tyler58546 / pmp-a330-fbw-compatibility Goto Github PK

Since the update from the A320 NEO updated yesterday, the PMP A330 mod has stopped working. One can hear the system starting up, EXT PWR connected but NO DISPLAY.

Other issues:

1.  LS (Right side) doesn't ACTIVATE when clicked on
   

2.  Cruising speed is up to M.82 (OVERSPEEDING) until manually select to M.80 
   

3.  At climb, the throttle doesn't stay into position when select CL
   

4. Taxi lights - One of them not working
   

Thanks again for your support.

Eric

The altitude limit and the speed limits seem to be based on the a320. The a330 has an altitude and speed limit much much higher than the a320.

I installed dev version 08bc870 of FBW now all screens show up blank after powering up EXT or APU. I have try removing all mods but yours, FBW, and A330 and still blank screens. FBW by itself is not blank, and A330 by itself is also not blank.

Attempting to put in a squawk code does not change the value in the transponder. All other operations appear to function

Most button doesn't work....I don't know why??

When entering the cruise altitude on the MCDU, the limit seems to be for the a320, it doesn't allow you to enter an altitude higher than 39,000. It should be modified to allow altitudes higher than FL390.

Using Dev version of FBW a320 (0635dfe) the top panel of the PMP A330 is not able to be interacted with at all save the lights, beacon etc.

Hi,

There is an issue with the way speed is displayed on the PFD. Right after take off it indicates that the airplane is in overspeed while this is not actually the case.

Also during cruise at mach 0.82, an overspeed master warning is shown.

Other than that great job!

Hello Tyler, but I found out that once I get up to around FL400, it will say on the ECAM that the 'Cabin is in decompression' or some sort of warning similar to that.

The reason that causes this MIGHT me the A32nx maximum altitude. (FL390)

Thanks for making this mod!

Mod seems to double lift of the aircraft: I had to change the lift from the aircraft file.
Altitude limit in the MCDU uses the one from the a320. it does not allow anything above 39,000

It does not work with the custom autopilot branch.

Whenever the frequency of the VOR is entered and the Nav Display is set to show the VOR, nothing happens and the VORs do not show up at the bottom of the ND

The aircraft works fine other than that all the displays (PFD MFD etc.) are black.

Hey,

In cruise, when exceeding mach 0.82, the master warning overspeed is being displayed which should not happen at such speed with this aircraft. It does not seem to affect performances of the aircraft but rather be a display issue. I am guessing this may be due to the fact that the performances of the A320 mod are being used as a reference when displaying the overspeed master warning.

Hope this is something that you would be able to fix!

Many thanks in advance!

Please make a p2F compatibility mod

I am having issues with my MCDU is all black screen, How can I get it to work.
sending you a link so you can take a look at it.
https://youtu.be/_myOSvnnxNE

Hi there,
I updated FBW (twice, april 10 2021 and april 12 2021) and no surprise, A330 wasn't working properly (black screens).
I uninstalled FBW A32NX then, and also A330 and compatibility mod, I re-installed all in order (FBW A32NX, A330 then A330 compatibility folder) but screens are still black. I think this simply doesn't work with the FBW update.
I know I shouldn't update the A32NX as A330 was working with that version without making a backup, but does anyone knows how to fix that please ? or should we wait for a compatibility mod update to fly again the A330 ?
Is there any way to go back to previous version of A32NX development version ?
In advance, thanks a lot.

Hi, Thank you so much for this mod!

On the latest version, the take off page under PERF is not allowing me to enter anything such as flaps and Vspeeds. I'm sure it's already been brought up, but I wanted to let you know if not. The other pages such as approach appear to be working.

Thanks and have a good day/night!

2 FMC works more

The pfd display is blank other displays work

Hey,

Thanks for the new version, looks much better!

I am reporting an issue related to speed brakes. When expanded to 50% in flight, it is no longer possible to retract them (even after landing).

Steps to reproduce:

• Launch any flight
• Start descent
• Use speed brakes at 50%
• Speed brakes do not retract anymore and can only be extended to 100%
• Even after landing they still do not retract (and can obviously not be armed for landing either)

Hope this is something you will be able to fix and thanks a lot in advance!

I used this aircraft yesterday on the fbw stable version for the A32NX and I found that when taking off and engaging the Autopilot, the aircraft followed the flight plan to start with but as it apporoached its first turn, the aircraft continued its turn and didnt straighten up with accordance to the flight plan that was punched in to the flight management system, Nav was selected and autopilot was engaged, any ideas? Also i have noticed that the strobe lights don't work either

Hi
the mod don't works with 0.70 stable version of FBW 32 NX

The Vertical Speed control knob not working in FBW A320 and PMP A330 when using this compatibility mod.

When trying to put any values into the ZFW on the init page, it says out of range/not allowed for any value. Presumably because of A320 values with A330 specs conflict.

A330 v0.2.2 with 0.6.3 FBW Stable Flood Light not working in Cockpit Lower panels. The lights are fine without the mod. No wipers either

The current version is not applicable to FBW0.5.4

Hello, thanks for your work on this project. I am no longer able to select the F-PLN page on the MCDU. I have the recent mod and the latest dev version from FBW. Thanks.

some fuel pumps stay off even if I click on it, impossible to start engines even with CTRL E

Hi!

I have the A320 FBW installed, and the compatibility mod, all screens work except the MCDU. I only see som white arrows up, down and side to side. No text or nothing.. Any ideas...

Idk if this is a PMP issue but the fuel consumption is VERY inaccurate. The plane consumes very little fuel.

A32NX most recent Dev Version installed alongside the most recent A330 compatibility mod and all screens including FMS are fully blank, Throttle does not move, Button lights are always on and most buttons do not work only a few brightness switches do.

Today i have fresh install of the msfs2020 on the PC. Only in the Community Folder: PMP A330-300, pmp-a330-fbw-compatibility and the flybywire A320 Stable 0.61 Version. On the Airbus Overhead Battery has 0 Volt and the Screens are all black. Can you help??

I'm not sure if this bug is actually caused by the stable 0.6.1 version of the FBW A32NX or the 0.3.2 version of the compatibility mod, but for some reason the PERF page isn't working like it's working with A32NX or the regular PMP A330 (version 0.2), it's just completely non-interactive with no way to calculate or add manually your V-speeds, configure flaps settings, trans altitude, flex temp etc. It did work for me at some point, but I'm now unable to replicate the conditions where it worked correctly. For me this is pretty much the only major bug that I would hope to get fixed as soon as possible. I'm of course willing to provide some additional information and proper testing if needed.

Not getting any callouts.

After the update from yesterday all display instruments are dark,
I have tried FBW Expirimental and also alternative "A32NX-master-cfbw-cap"
Any soloution for this?

Hello there. I have just started flying this aircraft and I realized there are other issues not mentioned or that I have read about.

1. The zero fuel weight (ZFW/ZFWCG) when clicks on gives an error of "Out of range" until much smaller number is enter such as 77.5/29.1 in order to move forward.
2. As soon as airborne, aircraft indicates "Overspeed" and when also cruising, same error.
3. TOD doesn't automatically start even pre-altitude reduction.
4. Others as you have already mentioned are sounds and wing flex etc

Thanks for all your support to the community. It is highly appreciated.

Regards,
Eric