This is a platform agnostic Rust driver for the MCP4725, based on the embedded-hal traits.

The Microchip MCP4725 is a low-power, high accuracy, single channel, 12-bit buffered voltage output Digital-to-Analog Convertor (DAC) with non-volatile memory (EEPROM).

Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/22039d.pdf

• Support generation of DAC output using Fast Mode Write Command
• Support writing DAC Input register and EEPROM
• Support RESET command
• Test on Raspberry Pi

From examples/linux_raspi.rs:

extern crate linux_embedded_hal as linux_hal;
extern crate mcp4725_rs;

use linux_hal::{Delay, I2cdev};
use mcp4725_rs::MCP4725;

fn main() {
    println!("Hello, MCP4725!");
    println!();
    println!("Generating sawtooth wave signal on DAC output...");

    let dev = I2cdev::new("/dev/i2c-1").unwrap();
    let address = 0x60;

    let mut dac = MCP4725::new(dev, address, Delay).unwrap();
    
    loop {
        for dac_code in 0..4096 {
            dac.set_dac_value(dac_code);
        }
    }
}

Build the example on Raspberry PI

cargo build --examples

Licensed under either of

• Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
• MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT) at your option.