I used the LayerFused X301 build videos as a guide for assembling this and configuring the firmware. The video series is here on youtube.

The specific videos that deal with the motion system are parts 2-4. LayerFused also has Wiki with a printing guide.

The MakersMashup Discord is also available to talk with other makers or myself.

E5PCXY Front:

E5PCXY Back:

E5PCXY Left:

E5PCXY Right:

E5PCXY Bed Struts:

1. Struts to deal with the cantilevered design issues with the bed having too much play.

• I recomend PETG/Carbon Fiber for the struts. Specifically Atomic Filament or similar brand that uses carbon fiber strands versus carbon fiber grounds.

2. 2020 Snap in cable clips

3. Ender 5 Toolbox

4. Cable protection for electronics box

5. 4x Brackets to relocate the power supply to the back

6. Bed Strain Relief

7. CoreXY conversion parts printed via the LayerFused X301 Parts:

• LayerFused Store:
  • affiliate link
  • non-affiliate link
• print your own:
  • LayerFused BitBucket
    • 1x - Mainboard Mount
    • 1x - XY Motor Bracket Left
    • 1x - XY Motor Bracket Right
    • 2x - XY Bracket Top Teeth Smooth
    • 2x - XY Bracket Top Smooth
    • 1x - Rear Pulley Bracket Right
    • 1x - Rear Pulley Bracket Left
    • 2x - Rear Corner Brackets
    • 1x - Display Case
    • 1x - XY Bracket Bottom Left
    • 1x - XY Bracket Bottom Right
    • 1x - Volcano Part Cooling Duct
    • 1x - Part Cooling Fan Mount
    • 1x - Carriage Plate
    • 2x - Carriage Belt Clamps
    • 1x - Carriage Belt Body
    • 1x - Rear Cable Mount

1. Buck converter from 24v to 5v 3A
2. Raspberry Pi + SD Card for OctoPrint
3. [BLTouch with 2M extension cable](https://www.amazon.com/gp/
4. Upgrade Landy PSU with a Meanwell 350w PSU

1. SKR 1.4 Turbo
2. 4x TMC2209 product/B07FR2LLZP/)
3. 4x 400mm 2020 extrusion
4. Inside Connector L Bracket
5. BMG Style Geared Extruder (Opens on right side)
6. VolcanoStyle hotend (2 options - if LayerFused, skip 7/8):
   • LayerFused - (affiliate link)
   • Zyltech
7. Microswiss Plated Volcano heatbreak
8. Authentic E3Dv6 Volcano block
9. Various M3/M5 T-nuts and regular nuts.
10. Pancake Stepper Motor
11. Aluminum Alloy T Slot L Shape Joining Plate w/ (50)M5x8 Hex Screws & (50) T-Nuts
12. GT2 Belt (At least 5Meters)
13. 6x - GT2 5mm Bore 6mm Width Aluminum Timing Belt Idler Pulley
14. 2x - GT2 5mm Bore 6mm Width Aluminum Timing Belt Idler Pulley Toothless
15. GT2 Pulley 20 Teeth 5mm bore 6mm Width 20T
16. TFT 2.4 Inch Touch Screen Display RepRap Smart Controller Panel
17. 5015 Blower Fan
18. Raspberry Pi Electronics Mount from Thingiverse
19. 3x 350mm MGN12H Linear Rails
20. 2x High Torque Stepper Motors