to know how to run this repository.
I had successfully run up the mininet but I can't ping each host successfully.

Thanks a lot , wish you can help me.