tmjo / heos_custom Goto Github PK

After downloading and enabling through the custom HEOS integration, I am unable to log into my account. If I search for the 'heos_sign.in' service, it doesn't appear in Home Assistant. I'm not sure if I'm missing something

First of all thank you for this great work!

After installing your configuration all my HEOS devices are shown as unavailable in home assistant. Configured all devices with the original integration, also tried to reset everything and start by configuring everything with the custom integration. In this case the integration can be set up, but no devices are shown/none can be set up.

Am I doing something wrong or did somebody experience the same problem and solved it?

I have three speakers, ( 3 x 250 denon heos) all of which can be added if I enter the ip address for them, but only the speaker I enter the ip for stays active and the other goes offline after a few minutes. if I then remove heos and enter ip of one of the speakers that are not available, then that speaker works again. however, all three speakers are always active in alexa or heos own mobile app the wifi signal is 100% and i tested both 2.4ghz and 5ghz band, it is only in homeassistant they end up as inaccessible if I look in the log nothing is visible. to get the speakers back in home assistant, I havto heos and then pull the cord out of the speakers then they go in for a while before it happens again. sometime, it has worked to enter ip for one of the other speakers and then press update in the heos integration, the others have appeared for a while again.

So I have 2 receivers. This means I have two scenario's:

1. I am playing on the living room and want to add the lounge
2. I am playing on the lounge and want to add the living room

This is fine and seems to work correctly. I get issues when the following occurs.

1. I am playing on the living room
2. I run an automation 'add lounge to living room'
3. I (accidentally) run an automation 'add living room to lounge'
4. I try to unjoin, this failes.
5. I manually unjoin (using the app)
6. I join using one of either automations
7. I still cannot unjoin using the automation
8. After rebooting the whole lot I managed to get it to work, but trying the same it failed once more.

I also have the following:

• When I add the lounge to the living room, I cannot unjoin the living room and keep the lounge active, or vice versa.
  Is it possible to add that functionality, or the option to 'change' master?
  That is the reason I tried the second join command, but as you can see without success.

Since version 2021.12 of Home Assistant, this warning pops up in the logs:

WARNING (MainThread) [homeassistant.helpers.frame] Detected integration that accessed discovery_info['ssdp_location'] instead of discovery_info.ssdp_location; this will fail in version 2022.6. Please report issue to the custom component author for heos using this method at custom_components/heos/config_flow.py, line 29: hostname = urlparse(discovery_info[ssdp.ATTR_SSDP_LOCATION]).hostname

If you'd like i can try to submit a PR fixing this deprecation?

Hi, I have the following scenario, with a possible solution, if HEOS allows that.
When I start playing on my living room receiver, I go upstairs and the office speaker joins, it is impossible to unjoin the living room. When I run that command, actually the office unjoins the living room since the living room is the master.

This makes it hard to control all zones, since the master cannot unjoin.

Would it be possible to have the app generate a virtual HEOS speaker that acts as the master? This way, you can play something on that master, and join/unjoin any speaker of receiver without running in to complexities about the master.

If this is not possible, I'll be looking for another solution but it might be nice if it is possible.