delete-cluster deletes all resources in hetzner-cloud project! about hetzner-k3s HOT 4 CLOSED

I am very sorry about this. I have added a check so that only servers with the label "cluster" set to the cluster name are deleted. I haven't come across this issue before because during my testing I have always been working with a new empty project, which is recommended anyway to separate things with different purposes.

Did you have off site backups?

from hetzner-k3s.

It's ok, it was just my lab project where I'm experimenting and I have no offsite backups for the other vms. So I got lucky. However I intend to use this in my company's hetzner cloud. That would have been very bad.
So I'll experiment a little bit more then to make sure nothing bad will happen. I might need some customization also. So this is an opportunity to have some experience with ruby.

On the other hand, thank you for your work overall, I like it. I thought already that you were only using an empty project. For my special setup I'll need an additional router in the project (Mikrotik here, could also be OpenSense) which provides site-to-site vpn for the cluster then. Access to the cluster should only be possible through internal addresses. Everything what is needed from outside will go over a load balancer. The Mikrotik router was already there and perfectly configured. However it took me only 30 minutes to set it up again.

I need also the network to be configurable since I don't want to use 10.0.0.0/16, I'll try that myself.

from hetzner-k3s.

I see why you need to keep both that and the cluster in the same project. It should be fine now since like I said it only deletes servers with the expected label, so as long as you don't use the same label for your other servers, it should be safe.

from hetzner-k3s.

Hi, I'm closing this since the problem reported shouldn't occur anymore thanks to the labels. Let me know if you still have problems with this.

from hetzner-k3s.