sector (german Kreissektor) seems not to work about webvisu HOT 5 CLOSED

Okay, I see the problem. The IDE allows to manipulate the piechart also with the corner positions. I thought this is only possible with start and end angle. I will fix it.

from webvisu.

Should be fixed now.

from webvisu.

It is better, but not yet perfect. I have two pumps in my visu. One in horizontal orientation and one in vertical. In the horizontal the sector is in the wrong (right) half:

In the vertical, the angles are a bit wrong, it should be exactly 180 degrees, but it is a little less (there should be no white stripes between the sector in the lower half and the triangle in the top):

But it is also possible, that the original is a bit less than 180° and the java visu shows it not really exact so that the mistake is not visible.

from webvisu.

There was a problem with the calculation of the sign of the angles. Should be now really be fixed in 1.0.13-2.
There are no polylines in the vertical symbol of pump? Is that intentional? I will work on the other bugs after my final exam on 6. january. Thanks for your comments!

from webvisu.

Now it works. I think the problems with the vertical pump are problems in my visu, that I didn't notice before (the missing polyline around the triangle is definitely an error in the visu, the white stripe, I'm not quite sure yet).
Thanks a lot for your great work :-))
I wish you good luck in your final exams

from webvisu.