MathWorks Petalinux build repository for generating Zynq SoC SD card images.

• ZCU111 Evaluation Kit - built with Petalinux 2018.3
• ZCU216 Evaluation Kit - built with Petalinux 2020.2

• Clone this repository and switch tags to the corresponding version. The most up to date tag for RFSoC is mathworks_zynqrfsoc_R21.1.1. The last set numbers of the tag "R21.1.0" is interperted as MATLAB R2021a where "R21" represents R2021 and "1.0" is for release 'a'. Version "2.0" would represent 'b'.

$ git checkout mathworks_zynqrfsoc_R21.1.0

• Setup the petalinux environment in your terminal (ie: $ source /local/petalinux/settings.sh).

  Ensure you are using /bin/bash before calling this. Note that the version of Petalinux will matter here. Please use a matching Petalinux version described in the above board list.

• In the project directory, change directories to the board of interest then run the build command. As an example:

$ cd zcu111

$ petalinux-build

• After the build has succeeded, to create the SD image, run the helper script below

$ mw_package_binaries.sh

• A directory with the following files should appear

$ ls mw_zcu111_2020-12-29_01-27-32/

BOOT.BIN
system.bit
devicetree.dtb
Image
uramdisk.image.gz

• Copy these files over to your SD card and boot the evaluation board