urkman / s3xy-watch-for-tesla Goto Github PK

Das einmal ausgewählte Fahrzeug im Account sollte auch bei App Neustart beibehalten werden. Das ausgewählte Fahrzeug sollte ebenso an die Watch App synchronisiert werden.
Nur das ausgewählte Fahrzeug sollte dann aktualisiert/ abgefragt werden

Today, when I fired up the watch app, I was greeted with the 'bad file descriptor' prompt from the last action (see other report). clicked it away, pressed refresh as I usually do to wake up the car.

and I got an error that's not even in the logs: 'Error. Your Tesla dows not answer, so the latest known data is shown'. For starters, there's a type, it's now 'dows', it's 'does'. But after clicking that away, the car was nonetheless shown as online, so I started climate. Another error appeared (didn't capture that).. it's not in the logs either. And somehow the climate quick action didn't seem active. I finally checked in the phone app, which showed that everything was okay, car online, climate active.

In the garage, I could then use the watch app normally to unlock the charge port. Here are the logs. Imho, they lack a bit of info. E.g. for a refresh, maybe it would be helpful to know what has changed (difference between previous status and status that was just fetched), so we'd know why sometimes after calling an action the status isn't correct.

Interestingly enough, the logs don't seem to be ordered by date, there's a 'Got notification from server' from 14:32:04 that seems to be out of sequence. Also the logs have a type, too: 'check vehcile state' should be 'check vehicle state'

`2023-04-07 14:28:02 Watch refresh
get latest data

2023-04-07 14:28:17 Watch climate
check vehcile state

2023-04-07 14:28:19 Server climate
send call to server

2023-04-07 14:28:19 Server climate
Error: invalid bearer token

2023-04-07 14:28:19 Watch climate
returning to device

2023-04-07 14:28:19 Watch climate
send call to phone

2023-04-07 14:28:24 Phone none
reloadWidgets

2023-04-07 14:28:26 Watch refresh
get latest data

2023-04-07 14:28:55 Watch climate
check vehcile state

2023-04-07 14:28:55 Watch climate
fire command

2023-04-07 14:28:58 Watch refresh
get latest data

2023-04-07 14:28:59 Phone none
reloadWidgets

2023-04-07 14:28:59 Watch none
App inactive

2023-04-07 14:29:11 Watch none
App active

2023-04-07 14:29:12 Phone none
reloadWidgets

2023-04-07 14:29:12 Watch none
App inactive

2023-04-07 14:29:12 Watch refresh
get latest data

2023-04-07 14:29:21 Watch none
App active

2023-04-07 14:29:23 Phone none
reloadWidgets

2023-04-07 14:29:23 Watch none
App inactive

2023-04-07 14:29:32 Watch none
App active

2023-04-07 14:29:33 Phone none
reloadWidgets

2023-04-07 14:29:33 Watch none
App inactive

2023-04-07 14:29:39 Watch none
App active

2023-04-07 14:29:42 Phone none
reloadWidgets

2023-04-07 14:29:42 Watch none
App inactive

2023-04-07 14:30:27 Watch none
App active

2023-04-07 14:30:29 Watch refresh
get latest data

2023-04-07 14:30:30 Phone none
reloadWidgets

2023-04-07 14:30:30 Watch none
App inactive

2023-04-07 14:30:37 Watch none
App active

2023-04-07 14:30:37 Phone none
reloadWidgets

2023-04-07 14:30:37 Watch none
App inactive

2023-04-07 14:32:04 Server none
Got Notification from Server

2023-04-07 14:31:46 Phone none
reloadWidgets

2023-04-07 14:31:46 Watch none
App inactive

2023-04-07 14:31:46 Watch none
App active

2023-04-07 14:31:47 Watch refresh
get latest data

2023-04-07 14:31:47 Watch chargePort
check vehcile state

2023-04-07 14:31:47 Watch chargePort
fire command

2023-04-07 14:31:49 Phone none
reloadWidgets

2023-04-07 14:31:49 Watch none
App inactive
`

Oh, last but not least: I would not show the bearer token in the settings nor give the ability to copy. That's sensitive data after all.

I have an iOS Shortcut for the charging port that shall change to the next status when running: Cable connected->unlock; port closed->open; port open->close

It doesn't work anymore since some days. Maybe since the last update of the app?

When cable is disconnected, the shortcut work and will close or open the port. Just the unlock part doesn't work when cable is connected and locked.

Hi all.
When submitting a climate control i get this issue.
Thank you for any help.

Das Auto mit Herbeirufen (EAP/FSD vorausgesetzt) aus einer Parklücke steuern.
Pfeile für's vorwärts und rückwärts fahren implementieren.

that's most important is
Siri and watch keyless,that's amazing . Thanks

Als „optisch weitsichtiger“ Mensch hätte ich noch eine „kleine“ Bitte;
Kann man die Schrift der Komplikation auf der Apple Watch beim Watchface „Metropolis“ etwas grösser darstellen (bei S3XY → Batterie), wie z.Bsp. von der „Watch for Tesla“ App, siehe mein Screenshot (Watch V7 45er), oben links „Watch for Tesla“ unten links „S3XY“

Ich würde mich über die Möglichkeit freuen, die Startseite der App konfigurierbar zu machen.

Vorschlag:
die einzelnen Punkte (Fahrzeugstatus, Laden, Klima, Fahrten usw.) sind über Schieberegler ein- und ausblendbar. Zusätzlich ist die Reihenfolge in der Darstellung auf dem Bildschirm) manuell sortierbar.

Beim Start und Ende eines Softwareupdates des Tesla erscheint jeweils eine Meldung zum Ladeport. Ich konnte nur einen Screenshot von der Meldung beim Ende des Updates erstellen. Beim Start des Updates ist die Meldung ähnlich oder gleich.

When I “add Tesla image” using the Tesla website and then copying the url into the app nothing happens I.e the image remains as the stock image.

Expected behaviour:

Complications are shown with a descriptive label, such as "open trunk", "open doors" or whatever.

Current behaviour:

With watch face california labels only include the car name ("Yellow" in my case) but no description:

On the watch configurator some labels are shown, some are not shown. Sometimes labels appear only after scrolling:

Working example:

Not working example:

Version

App: 1.0 (20)
Watch Model: Apple Watch SE 44"
Watch Software: 9.1

Funktionen wie Ladeport öffnen funktionieren, jedoch wird der Ladestand nicht aktualisiert (ist 1 Woche alt).

Whenever I get home, I plug in my car, then use the watch app to stop charging. 2 days ago, I did that as usual, and I apparently didn't wait long enough to get the result (never got a notification from the app either, but I saw in the car screen that charging had indeed stopped). Then today when I used the watch app again, I got the 'Bad file descriptor' error. Here's the relevant logs

`2023-04-05 20:07:06 Phone none
reloadWidgets

2023-04-05 20:07:06 Watch none
App inactive

2023-04-05 20:07:07 Watch none
App active

2023-04-05 20:07:08 Watch refresh
get latest data

2023-04-05 20:07:13 Watch stopCharging
check vehcile state

2023-04-05 20:07:13 Watch stopCharging
fire command

2023-04-05 20:07:15 Phone none
reloadWidgets

2023-04-05 20:07:15 Watch none
App inactive

2023-04-05 20:07:26 Watch refresh
get latest data

2023-04-05 20:08:34 Watch refresh
get data

2023-04-05 20:08:34 Watch none
App active

2023-04-05 20:08:35 Phone none
reloadWidgets

2023-04-05 20:08:35 Watch none
App inactive

2023-04-05 20:08:48 Watch none
App active

2023-04-05 20:08:48 Watch stopCharging
call error: The operation couldn’t be completed. Bad file descriptor
`

I don't have a fixed schedule when I drive to work. So, when I plug in my car in the evening, I use the watch to stop charging unless I really want the car to charge. At present I need to swipe left in the Watch App, select charging, scroll down and press the button to stop charging after plugging in at home.
With a quick action, I'd just open the watch and press the button and bone done with it.

Hey,
hier die zwei Feature-Wünsche/Verbesserungsvorschläge aus dem TFF:
In der Batterie-Komplikation ein %-Zeichen hinzufügen und die Option die Reichweite mit einzublenden wie auch in der App.
VG

App displays wrong language based on current location.

Seit heute fehlt das Fahrzeugbild. Es wurde kein eigenes Bild gesetzt sondern der Standard beibehalten.