tomasaxerot / smartthings Goto Github PK

Tomas, thank you for developing this handler code. It's the only thing that has made my Bosch ISW-ZPR1-WP13 work! Thanks.

However, I cannot get Amazon Alexa to use detection from this device to do anything. I can't turn on lights when the motion is detected and I thought that should be something it has automatically. Can this feature be added to your code or does this have to be added to an Amazon Alexa skill?

Thank you!

The new Smartthings app doesn’t work with the device handler in this repository. If a new branch could be created with a fix that would be much appreciated.

Hi,
The code executing against nibe uplink api works for the main part. It does not return power consumption and it looks like Nibe may have removed it from the API? The various temperatures are returned however only one of them is displayed in the smart app.
Is there something wrong with the app?
Thanks
Adrian

4d948dcd-aa21-42da-acd9-9ef8772db575 8:13:36 PM: debug 43084: 0 *** THIS IS DISPLAYED but incorrect***
4d948dcd-aa21-42da-acd9-9ef8772db575 8:13:36 PM: debug 10001: -32768
4d948dcd-aa21-42da-acd9-9ef8772db575 8:13:36 PM: debug 40013: 49.6
4d948dcd-aa21-42da-acd9-9ef8772db575 8:13:35 PM: debug 40004: 19.3
4d948dcd-aa21-42da-acd9-9ef8772db575 8:13:35 PM: debug 40033: 22.9 *** THIS ONE DISPLAYED**

I'm attempting to implement the Bosch motion sensor in another application (a home-grown one) but I'm having a lot of trouble trying to get it to remain working after sometimes as short as an hour.

Would you be willing to capture traffic, ideally from the time it initially connects, so I can see if SmartThings is setting something on the device I am not?

I have not implemented OTA, which may be part of the issue, but I'm not sure. I do get zone updates while it's in test mode, and for a while afterwards, but at some point the alarm1 flag is set, and no further messages will arrive at my IAS client implementation.

I applied your code to my SmartThings and the Bosch motion sensor paired perfectly, but from the beginning it lists the battery as 1%. I tested all the batteries that came with the unit and they were brand new, but tried with other new batteries and the same thing. I've tried un-pairing and re-pairing but still no luck. I've also noticed that it only works for about 5-10 minutes after being mounted on the wall. If I take it down and press the small trigger switch on the back of the unit it starts working again, mount it on the wall, and 5-10 min later, stops working again. I'm available for any troubleshooting necessary. I'm unsure whether these are known issues, or if I possibly received a bad sensor. Thank you in advance for your help!

Add possibility to start a ventilation boost

Add possibility to start a hot water boost

hi i an using Visonic Door/Window Sensor handler for xfinity zigbee open close sensor its working fine but there is a problem with that, it drain battery so quick, may be in month can you please fix it. i will really appreciate ityou can reply me on [email protected]