Python library for reading RFID tags using a PN5180 with a Raspberry Pi.
Currently only implemented ISO15693
- Read UID from card (Inventory Command).
- Read up to 16 cards at the same time, JUST BECAUSE YOU CAN (actually tested only with up to 3 cards).
- Support for ISO14443 missing
- Support for advanced commands
- Error detection and recovery (Oh yes, unfortunately it's missing)
Tested with Python 3.7 - Suggested use of virtual environment.
Libraries:
- spidev - https://pypi.org/project/spidev/
- RPi.GPIO - https://pypi.org/project/RPi.GPIO/
pip install spidev
pip install RPi.GPIO