iSpindel does not connect to CraftBeerPi about ispindel HOT 4 CLOSED

You would need to analyze your stack trace, there is an howto on the esp/arduino project. I cant analyze it since you are using your own compiled version.

from ispindel.

Also get your temperature sensor working before digging deeper, might be related.

from ispindel.

Hi,

I took the Wemos board off the the "main" board, so it could not "see" the DS18B20. With the wemos board back on the main board, it sensed the DS18B20.

Here is the stack trace. I hope it can be of any help:

stack>>>
3fff1170: 00000009 00000000 00000002 4020df7c
3fff1180: 3fff016c 00000000 3fff016c 3fff1200
3fff1190: 3fff016c 0000000a 00000003 40213216
3fff11a0: 00000009 00000000 3ffe8dc3 40215848
3fff11b0: 00000002 00000000 00000001 00000033
3fff11c0: 3ffe8dc3 3ffeff5e 3fff016c 4021301d
3fff11d0: 3ffe8dc3 3fff1200 3ffeff5e 00000033
3fff11e0: 3ffe8dc3 3ffeff5e 3fff016c 40213030
3fff11f0: 3ffe8dc3 3ffeff5e 3fff016c 4020e374
3fff1200: 3ffe9a48 9f03a8c0 feefeffe 00000000
3fff1210: feefeffe feefeffe feefeffe feefeffe
3fff1220: feefeffe feefeffe feefeffe 3fff0228
3fff1230: 3fffdad0 00000000 3fff0220 402141fc
3fff1240: feefeffe feefeffe 3fff0230 4010070c
<<<stack<<<

Decoding 8 results
0x4020df7c: uploadData(unsigned char) at /home/frank/Projects/Arduino/iSpindel/iSpindel00/iSpindel00.ino line 357
0x40213216: Print::print(unsigned long, int) at /usr/local/arduino-1.8.1/hardware/esp8266com/esp8266/cores/esp8266/Print.cpp line 87
0x40215848: Print::write(unsigned char const*, unsigned int) at /usr/local/arduino-1.8.1/hardware/esp8266com/esp8266/cores/esp8266/Print.cpp line 87
0x4021301d: Print::write(char const*) at /usr/local/arduino-1.8.1/hardware/esp8266com/esp8266/cores/esp8266/Print.cpp line 87
0x40213030: Print::print(char const*) at /usr/local/arduino-1.8.1/hardware/esp8266com/esp8266/cores/esp8266/Print.cpp line 87
0x4020e374: setup at /home/frank/Projects/Arduino/iSpindel/iSpindel00/iSpindel00.ino line 676
0x402141fc: loop_wrapper at /usr/local/arduino-1.8.1/hardware/esp8266com/esp8266/cores/esp8266/core_esp8266_main.cpp line 57
0x4010070c: cont_norm at /usr/local/arduino-1.8.1/hardware/esp8266com/esp8266/cores/esp8266/cont.S line 109

I also found in Globals.h 'CraftbeepPi'. Shouldn't that be 'CraftbeerPi'? Is it a typo? Or is it on purpose?

I changed it in the code (iSpindel00.ino and Globals.h). That's all I changed in the code. The rest is as is from the git pull request.

Cheers,

Frank

from ispindel.

Hi guys, I am running CBPI 3.0 but I can not get iSpindel conected. It shows 0 SG, 0 V and 0 °C. Any ideas what can be wrong?

from ispindel.